• 4 Way measurements: inside, outside, depth and step
• Hardened stainless steel
• Measuring face precision ground and micro lapped  for accuracy
• Aluminum cover and screwed rack
• Shock & dust proof
• Rotating bezel and lock screw for zeroing

The Step Gauge 3D Ruler is the easy way to sep up jobs for all your power tools!

There's no guesswork with the Digi Compass + Divider precision drawing and marking instrument.This one-of-a-kind compass features a large LCD display that shows digital readings in inches, fractions, and metric. Use it as a digital compass to scribe perfect circles or arcs, or for stepping out equal distances in odd or even measurements.

A must for every woodworker, this hardened stainless steel electronic digital caliper is ideal for checking bushings, drill bits, and sizing work where a precise fit is required. Measures in metric, inches and fractional inches up to 6" diameter with the press of a button. This Caliper can also be used for inside, outside, step and depth measurements. A locking screw allows you to lock the caliper in position for measuring and it also has a zero button that "zero's" the caliper prior to use. Supplied in protective plastic case with spare battery.

This digital caliper features the latest in electronic technology with a measuring range of 0 - 6 inches (0 - 150 mm). It is accurate to 0.0005 inches and 0.01 mm.

Say goodbye to hard to read shop calipers.

This NEW Extra Large Readout (2-3/8" x 7/8") Dual Reading Digital Caliper is a must for every woodworker. The hardened stainless steel electronic digital caliper is ideal for checking bushings, drill bits, and sizing work where a precise fit is required. Measures in metric, inches and fractional inches up to 6" diameter with the press of a button. This Caliper can also be used for inside, outside, step and depth measurements. A locking screw allows you to lock the caliper in position for measuring and it also has a zero button that "zero's" the caliper prior to use. Supplied in protective plastic case with spare battery.

This digital caliper features the latest in electronic technology with a measuring range of 0 - 6 inches (0 - 150 mm). It is accurate to 0.0005 inches and 0.01 mm.

3 Way Reading: Inch, Metric, Fraction

Are you ready for precisely fitting joints and perfectly tuned machines? This multi- purpose digital gauge is accurate to within 0.001". It can be used to set the exact height of your table saw blade, your router bit or just about any other machine where you need to set the height. You can raise the gauge to the necessary  height and raise the blade to match, or you can set the gauge on the bit and raise it until the display reads the correct height. It’s also great for leveling the knives and setting the depth of cut on your jointer. Heavy, solid steel base provides maximum stability. Change it from inches to millimeters to fractions and zeroes out with the push of a button.

The Wixey Digital Protractors can be used in any plane.

• 0.1 degree resolution, accuracy, and repeatability
• Sets both miter and bevel angles on almost any machine
• Strong magnets on all blade edges for ease of use
• Blades can be tightened for holding measurements
• 2" wide X 7/8" thick X 4" long
• Compact design for tight locations
  • Sets miter saw miter and bevel angles
  • Great for drill press and band saw tables

The Wixey Digital Protractors can be used in any plane.

• 0.1 degree resolution, accuracy, and repeatability
• Sets both miter and bevel angles on almost any machine
• Strong magnets on all blade edges for ease of use
• Blades can be tightened for holding measurements
• 2" wide X 7/8" thick X 9" long
• Long legs for added versatility
  • Measure work-piece or construction angles
  • Use for marking and layout

The Wixey Planer Digital Readout model WR510 has a new angled display for easy viewing as well as "auto shut off." And like the WR500, it fits most portable woodworking planers.

It easily mounts to Dewalt, Delta, Ridgid, Ryobi, Makita, Craftsman and others. It mounts in minutes and is calibrated in seconds.

It displays the thickness of the wood coming out the back of the planer in inches with fractions or millimeters.

Wixey Planer Digital Readout has been redesigned and now has these new features:

Ideal for router lifts - The Wixey Remote Digital Readout is a kit that can be adapted to a number of woodworking machines. Including router lifts, router tables, and shapers. It is a remote display connected with 3 ft. cord that can be disconnected for easy installation and access.

