The K Body® is a clamp designed to remain parallel when pressure is applied. The K-Body® is considered by many
to be the best parallel clamp in the industry for a variety of reasons. First, it is always at 90 degrees, and has a very
large clamping surface. The K-Body® also has a glue resistant surface and enables a woodworker to achieve 1100
lbs of nominal clamping force. You can also use the K-Body® as a powerful spreader!

Bessey K-Body Cabinet Maker Package

KP Framing Blocks come with any of
the Cabinet Maker package. Buy any
one of these packs with the KP Blocks
and SAVE!

Bessey K-Body Clamps 4 Pack

Buy your K-Body Revo's in a convenient package
and SAVE!

The Bessey K Body REVO Variable Jaw is a replacement variable jaw offered as a single unit for the Vario K Body REVO

K Body REVO jaw pads protect material surfaces from marring.

• pads slide on & off in molded channnels on fixed and moveable jaws of K Body REVO
• resistant to glue, varnish, paint, & grease.
• can be washed with soap and water or in dishwasher
• molded polyamide

Pivoting jaw self aligns on tapered & irregular shaped materials, molded polyamide

• Pivoting jaws are packed in sets of 2
• KR-AS slides on and off of fixed and moveable jaws
• Perfect for holding materials that are irrregularly shaped
• Pivoitng jaws easily slide onto channels in fixed and stationary jaws, after removing standard jaw pads
• Pivoting jaws can used above and below rail and can be stacked for special applicatons

Rail protection pads snap onto rail and prevent clamped material from contacting steel rail

• Fits all Beesy K Body clamps
• Protects work material from accidental damage by contact with rail surface
• Rail protection pads are designed so that Besssey TK-6 clamps can be used to attach Bessey K Body REVO clamps to work surfaces
• molded polyamide

Replacement End Piece Stop for Bessey KR-EC K Body REVO Fixed Jaw Parallel Clamps.

Replacement Tail for the Bessey K-Body.

X-Stender™
For Bessey® K-Body ® Clamps

Ever have a project that requires an 80" long clamp? You don't have to invest all that money on a clamp that you will
only use once. If you already own Kbody® clamps then this is a must have item for your workshop. The Extender will allow you to take any two K-body® clamps and turn them into one long clamp. Example: two 40" clamps will make one 80"clamp! Durable construction with no loss of strength or clamp parallelism. The Extender does not interfere with the top edge of the bar,allowing your stock to stay nice and flat
during glue up. The K-body® Extender is perfect for large, oversized glue ups.

A new mini version of the popular K Body Clamp. The UniKlamp offers of 11 square inches of jaw surface: clamps flat, round or odd shapes; jaws encased in glue resistant, non-marring polyamid; profiled rail minimizes flexing and bending; Acme thread for smooth action and long life. Jaws reverse to use clamp as a spreader. Clamps exert 550 pounds of pressure. Available in 6"and 12" opening sizes.