Login e-Direct Sign up Cataloge Request Shopping Cart Home Page Home Page Product Index About Us Customer Service Shipping Ordering Retail Store
 

 


Unfortunately Jorgensen has shut there doors after 100+ years of business
do to unforeseen circumstances. These are the last of the Jorgensen® Clamps in our inventory. There are no back orders or rain checks on these clamps since we can no longer get them and may be removed from your basket if oversold.

Jorgensen Logo

Parallel Bar Clamp

Jorgensen Parallel Bar Clamp

These 90-degree parallel steel bar clamps have more benefits and enhanced features than any clamp on the market today. Cabinet Master Clamps have reinforced cast steel jaws that are protected with a durable non-marring plastic and feature a 30 larger clamping area that enables a deeper reach than other parallel bar clamps. Multiple clutch disks are made from hardened and plated round edge high carbon steel to give greater support along the 1-3/16" x 3/8" steel bar. Large solid maple handles are easy to grip and can apply up to 1,000 lbs. of clamping pressure. Remove the detachable end stop, and you can reverse the heads for spreading. The same end stop is also designed as a support, keeping the clamp upright for easy, one-handed use. Made in the USA.

Features:

  • 90 degree parallel jaws
  • 30% larger clamping surface than the competition
  • Reversible head for spreader clamp feature
  • Built-in clamp stand for easy adjustment
  • 10% longer screw travel than the competition
Item# Description Price Quantity
700
36" Jorgensen Parallel Bar Clamp
$52.99
701
40" Jorgensen Parallel Bar Clamp
$57.99

Product Divider Image

Jorgensen Logo
E-Z Hold® Expandable Clamps
Medium Duty Bar/Spreader

E-Z Hold® Expandable Clamps

The JORGENSEN E-Z Hold Bar Clamp has an exclusive patented feature to expand the opening capacity by joining two clamps together with no tools or added accessories needed. The patented head design allows any two JORGENSEN E-Z Hold Bar Clamps to be joined together for greater clamping capacity. By quickly flipping the head you can join two clamps together and also increase total clamping capacity by 6-Inch over the original two clamps. Example: Two 12 inch Bar Clamps joined together will give you one clamp with a 30 inch opening capacity. With every two clamps you buy, it's like getting a third, larger clamp for free. The JORGENSEN E-Z Hold Bar Clamp can also be converted to a spreader clamp. Features also include 76% more clamping force than our competition, easy/comfortable one-handed clamping, 3-3/8” deep reach jaw with protective pads, contoured comfort grip and quick release lever. The Chicago based Pony Tools Inc. which was established in 1903 is the manufacturer of all JORGENSEN Bar Clamps. The JORGENSEN E-Z Hold Bar Clamps are imported from Taiwan. Holding Capacity 300 lbs.

Features:

  • Connect two ISD-3 clamps to make one large clamp
  • Exclusive, patented design, only clamps like it on the market today
  • 76% more clamping force than competition
  • New quick release knob for fast and easy changeovers
  • 300 lbs Clamping Force
E-Z Hold® Expandable Clamps E-Z Hold® Expandable Clamps E-Z Hold® Expandable Clamps
E-Z Hold® Expandable Clamps E-Z Hold® Expandable Clamps E-Z Hold® Expandable Clamps
Item# Description Price Quantity
20079
12" Jorgensen® E-Z Hold® Medium Duty - 33412
$23.99
20080
18" Jorgensen® E-Z Hold® Medium Duty - 33418
$24.99
20081
24" Jorgensen® E-Z Hold® Medium Duty - 33424
$26.99

Product Divider Image

Jorgensen Logo
E-Z Hold® Expandable Clamps
Light Duty Bar/Spreader

The Jorgensen E-Z Hold Light Duty Bar Clamp is ideal for light duty woodworking, hobby, craft, and model projects, and can also be converted to a spreader clamp. Features include easy/comfortable one-handed clamping, 2-1/2" jaw reach with protective pads, contoured comfort grip, and quick release lever. 6" jaw opening, load limit 150 lb.