The easy to install kit requires drilling 2 small holes in your machine using the drill bit supplied. Mounting hardware is included.

Fits router lifts made by Woodpeckers, Jessem, Jointech, and others.

The Wixey Saw Fence Model WR700 fits most high end fence systems and measures up to 60 inches long.

It easily mounts to Beisemeyer, Powermatic, Jet, HTC and other T-Square fences as well as Delta Unifence; and Dewalt, Vega and other round rail fences.

The innovative readout magnetic attachment system allows you to remove and replace your rip fence as quickly as ever without losing calibration.

For More Information
CLICK HERE

This dial has a 2 ½" dial face with a large LED readout. This high quality, easy to read Digital Dial Indicator has three different readout options; Inches, Millimeters and Fractions, all of which can be obtained by a simple push of a button (push the "Hold" button and you can toggle between the three different measurement types once the measurement is made). This precision dial allows you to measure anything from run out on your table saw blade to wobble on your drill press. A "Zero" button allows you to calibrate the indicator easily and quickly, while the "Hold" button lets you keep the current measurement.

Increase the versatility of your dial indicator by turning it into a multi-purpose gauging tool. This 22 piece assorted tip set allows you to change your existing dial indicator tip with one that is just right for the job at hand. From gauging table saw blade height, leveling joiner knives, to fence run-out you will find the right dial indicator contact point for the job in this set. The contact points will fit most any dial indicator with 4-48
threads.

Use this digital inside caliper for fast easy measurement of hole diameters and inside measurements..

This is a must have layout tool for all wood turners. Now you can make a lid fit the first time.

The DigCal 1/2"-6" inside Caliper has:

• spring-loaded arm travel
• chrome finished alloy jaws
• Reads in: inch, metric and fractions
• measuring range 1/2" -6"
• accuracy 0.01"
• comes with 1 extra 3V CR2030 Battery
• 1 year battery life (approx.)

Use this digital outside caliper for fast easy measurement of board thickness and cylinder diameters.

This is a must have layout tool for all wood turners.

The DigCal 0-6" Outside Caliper has:

• spring-loaded arm travel
• chrome finished alloy jaws
• Reads in: inch, metric and fractions
• measuring range 0-6"
• accuracy 0.01"
• comes with 1 extra 3V CR2030 Battery
• 1 year battery life (approx.)

Make quick, accurate inside measurements with these new, high quality, digital calipers. The large LCD display makes reading a breeze, and the readings can be set for inch, metric or fractional measurements. Important and convenient Hold function. Perfect for woodworking, woodturning, carpentry, metal fabrication, etc. Supplied with battery.

• Inch, Metric and Fractional Readings, Hold Function
• Large LCD Display
• Spring-Loaded travel
• Convenient Handle for easier measuring
• Easy Move/Lock System

A must have for any woodworking shop. Now you can easily and accurately measure parts and pieces, measure wood thickness or accurately duplicate projects on your lathe. These digital calipers feature chrome finished alloy jaws with a large LCD display that reads in inch, metric, and fractional (1/64") increments with a measuring range from 0-8" that is accurate to within 0.01". 3V battery and plastic storage case included.

Great Accuracy
for general woodworking projects and more!

The perfect device for measuring the depth or height for many different applications. Use it to measure the height of your router bit, tablesaw blade and more. The multi-gauge can be used vertically, horizontally or even at a 90° angle. The metal rule is self standing with it's heavy duty poly carbonate frame. The unit features a large easy to read digital readout that displays readings in inches, metric or fractions. Also includes 2 hardened steel measuring anvils (flat and pointed) and a lithium battery.

Just position the template to draw perfect corners every time. These templates eliminate the guesswork and inaccuracy of using things like jar lids and rulers. Set includes

This set is the perfect set for easy, quick radius measurement and simple layout. Six acrylic gauges let you measure up to 12 different radii that can range from 1/8" to 2" in size. Each gauge is clearly marked with the corresponding measurements of each size radius. These gauges are great for reference when turning spindles, duplicating your moldings, rounding corners and more. Shown above are radius gauges that are included with the set.

Quickly locates the center of turning stock.

