Robert Sorby Patriot Woodworking Chuck

Chuck is 4" in diameter and weighs approximately 4 lbs.
Made in Sheffield, England.


Patriot Chuck Set Includes:

  • the Chuck

  • a set of 2" Jaws

  • a Woodscrew

  • a Chuck Key

  • and an instruction manual

The new Patriot lathe chuck is the latest new product from Robert Sorby. It comes after many years of experience in selling, marketing and distributing another chuck. Hence the design incorporates all the key features which turners look for in a scroll chuck: - compact design which does not strain lathe bearings yet is ideal for all sizes of project - inserted system so there is a size to fit almost every lathe

  • all jaws are perfectly matched so there is no need for tiresome number matching

  • the single key operation with positive location requires only the lightest of touches

  • key is articulated to allow access behind large projects

  • true compression angles on drive and driven gear ensure smooth operation every time

  • jaws stops prevent slides from working loose

  • wide selection of useful jaws give additional versatility - jaws dovetailed on inside and outside face

  • additional serrated teeth on jaws give extra grip (see below)

  • enclosed back protects gearing against dust

  • backplate is removable for easy maintenance and cleaning

  • comes complete with 2" jaws and woodscrew

  • English instruction manual supplied

 

As we were starting with a clean sheet of paper,
there were no compromises in the design of this new chuck.

 



No. Description
Price
Quantity
11096
Patriot Woodworking Chuck LRSPC - No Insert
$219.99
11097
Patriot Chuck 1' x 8 tpi insert LRSJ
$24.99
11098
Patriot Chuck 1-1/4' x 8 tpi insert LRSJ
$24.99

 

 

Robert Sorby Patriot Chuck
Accessories

1" Jaws For Patriot Chuck

1" Jaws For Patriot Chuck
Jaws only - chuck not included.

1" Jaws. With a fine internal and external dovetail, these 1" jaws are perfect for gripping miniature projects

No. Description
Price
Quantity
11099
1" Jaws For Patriot Chuck LRSJ1
$47.99
Product Divider Image

1-3/8" Jaws For Patriot Chuck

1-3/8" Jaws For Patriot Chuck
Jaws only - chuck not included.

1.3/8" Jaws. Designed for smaller projects like boxes and bowls up to 6".

No. Description
Price
Quantity
11100
1-3/8" Jaws For Patriot Chuck LRSJ15
$52.99
Product Divider Image

2-3/4" Jaws For Patriot Chuck

2-3/4" Jaws For Patriot Chuck
Jaws only - chuck not included.

2.3/4" Jaws. For larger projects and bowls up to 13" where a little extra grip is required.

No. Description
Price
Quantity
11101
2-3/4" Jaws For Patriot Chuck LRSJ3
$69.99
Product Divider Image

3-1/2" Jaws For Patriot Chuck

3-1/2" Jaws For Patriot Chuck
Jaws only - chuck not included.

3.1/2" Jaws. Intended for bowls up to 16" needing substantial holding power.

No. Description
Price
Quantity
11102
3-1/2" Jaws For Patriot Chuck LRSJ4
$89.99
Product Divider Image

Pin Jaws For Patriot Chuck

Pen Jaws For Patriot Chuck
Jaws only - chuck not included.

1" Pin Jaws. The extra length of these jaws makes them suitable for awkward pieces of wood like burrs. Dovetailed on the inside and outside they are ideal for small projects or tall turned items like pepper-mills.

No. Description
Price
Quantity
11103
Pin Jaws For Patriot Chuck LRSJP
$63.99
Product Divider Image

Bowl Reversing Jaws For Patriot Chuck

Bowl Reversing Jaws For Patriot Chuck

Jaws only - chuck
not included

Bowl Reversing Jaws. Designed for finishing the outside and foot of a bowl. Lightweight, but extremely strong solid aluminum construction with 10 different location points to hold a variety of sizes of bowl. Rubber grips hold the project in place without causing damage .Maximum bowl diameter 9". 10" capacity over bed bars.

No. Description
Price
Quantity
11104
Bowl Reversing Jaws For Patriot Chuck LRSJBR
$89.99
Product Divider Image

Deep Grip Jaws For Patriot Chuck

Deep Grip Jaws For Patriot Chuck
Jaws only - chuck
not included

Deep Grip Jaws.The deep sides of these jaws make them ideal for large logs or awkward pieces of wood. They come with both internal and external dovetails to hold cumbersome pieces securely.

