Our dust collection accessories will make your shop cleaner and safer. The better equipped your dust collection system is the better it will work.

Dust Collector Remote Control Switch

110 Volt Long Ranger Remote Control Switch
110 Volt

220 Volt Long Ranger Remote Control Switch
220 Volt

Turn on your dust collector from anywhere in your shop with the Improved "Long Ranger III" Remote Dust Collector Switch.
Save yourself the inconvenience of walking over to turn on your dust collector when you find you're in the middle of a critical project. Simply press the transmitter on/off button to easily switch your dust collector on or off.

Advantages Of This Improved System Include:

  • Simple, Reliable and
    foolproof operation
  • 5 ft. cord on the receiver module.
  • Heavy duty commercial quality construction.
  • Convenient belt clip on transmitter
  • Available in 110V and 220V versions
  • F.C.C. approved
  • Multiple frequency codes
  • Grounded w/reset button
  • Uses R.F. signal, not affected by: Outside interference by large TV's, Transformers, electrical noise, or 3 Phase Power sources
  • Transmitter need not be aimed directly at Receiver– can go through walls!
No. Description
Price
Quantity
466
110 Volt Long Ranger Remote Control Switch
$64.99
467
220 Volt Long Ranger Remote Control Switch
$74.99
Product Divider Image

New LogoUniversal Linked Dust Hose Mount



Universal Linked Dust Collection Hose Mount



 

Universal Linked Dust Hose Mount with Hose, Table Clamp and dust nozzel

Hose,Nozzle and Table Clamp
Sold Separately

The perfect dust hose mount to place linked hose almost anywhere in your shop. The mount works with a table clamp that allows you to attach it to most table tops, workbenches or anywhere you can get the 3" wide clamp jaw to clamp to. When used in conjunction with a linked hose section (shown in photos) the Universal Dust Hose Mount holds the hose firmly so adjustments to the hose are easy to make. The Universal Dust Hose Mount can also be used with a steel hose clamp to attach the mount to machines like a drill press for dust collection set-up. You can purchase the mount with or without the table clamp. Either package comes with a 4" steel hose clamp.

No. Description
Price
Quantity

471

Universal Linked Dust Hose Mount

$16.99

484
Universal Linked Dust Hose Mount with 1-1/2" - 3" Table Clamp
$21.99
Product Divider Image

Jumbo Dust Pan and Dust Brush

Jumbo Dust Pan and Dust Brush

Have a shop? Have to keep it clean right? Our 17" wide steel dust pan provides plenty of surface area to sweep up
dust and debris. The horse hair brush is made of a solid wood handle with thousands of bristles for fine dust pick up.

 

No. Description
Price
Quantity

1200

Jumbo Dust Pan

$8.99

1199

Horse Hair Dust Brush

$7.99

1297
Jumbo Dust Pan and Horse Hair Dust Brush
$15.99
Product Divider Image

CleanStream Universal Craftsman / Ridgid HEPA Replacement Filter Pro Wet/Dry Vac

CleanStream Universal Craftsman / Ridgid HEPA

GORE™ CleanStream® Pro Filters trap dirt on the surface – just tap or rinse to clean – dirt and debris is removed from the filter. Filters pick up either wet or dry – no need to remove filter when used for water leaks, wet basement, plumbing emergencies and spills. Pro Filter provides HEPA Filtration (99.97% efficient at 0.3 microns) and 1 year satisfaction guarantee.

Fits all Craftsman Red Stripe units 6,8,12,16 and 32 gallons. Also fits Ridgid wet/dry vac 6 gallon and up.

Replaces Craftsman® Filter 9-17816, 9-17907 & 9-17912 and RIDGID® Filter Models - VF4000,VF5000 and VF6000.

Note: This filter does not fit the newer style RIDGID® and CRAFTSMAN® Wet-Dry Vacuums that utilize the Qwik Lock™ Filter Fastening System.

Characteristics

  • HEPA: High Efficiency Particulate Air
  • Works great for Wet or Dry application
  • Easy to clean: tap or rinse
  • Easy to install

Filter Dimensions

  • Height: 8.566"
  • Outside Diameter: 7.37"
  • Inside Diameter: 4.375
No. Description
Price
Quantity
461
CleanStream Universal Craftsman / Ridgid HEPA Replacement Filter Pro Wet/Dry Vac
$34.99
Product Divider Image

CleanStream
Universal Craftsman / Ridgid HEPA Replacement Filter Pro Wet/Dry Vac

CleanStream Universal Craftsman / Ridgid HEPA Replacement Filter Pro Wet/Dry Vac

GORE™ CleanStream® Pro Filters trap dirt on the surface – just tap or rinse to clean – dirt and debris is removed from the filter. Filters pick up either wet or dry – no need to remove filter when used for water leaks, wet basement, plumbing emergencies and spills. Pro Filter provides HEPA Filtration (99.97% efficient at 0.3 microns) and 1 year satisfaction guarantee.

Fits all Craftsman Red Stripe units 6,8,12,16 and 32 gallons. Also fits Ridgid wet/dry vac 6 gallon and up.

Replaces Craftsman® Filter 9-17816, 9-17907 & 9-17912 and RIDGID® Filter Models - VF4000,VF5000 and VF6000.