The Incra 6-Inch Precision Marking Protractor lets you plot any angle with ease and absolute accuracy. A metal T-Bar and see-through cross hairs provide perfect alignment against the edge of your work-piece. Remove the T-Bar to work on flat surfaces or to use the 6-inch centering scale with micro-fine marking holes at every 1/32 inches. This marking protractor has micro-fine guide holes at every 45-, 30-, 22.5-, 5-, 1-, and 0.5-degree intervals. Four angle scales, including one for marking narrow stock, suit every need. Its easy on the eyes, incredibly accurate, and just plain fun to use.

Find the center point quickly and accurately with this handy steel center finding ruler You simply align this center finding ruler so that the same measurement appears on both sides of the zero mark. These rigid stainless steel rules make the job of finding the center of any piece of wood very easy. The zero is in the middle with scales in 1/32 “. These rules have a second scale which allows them to be used as regular rulers. They are made of stainless steel with a hard chrome finish. The bottom of the center finding ruler reads 0” - 12” in 16th inch increments.

Find the exact center of any work piece up to 12" wide. In addition to top and bottom micro-fine marking holes at every 1/32" it also has a built-in protractor with guide slots at every 45°, 30°, 22.5°, and 5° interval.

Reproducing complicated patterns is a breeze with General's 10” Contour Gage. The 3” deep fingers mold into the shape of any surface, creating a template which can then be used for making wood trim or linoleum floor installation. The Contour Gage is equipped with a ruler on the body with both inch and millimeter graduations.

Our Flexible Curve Measuring Tape lets you draw perfectly contoured curves without measuring. The curved tape helps in transferring curved designs from your plans or originals. Simply bend to any curve all the way down to a 1" radius - and it will hold, without any spring-back, and as long as you need it. The measuring tape is made with a lead core completely enclosed in flexible plastic. One side of the tape has a raised edge for drawing a pencil line.

Make transfers of large complex curves directly from you work piece or from a standard pattern. Loosen the lock knobs, adjust the steel curves, then simply tighten the knobs and the curves will stay locked in place, which will eliminate any movement. The Steel Flexible Curves are perfect for laying the out of radius' down to 8" on the inside diameter and 9" on the outside diameter. Pencil not included.

French curves are most useful when laying out projects that require smooth clean curved lines. Made of orange transparent acrylic material, with smooth, clean edges that won't warp, this set includes three of the most common curves and shapes used in drawing.

INCRA Precision Marking Rules. At first glance you might think you are looking at an ordinary ruler. But look closer and you will see micro-fine marking holes and slots every 1/16", 1/32" and 1/64" to instantly locate a sharp pencil point or scribe EXACTLY where you want it. No more squinting as you try to line up your pencil on that blur of lines along the edge of your old steel rule. Even when the lighting is less than perfect, you can effortlessly place your mark precisely on target with zero uncertainty, zero parallax and zero eye strain. Who would have thought there was so much room for improvement in the common ruler. There WAS and INCRA RULES is it! Available in 3", 6", 12" and 18" lengths. Engraved stainless steel.

INCRA Bend Rules make dual-surface layouts a snap using the corner slots shown above.

The INCRA Bend Rule is precisely what you need for layout and measurement along the edge of a board or other work piece. We've put micro-fine marking holes at every scale line to instantly locate your sharp pencil point or scribe exactly on target with zero uncertainty and no eye strain! The 90° shape holds it snugly in place while the two scale surfaces let you mark and measure on the top, edge and corners simultaneously! There are even two vertical end scales for drawing precision parallel lines relative to the edge of your work. 

Precise, versatile, and easy-to-use are the words which best describe the Incra Precision Marking T-Rule. Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy. There are micro-fine marking holes and slots at every 1/16-, 1/32-, and 1/64-inch scale position to instantly locate your sharp pencil or scribe exactly on target with zero uncertainty. The Incra T-Rule makes it very easy to draw exact lines in either direction, and with zero uncertainty and no eye strain. Other features include 0- to 3-inch height markings on the end in 32nds, and the option of marking holes every 1/100-inch. The product also comes with a limited 1-year warranty.

