Call Toll Free 1-888-512-9069
Shopping Cart

4" Router Table Dust Port

4" Router Table Dust Port

The 4" Router Table Dust Port will fit on just about any router table fence system.

Item #441 - 4" to 2-1/2" Reducer can be used in combination with the 4" Router Table Dust Port. The small end on the 4” to 2-1/2” reducer fits perfectly inside the right angle port so you can then attach a 4” hose to the larger end of the reducer with a hose clamp.

Item# Description Price Quantity
386 4" Router Table Dust Port $4.99
441 4" to 2-1/2" Reducer $3.99
469 Router Table Dust Port Combination #386 & #441 $7.99

2-1/2" Extended Router Table Dust Port

2-1/2" Extended Router Table Dust Port

2-1/2" Extended Dust port directly accepts a standard 2-1/4" Shop-Vac® hose end in the dust port opening. No hose clamp is required for this type of connection. You can easily attach a standard 2-1/2” dust collection hose around the outside of the extended dust port opening with A single hose clamp. The fitting itself attaches to the back of most router fences.

Item# Description Price Quantity
452 2-1/2" Extended Router Table Dust Port $4.99

2-1/2" Low Profile Dust Port

2-1/2" Low Profile Dust Port

2-1/2 Low Profile Dust port directly accepts a standard 2-1/4" Shop-Vac® hose end in the dust port opening. You can also attach a standard 2-1/2” dust collection hose around the outside of the dust port opening with a single hose clamp. The fitting itself attaches to the back of most router fences with two standard wood screws. The low profile makes this fitting an excellent add-on to any drill press fence system.

Item# Description Price Quantity
453 2-1/2" Low Profile Dust Port $3.99

2-1/2" Router Table / Bandsaw Dust Port

2-1/2" Router Table / Bandsaw Dust Port

2-1/2" Router / Bandsaw Dust Port is one of the most popular fittings used in creating an airway on you router table, bandsaw or any other machine that does not come with a dust port. Attaches with 4 screws (not included) on each corner. The dust port will accept a 2-1/2” hose. A hose clamp is required for this type of connection. This fitting will also accept a standard 2-1/4" Shop-Vac® hose end, no hose clamp is required for this type of connection.

Item# Description Price Quantity
387 2-1/2" Router Table / Bandsaw Dust Port $3.99

4" Dust Port

4" Dust Port

4” Dust port can be used on machines with 4” openings, such as bandsaws and joiners. Attaches with 2 screws (not included) at the top and bottom. The dust port accepts 4” hose. A hose clamp is required for proper connection

Item# Description Price Quantity
389 4" Dust Port $4.99

2-1/2" Round Dust Port Flange

2-1/2" Round Dust Port Flange

Round dust ports are the perfect way to add a dust port to any machine without one. Attach it directly to your machine with screws (not included). Hose clamps are required for proper connection

Item# Description Price Quantity
504 2-1/2" Round Dust Port Flange $4.99

4" Round Dust Port Flange

Round dust ports are the perfect way to add a dust port to any machine without one. Attach it directly to your machine with screws (not included). Hose clamps are required for proper connection

Item# Description Price Quantity
504 4" Round Dust Port Flange $4.99

4" Bell Dust Port

4" Bell Dust Port

4" Bell Dust Port sets up similar to a flange. It is generally used on larger machines, such as the table saw or joiner. The long neck allows for a 4" hose to be secured in place.

Measures: 9-1/2" long by 4-1/2" wide.

A 4" hose clamp is required for proper connection.

Item# Description Price Quantity
390 4" Bell Dust Port $5.99

4" Elbow Dust Port

4" Elbow Dust Port

4” Flat End Elbow Dust Port Is a great fitting that is fastened directly to your machine when space is limited around the machine. There is no need for all the extra little connector pieces with this one! A hose clamp is required on one end for proper connection.

Item# Description Price Quantity
423 4" Elbow Dust Port $6.99

Mini Gulp Dust Hood

Mini Gulp Dust Hood

Just like it’s big brother the Big Gulp, the Mini Gulp can be used anywhere in the shop where size constraints are an issue. The hood is 13-1/3” x 7-1/4” and accepts a standard 4” dust hose with a hose clamp

Item# Description Price Quantity
404 Mini Gulp Dust Hood $8.99

Quick Dis-Connect Ball Joint Fittings

Quick Dis-connect Ball Joint Fitting
Quick Dis-connect Ball Joint Fitting Quick Dis-connect Ball Joint Fitting with dust hose

#477 - 4" Quick Dis-connect x 2-1/2" Hose end Ball Joint Fitting

The Ball joint fitting is designed to be pressed on to any 4" tapered diameter opening for a quick and easy fit. The Ball Joint prevents kinking of hose at the connection point which allows for great mobility. The opposite end accepts a 2-1/2" hose. A 2-1/2" hose clamp is required on one end for proper connection.

 

#478 - 4" Quick Dis-connect Ball Joint Fitting

The 4" Ball joint fitting is designed the same has 477, but the opposite end accepts a 4” hose. A 4" hose clamp is required on one end for proper connection.

Item# Description Price Quantity
477 4" to 2-1/2" Quick Dis-Connect Ball Joint Fittings $8.99
478 4" to 4" Quick Dis-Connect Ball Joint Fittings $8.99

Big Gulp Dust Hood

Big Gulp
Big Gulp Big Gulp

The Big Gulp works most anywhere. It's a great catch all for dust, chips and debris. The Big Gulp Dust Hood is 12-1/2” x 16” and accepts a standard 4” dust hose with a hose clamp (not included).

Item# Description Price Quantity
403 Big Gulp Dust Hood $22.99

Dust Port Clamp Bracket

Dust Port Clamp Bracket

This universal bracket allows you to clamp dust collection on your workbench, lathe, chop saw, sanding area or any work station in your shop. The head assembly swivels, letting you direct suction right where you need it. Heavy duty steel bracket clamps from 1/4" to 2-1/4" and comes with a 4" steel hose clamp.

Item# Description Price Quantity
480 Dust Port Clamp Bracket $00.00