No. Description
Price
Quantity
11105
Deep Grip Jaws For Patriot Chuck LRSJDG
$79.99
Product Divider Image

Face Plate Ring For Patriot Chuck

Face Plate Ring For Patriot Chuck
Jaws only - chuck
not included

Face Plate Rings.The design of these rings incorporates a 2" dovetail to fit standard 2" Patriot jaws. They work like ordinary face plates but are much more straightforward and convenient to fit. Available in two sizes: 3.1/8" outer diameter for smaller projects and 4.3/4" for larger ones.

No. Description
Price
Quantity
11106
3-1/8" Face Plate Ring For Patriot Chuck LFPR80
$25.99
11107
4-3/4" Face Plate Ring For Patriot Chuck LFPR120
$29.99
Product Divider Image

4-1/4" Jaws For Patriot Chuck

4-1/4" Jaws For Patriot Chuck
Jaws only - chuck
not included

4.1/4" Jaws. These jaws enable a much bigger recess or spigot to be held and are hence designed for bowls and platters over 16"

No. Description
Price
Quantity
11108
4-1/4" Jaws For Patriot ChuckLRSJ5
$79.99
Product Divider Image

Long Nose Jaws For Patriot Chuck

Long Nose Jaws For Patriot Chuck

Long Nose Jaws .These jaws have a reach of 4" allowing bowls to be remounted internally. The shape of the jaws allows easy access to the back of the project. Dovetailed internally and externally for extra versatility.

No. Description
Price
Quantity
11109
Long Nose Jaws For Patriot Chuck RSJLN
$89.99
Product Divider Image

Zero Jaws For Patriot Chuck

Zero Jaws For Patriot Chuck

These innovative jaws allow the turning of extremely fine, detailed pieces like lace bobbins as they close right down. The unique dome shape enables the turner to work close to his project. At the same time the dome can be used for internal gripping of larger projects without the fear of marking.

No. Description
Price
Quantity
11110
Zero Jaws For Patriot Chuck LRSJZ
$89.99
Product Divider Image

Pen Jaws For Patriot Chuck

Pen Jaws For Patriot Chuck
Jaws only - chuck
not included

These Jaws will hold your pen blank central so you can drill on the lathe. A ā€œVā€ groove in both jaws ensure you have a tight secure grip of the pen blank. Mount your drill chuck into your tailstock and simply wind in the drill. With these jaws being mounted on a lathe, you have more control over the speed of the motor and a much better control of the feed speed. These jaws have been designed to fit a Robert Sorby Patriot Chuck .

 

Specifications for the Pen Jaws

  • Minimum Internal: 1/4"
  • Maximum Internal: 1"
No. Description
Price
Quantity
11111
Pen Jaws For Patriot Chuck LRSJPEN
$46.99
Product Divider Image

Patriot Wobble Chuck

Patriot Wobble Chuck

The Wobble Chuck is an inexpensive introduction to off-center or eccentric turning, the Wobble Chuck fits in the standard 2" jaws of the Patriot chuck in the same manner as a faceplate ring. The workpiece can be held by three screws - like a faceplate - or by a single wood screw - like a screw chuck - or by both means. It is then off-set by rotating the upper section of the Wobble Chuck. Ideal for goblets with off-set stems. A great opportunity to experiment with novel projects.

No. Description
Price
Quantity
11112
Patriot Wobble Chuck LRSWC
$99.99
Product Divider Image

Custom Jaws For Patriot Chuck

Custom Jaws For Patriot Chuck

Custom Jaws. Made from high quality nylon, these jaws can to shaped using regular turning tools to create a shape to meet the needs of a specific project.

No. Description
Price
Quantity
11113
Custom Jaws For Patriot Chuck LRSJC
$31.99
Product Divider Image

Drive Center For Patriot Chuck

Drive Center For Patriot Chuck
Drive Cent Only
Chuck Not Included

Drive Center. A simple but highly effective four-prong drive which fits directly into the jaws of the Patriot chuck.

No. Description
Price
Quantity
11114
Drive Center For Patriot Chuck LRSPDC
$19.99
Product Divider Image

7/8" Steb Drive Center For Patriot Chuck

Steb Drive Center For Patriot Chuck
Drive Cent Only
Chuck Not Included

Using the same principles as the original patented Steb center r the Steb Drive conveniently fits in the jaws of a Patriot chuck. Its serrated teeth and spring-loaded center. pin create an unparalleled grip on wood.

No. Description
Price
Quantity
11115
7/8" Steb Drive Center For Patriot Chuck
$64.99

 

 

 

Return to Robert Sorby Index