Extend the EZ Flex hose up to 7 times it's original length and retract it back to it's original size when not in use! This makes EZ Flex hose perfect for any size workshop. Maneuver in, out and around your shop machines without worrying about the amount of slack on the hose. The hose works with standard dust collection fitting sizes (21/2" and 4" - depending what you use). EZ Flex hose is available in two
different lengths and two different diameters: 21/2" and 4" diameters and 3' to 21' length and 4' to 28' lengths. Hose lengths and total stretch are approximate sizes.

Help protect your dust collector from unnecessary wear and tear with our unique Dust Separator Kit. Two elbows and two couplers combine to give you infeed and outfeed points when they are installed on a barrel, box, or any container (barrel or box not included) that you would like to capture large wood chips in. The separator works by simply allowing the heavy wood chips to fall to the bottom of the container, while the lighter dust particles get pulled in the outfeed port and into your dust collector. This keeps the large debris from slamming into your dust collector’s impeller, which in turn prevents any unnecessary damage to the unit. Separating the large wood chips also keeps your dust collector bag or container from filling up so fast, this means you won’t have to empty it as often! The Dust Separator Kit is perfect for use with Jointers, Planers, Router Table units and more! The Kit includes: 2 ea. 4" Ports, 1 ea. 4" infeed elbow, 1 ea. outfeed elbow, 1 ea. hardware pack and 2 ea. 4" turn key hose clamps.

Our black flex hose is constructed of a high grade plastic that allows you to bend and maneuver your hose around your shop machines and other obstacles. The hose is also capable of being used as your main line in your dust collection system or as a simple branch off . You can add splices, Y’s, T’s, elbows, or any fitting that you need, in order to achieve your perfect shop dust collection system.

Spiral reinforced Clear Hose allows easy inspection for locating potential clogs in your duct work. Our clear flex hose is constructed of an abrasion resistant plastic. Since it is clear, the hose allows for visibility on the inside of the line to see any large pieces lodged inside. The hose remains flexible over a wide range of temperatures and will not collapse. Add splices, Y’s, T’s, elbows, or whatever fitting that seems fit for your shop.

Bend it, turn it, twist, pull it, the Stay Put™ hose is perfect for anywhere in your shop. The Stay Put™ hose can be compressed and extended all while holding it's shape no matter how you move it. The versatility of the Stay Put™ allows you to come up with many creative uses for it in the shop, especially on your bandsaw, drill press and scroll saw. Made of rigid polypropylene plastic the hose is plenty tough for everyday shop use. Hose extends from twelve inches to approximately thirty six inches long. The Stay Put™ hose is available in 2-1/2" and 4" diameters.

Stay Put Hose Fittings
We have put together a convenient stay put hose package that includes all the fittings and hose necessary for a quick and simple set up. The kit is available in 21/2" and 4" sizes to work with most vac's or dust collectors. Each kit includes 2 each screw adaptors, 1 each rectangular nozzle, 1 each tapered nozzle and 1 each three foot long stay put hose. The fittings are also available to be purchased separately.

The Stay Put Hose mounting bracket allows you to mount your Stay Put Hose on your workbench, drill press, router table and more! This unique bracket has a removable base that when removed, allows you to slide a universal fence clamp (not included) into the pre-drilled 3/8" hole. This gives you the ability to attach the bracket to most any flat surface like your workbench or router table. With the base attached to the bracket, you can then feed the 4" steel clamp (included) into the pre-milled rectangular slot and attach the unit to most any post in your shop, which is perfect for machines like your drill press. The Stay Put Hose bracket is designed to be used with the Stay Put 21/2" hose only. The universal clamps are available in two sizes according to jaw pad to end of clamp. The clamps can also be used to secure sacrificial table saw fences and router fence stop blocks.

The black super-flex wire reinforced vinyl hose is strong, flexible, and durable. It’s extreme flexibility allow you to easily position it exactly where you want it. Reinforced with heavy duty wire (.050" thick) the hose will not collapse even
under heavy suction. Use the wire to ground your system.

Clear super-flex wire reinforced vinyl hose is strong, flexible, and durable. It’s extreme flexibility allows you to easily position it exactly where you want it. Reinforced with heavy duty wire (.050"  thick) the hose will not collapse even
under heavy suction. Use the wire to ground your system.

Heavy duty PVC hose is a very durable and flexible hose that is perfect for the work shop. The PVC hose is wrapped around a steel wire that can be easily grounded. A tight bending radius allows you to maneuver the hose anywhere in your shop, without worrying about kinks. This heavy duty PVC hose won’t collapse under pressure from your dust
collector and the hose is clear so you can see directly inside to spot any kind of obstruction.

Flex style hose with fittings on both ends of the hose. Fits
Porter Cable models: 345,9345, 7334, 7335, 7336 , 7810. Fits: Mirka Ceros 5" and 6" Sanders. Also attaches to standard 1-1/2” I.D. lines. The intake mount (1” I.D.) attaches to a dust collection hood or tool. Hose is 10’ in length.

Lightweight, flexible, and easy to maneuver, the Summit Small Power tool hose can be used on most any small power tool without getting in the way. The hose is perfect for use with tools like random orbit sanders, routers, biscuit joiners and more. The hose comes with a screw on adaptor and a rubber adaptor that will help adapt the hose to most small power tools. A large fixed screw-lock end is designed to be plugged directly into the vac inlet port and secures with screw-lock mechanism. This hose is designed to be used with the Summit Wet/Dry Vac. The hose measures 16' in length for extra reach and easy maneuverability

Fifty foot grounding kit simply makes your dust collection
system safer by grounding your lines
to prevent static. The kit includes 50 feet
of braided 14 gauge copper wire, grounding screws, wire
nuts and terminal ends for a complete and easy installation process.

Use a hose hanger to run your dust collection hose line throughout your shop. They fasten to just about any spot
on your wall or ceiling simply by driving screws through the flaps on the ends of the hangers. (screws not included).

These spring steel holders mount to the wall in seconds and provide a perfect home for 4" diameter hose and other tools.

There is no need for a flat head screw
driver with these hose clamps. The thumbscrew feature makes it easy to secure these clamps to your hose and
fittings. Simply loosen clamp by turning counter clockwise, place around your hose, and then, place hose on fitting
and secure.

Wire hose clamps work much in the same way as the steel hose clamps. The difference being they grab around the
grooves of the hose to form secure grip around the fitting or port hole. They secure down with a screw driver or a socket.

Hose clamps are a simple but necessary accessory for all dust collections systems. Expand the clamp to a large enough size to fit around the hose, then place hose onto the particular fitting then secure with a screw driver or socket.