Note: This filter is designed for the newer Qwik Lock™ Filter Fastening System.

Characteristics

  • HEPA: High Efficiency Particulate Air
  • Works great for Wet or Dry application
  • Easy to clean: tap or rinse
  • Easy to install

Filter Dimensions

  • Height: 8.566"
  • Outside Diameter: 7.37"
  • Inside Diameter: 4.375
No. Description
Price
Quantity
462
CleanStream Universal Craftsman / Ridgid HEPA Replacement Filter Pro Wet/Dry Vac
$34.99
Product Divider Image

GORE™ CleanStream® Universal Replacement Filters for Shop-Vac® and Genie® Wet-Dry Vacuums

GORE™ CleanStream® Universal Replacement Filters for Shop-Vac® and Genie® Wet-Dry Vacuums

GORE™ CleanStream® Filters trap dirt on the surface – just tap or rinse to clean – dirt and debris is removed from the filter. Filters pick up either wet or dry – no need to remove filter when used for water leaks, wet basement, plumbing emergencies and spills. Available with HEPA Filtration (99.97% efficient at 0.3 microns) or High Efficiency Filtration (99.7% efficient at 0.3 microns).

Replaces Shop-Vac® Filters 903-04-00, 903-33-00, 903-34-00, 903-40-00, 903-50-00 and 903-90-00 and Genie series (PB, PH, PSH, 2000, 3000, 4000) and Black & Decker(R) Utility Vacuums (UV800B & UV1000B).

Characteristics

  • HEPA: High Efficiency Particulate Air
  • Works great for Wet or Dry application
  • Easy to clean: tap or rinse
  • Easy to install

Filter Dimensions

  • Height: 7"
  • Outside Diameter: 7.45"
  • Inside Diameter: Multi-fit - 6.00" and 5.75"
No. Description
Price
Quantity
463
GORE™ CleanStream® Universal Replacement Filters for Shop-Vac® and Genie® Wet-Dry Vacuums
$34.99
Product Divider Image

Floor Dust Collector Stand


This "take it with you" dust collection nozzle attaches to your dust collector so you can quickly and easily get rid of dust at machines and work stations everywhere in the shop. The cast nozzle rotates a full 360 degrees and can be angled up to 180 degrees in any position from straight up to straight down. Locking stand adjusts up and down from 24" to 43-1/2". Nozzle measures 1-1/8" x 12-1/2" and has a 4" OD port opening. Steel stand and tubes.

No. Description
Price
Quantity

465

Floor Dust Collector Stand

$59.99

Product Divider Image

Two Stage Dust Separator Lid

2 Stage Dust Separator Lid

This dust collector separator increases the efficiency and capacity of standard dust collection systems. Designed to fit securely on top of a standard 30-gallon metal trash can, this molded ABS fitting is engineered to use cyclonic action to drop out larger particles from the dust flow. The fitting features molded inlets and outlets which can be easily connected to standard systems using 4” flexible hose . You will be amazed at how well it works!! The Dust Collection separator comes in two sizes: 30 gallon can size and 5 gallon size.

No. Description
Price
Quantity

399

30 gallon dust separator lid (fits 4" hose)

$29.99

400

5 gallon dust separator lid (fits 2-1/2" hose)

$21.99

Product Divider Image

Cyclone Dust Separator Lid

Cyclone Dust Collection Lid

The Cyclone Separator with a handle works by drawing the air downward as opposed to horizontally, causing the large debris to settle at the bottom of the can. The separator also has port holes that protrude out to provide an easy hookup for your dust collection hose. The handle on the cyclone lid makes cleaning out the can a snap, simply turn off your dust collector and lift the lid straight up and off of the can for easy removal of the dust and debris. The Dust Collection separator comes in two sizes: 30 gallon can size
and 5 gallon size.

 

No. Description
Price
Quantity

401

30 gallon Trash Can Cyclone Lid (fits 4" hose)

$32.99

402

5 gallon Trash Can Cyclone Lid (fits 2-1/2" hose)

$23.99

Product Divider Image

4" Cyclone Dust Separator Kit

Kit installed in barrel
Barrel and hose NOT included

Make your own cyclonic action dust separator

4" Cyclone Dust Separator Kit Image showing Kit installed and hooked up

Help protect your dust collector from unnecessary wear and tear with our unique Dust Separator Kit. Two elbows and two couplers combine to give you in feed and out feed points when they are installed on a barrel, box, or any container (barrel or box not included) that you would like to capture large wood chips in. The separator works by simply allowing the heavy wood chips to fall to the bottom of the container, while the lighter dust particles get pulled in the out feed port and into your dust collector. This keeps the large debris from slamming into your dust collector’s impeller, which in turn prevents any unnecessary damage to the unit. Separating the large wood chips also keeps your dust collector bag or container from filling up so fast, this means you won’t have to empty it as often! The Dust Separator Kit is perfect for use with Jointers, Planers, Router Table units and more! The Kit includes: 2 ea. 4" Ports, 1 ea. 4" in feed elbow, 1 ea. out feed elbow, 1 ea. hardware pack and 2 ea. 4" turn key hose clamps.

No. Description
Price
Quantity
530
4" Cyclone Dust Separator Kit
$19.99
Product Divider Image
 

Return To Dust Collection Products Index