Features:

  • Jorgensen brand light duty bar clamp
  • Easy, comfortable one hand clamping
  • Has 150 lb. of clamping force
  • Quick-release lever
  • Deep-reach jaw
  • Fixed head reverses for use as spreader function
Item# Description Price Quantity
20076
6" Jorgensen® E-Z Hold® Light Duty - 33406
$14.99
20077
12" Jorgensen® E-Z Hold® Light Duty - 33412
$16.99

Product Divider Image

Jorgensen Logo
E-Z Hold® Expandable Clamps
Hobby/Craft Bar/Spreader

The Jorgensen E-Z Hold Hobby Craft Bar Clamp is ideal for hobby, craft, and model projects and can also be converted to a spreader clamp. Features include easy/comfortable one-handed clamping, 1-1/2" jaw reach with protective pads, contoured comfort grip, and quick release lever. 4" jaw opening, load limit is 50 lb.

Features:

  • Easy, comfortable one hand clamping
  • Has 50 lb. of clamping force
  • Quick-release lever
  • Deep-reach jaw
  • Fixed head reverses for use as spreader function
  • 1-3/8" throat depth
Item# Description Price Quantity
20074
4" Jorgensen® E-Z Hold® Hobby/Craft - 33404
$4.99
20075
8" Jorgensen® E-Z Hold® Hobby/Craft - 33408
$5.99

Product Divider Image

Jorgensen Logo
Heavy Duty Steel Bar Clamps

 

JORGENSEN Heavy Duty Steel Bar Clamps are ideal for all types of heavy duty clamping and is a workhorse for its size and design. They are used by do it your selfers, hobbyist, carpenters, cabinet makers, woodworkers, metalworkers and professional trades people of all types. Protective pads made of thick, durable plastic protect your work. Clamps rest parallel on work surface for ease of work placement and adjustment. It is a sliding head design: the sliding head is threaded to accommodate the screw with large handle and swivel pad. All adjustments are made in the moveable sliding head, making this style fast acting, easy to open and close and suitable for close quarters clamping. You can easily move the sliding head up and down the bar. The 1/2 inch steel screw with a varnished hard wood handle and 1-3/16 inch diameter plated steel swivel can be tightened or loosened to meet your exact pressure needs. It has a 3 inch reach and a 1,000 pound load limit. The strong, light weight 1" x 5/16" steel bars are plated to be rust resistant. The Multiple-Disc-Clutch design consist of three hardened plated steel clutch disc and one spring which allows the sliding head to hold securely at any point along the bar. The iron castings have an orange baked enamel finish. The Chicago based Pony Tools Inc. which was established in 1903 is the manufacturer of all JORGENSEN Bar Clamps.

Maximum load limit is 1,000 pounds

Item# Description Price Quantity
20072
12" Heavy Duty Steel Bar Clamps 3712-HD
$16.99

Product Divider Image

Jorgensen Logo
Jorgensen / Pony Steel Bar Clamp

Jorgensen / Pony Steel Bar Clamp


New Handle

Note:
Jorgensen is in transition of phasing out all wooden handle (seen in top image) to the new handle (seen lower image). If you have preference on one or the other Please call before ordering for availability.

These bar clamps have a 2-1/2” reach and are our most popular regular-duty clamps. Used by home crafter's, cabinetmakers, woodworkers and metalworkers alike, these easy to open and close clamps are suitable for “close quarters” clamping. This clamp features: 2-1/2” clamping reach from edge of bar to center-line of screw 1/4” x 3/4” plated, a round-edge, high-carbon steel bars with 10,000 lbs. psi tensile strength, 3/8” cold-drawn steel screws with smoothly cut U.S.S. threads malleable and/or ductile iron; powder coated orange finish castings. The Multiple-Disc- Clutch holds securely at any point along the steel bar of the clamp.

Item# Description Price Quantity
682
36" Jorgensen / Pony Steel Bar Clamp
$16.99

Product Divider Image

Jorgensen Logo
Jorgensen / Pony Light Duty Bar Clamp

Jorgensen / Pony Light Duty Bar Clamp


New Handle

Note:
Jorgensen is in transition of phasing out all wooden handle (seen in top image) to the new handle (seen lower image). If you have preference on one or the other Please call before ordering for availability.

