5” to 4” Reducers are designed to reduce a large five inch hose down to the 4” hose.
Hose clamps are required for proper connection

4” to 3” Reducer is a straight non-tapered fitting that allows you to connect your 4” hose to your 3” hose. Hose clamps are required for proper connection.

4” to 2½” allows you to reduce from a 4” hose down to a 2½” hose. Hose clamps are required for this type of connection or the small end accepts a standard 2¼” Shop-
Vac® hose end. Only one hose clamp is required on the opposite 4” end for this type of connection.

4” to 2½” Threaded Quick Connect is designed to be pressed on to any 4” taper diameter opening for a quick and easy fit. The opposite end accepts a 2-1/2” hose by simply threading it on. No hose clamps are required.

4” to 2¼” Threaded Quick Connect is designed to be pressed on to any 4” taper diameter opening for a quick and easy fit. The opposite end accepts a 2-1/4” hose by simply threading it on. No hose clamps are required.

3” to 2½” allows you to reduce from a 3” hose down to a 2½” hose. Hose clamps are required for this type of connection or the small end accepts a standard 2¼” Shop-
Vac® hose end. Only one hose clamp is required on the opposite 3” end for this type of connection.

3” to 2” Reducer will allow you to connect your 3” dust collection hose to a 2” hose. Hose clamps are required for proper connection .

2½” Screw End Adaptor allows you to attach a 2½” hose to it by just screwing the hose on, and then plug right into most any wet/dry vac and other standard 2¼” openings. No hose clamps are required.

2½” to 1¾” Reducer will allow you to connect your 2½” dust collection hose to a 1¾”” hose. Hose clamps are required for proper connection.

2½” x 1¼” Reducer not only reduces down to 1¼” size opening, it will allow you to plug in to various chop saws, orbital sanders and other power tools with with a
small dust port. Hose clamps are required for proper connection.

2 7/32” x 1½” Reducer is used to reduce a 2 1/2” hose down to a 1½” hose, it can also be used on small power tool ports such as belt sanders, palm sanders and more. Hose
clamps are required for proper connection.

2¼” x 2½” Reducer, reduces in a smaller increment than normal, it only steps down a 1/4” of an inch. The reason for this is, specific machinery setups like Shop-Vacs® can
use this fitting as a plug adaptor for the hose assembly.

2¼” x 1½” Reducer; The large end plugs directly into any standard 2¼” Shop-Vac® opening or any dust collection fitting that accepts a Shop-Vac® hose end. The small end has a 1-1/2” opening that works with a variety of small power tools or a standard 1-1/2” vacuum hose, which is most commonly found on Porter Cable brand hoses.

2½” x 2¼” Reducer is the absolutely perfect reducer to attach your standard 2½” hose directly to most Shop-Vacs®. Clamp on your 2½” hose on the large end and simply
plug the small end directly into to your vac or any fitting with a 2¼” opening.