These light-duty style bar clamps have a 2” reach. Used for light-duty clamping, a workhorse for its size and design. Use in hobby-craft, light-duty woodwork, home-shop and do-it-yourself projects. Features: 2” reach, 5/8” X 3/16” plated bars, round-edge, high-carbon steel. 5/16” cold-drawn steel screws orange baked enamel finish malleable iron castings hardened, plated, high carbon steel multiple-clutch-discs 3/4” diameter swivels, solid maple handle, 2 soft durable plastic pads press fitted and riveted fixed-heads.

Item# Description Price Quantity
690
4" Jorgensen / Pony Light Duty Bar Clamp
$6.99
691
6" Jorgensen / Pony Light Duty Bar Clamp
$7.99

Product Divider Image

Jorgensen Logo
Jorgensen / Pony
90° Corner Angle Clamp

Use this clamp for miter/butt joints. The angle clamp is perfect for framing and cabinet assembly.

Features:

  • 2-1/2” miter/butt joint capacity
  • 1-1/8” T-joint capacity non-marring plastic coated die cast jaws
  • rear jaw swivel for easy adjustment on material thickness
  • handles with acme threads for strength
Item# Description Price Quantity
705
Jorgensen 90° Corner Angle Clamp
$29.99

Product Divider Image

Jorgensen Logo
3/4" Pro Pipe Clamp

Jorgensen 3/4" Pro Pipe Clamp
Note: Pipe not included

Jorgensen 3/4-Inch Pro Pipe Clamp Fixture features: wider and taller stance, taller and wider jaws, built-in clamp stand, longer screw and built-in clamp hanger. Clamping jaws 2-1/8`-Inch. It sits 2-1/2`-Inch above work surfaces. Ideal for metalworking, woodworking and frame assembly. For applications that range from do-it-yourself to industrial production. Mounts on any length 3/4-Inch black pipe with both ends threaded (pipe not furnished). Iron castings are iron with orange and black baked-enamel finish. The 5/8-Inch diameter steel hardened screw has a crank-type handle. The multiple-disc-clutch assures flawless clamping pressure. From the maker's of the line of Pony Pipe Clamp Fixtures.

Features:

  • Clamping jaws 2-1/8"
  • Clamp sits 2-1/2"above work surfaces
  • Mounts on any length 3/4" black pipe
  • Built-in clamp stand, longer screw and built-in clamp hanger
  • Wider and taller stance, taller and wider jaws
Item# Description Price Quantity
20062
Jorgensen 3/4" Pro Pipe Clamp - Fixture #55
$17.99

Product Divider Image

Jorgensen Logo
Style J Adjustable Handscrew Kits

Jorgensen Adjustable Handscrew Clamp Kit

The Jorgensen J Kit is for Do-It-Yourself Handscrew Kits that are intended for woodworkers who want to make their own jaws. Jaw construction and assembly instructions are included. Kits provide the same high-quality materials as used in the JORGENSEN Handscrews.

Item# Description Price Quantity
9165
12" Jorgensen Adjustable Handscrew Clamp Kit
$15.99

Product Divider Image

Jorgensen Logo
Benchdog

Jorgensen Bench Dog

The 2" steel post fits in a 3/4" round hole. The 2 1/4" x 1" x 1/4" dog plates rests on top of your workbench. The bench dog is used in conjunction with a vise dog for securing your work. This is our most economical bench dog.

Features:

  • Bench dog is for securing work when used in conjunction with a vise dog.
  • Steel 2" dog fits 3/4" hole in bench top.
  • The 2 1/4" x 1" x 1/4" dog plate rests on top of your workbench.
Item# Description Price Quantity
688
Jorgensen Bench Dog
$4.99

Product Divider Image

Jorgensen Logo
Jorgensen Hand Clamp

Jorgensen Hand Clamp

Dual Durometer Handle Design for Comfort. Non-Marring Jaws & Riveted Head Assembly Clamps tightlywith just a squeeze and releases with the press of a lever. Available in two sizes: 2-1/2” Opening Capacity and4” Opening Capacity.

Item# Description Price Quantity
708
4" Jorgensen Hand Clamp
$7.99

Product Divider Image

Previous Page