Cover any precision marking application with these three-piece marking rule sets. Each set includes one Marking Rule, one T-Rule and one Bend Rule in your choice of 6", 12" and 18" lengths. Each set includes a .5mm mechanical pencil.

Handy inexpensive shop rulers. Use this Aluminum Ruler for all basic measurement needs. Machined to exacting standards, this ruler will provide years of precise measurements. Increments of 1/16" make this a truly versatile and precise tool for any workshop.

This 24” multi-purpose ruler is not’t your typical measuring tool, this ruler measures, it levels, it plumbs and not only that, it also provides a safe, clean cutting edge, so hands and fingers are away from the cutting blade. Horizontal and vertical leveling capabilities. With clearly marked graduations in inches and centimeters. This is sure to become one of your most used ruler in your workshop.

Perfect measurements every time! This stainless steel hook rule simply catches on the end of a board to give you exact and precise measurements. Perfect for measuring of the end or the edge of a board.

These squares can be used as a height or layout gauge by sliding the ruler left or right of the faces. The ruler features
1/8" and 1/16" graduations on one side; the flip-side has 1/32" and 1/64" graduations. Check and mark 90° angles, determining flatness, (layout work - mortise slots, tenons, frame centers), checking fence squareness of, router tables, drill presses and tablesaw's, fences. The 6" Precision Combination square also includes a center head for easily locating the center of round stock, while the 45° miter face, bubble level and scratch awl ensure easy, accurate layout lines.

This is a handy set to have around. Each square is finely ground stainless steel. All have common beam and blade widths and thick nesses which will allow them to be used in combination. 2", 3", 4" & 6" squares.

The Grip 30180 12-Inch Combination Square can be used as a center hand, outside try square, depth gauge, scriber, 90 & 45 degree level, inside try square, and meter square. It is 12-Inches long with markings for inches, centimeters, and millimeters.

Machined to within a .0002 tolerance these high precision squares are designed to ensure complete and total accuracy every time you use them. From squaring your tablesaw fence or saw blade to making sure your bandsaw blade is true, you will be dead on accurate with any of these squares. Each steel square has a steel plate mounted to the base so it is easy to place them on any flat table top surface for easy quick measurements. Lay the square down flat to use the base plate as a guide against the edge of your stock and you now have a super accurate marking tool. The base plates are also removable by loosening the two hex head screws underneath, which helps you to get in tighter more confined areas and can be placed on a surface completely flat for layout and design work. The squares are made from high quality stainless steel to exacting specifications and the 3 pc set includes the following sizes: small - 3" x 2", medium - 4" x 211/16" and large - 6" x 37/8".

The Magnetic Micro Square makes squaring up your table saw, band saw or any piece of equipment, effortless! This precision machinist style square has 2 neodymium magnets embedded in the oversized base. The square sticks firmly to the cast iron table top and allows hands free adjustment of spindles, blades and fences. This is a time saver and greatly enhances accuracy.

The worlds first 3-dimensional try-square. Out performing traditional try-squares the M3-Square is moved just once when marking round all four sides of a component, saving time and reducing the margin for error. Mark width and thickness over pre-molded edges. Strike and replicate angles with integral lockable bevel gauge. M3 Scribe provides the best deep range marking gauge. Factory set to within a tolerance of 1/100th of 1 degree. Re-stable Sheffield steel 9" blade. Includes Tri-Scribe with Pencil and retractable bevel gauge blade.

Kreg Precision Router Table Setup Bars make adjustments to router tables, shapers and table saws very simple and very precise. Unique design straddles the router bit or saw blade to allow for more precise height adjustment. Step on the top edge of each setup bar acts as a gauge to test the depth of your completed cuts. Step on the end of each setup bar used to test the fence depth of a tablesaw blade or router bit. Made from a soft aluminum designed to prevent damage to your router bit or saw blade if contact is made during setup. Set includes 7 setup bars stored in a portable case that protects the bars and makes it easy for woodworkers to locate the correct bar for their application. Sizes: 1/8, 3/16, 1/4 5/16, 3/8, 7/16, 1/2.

• Unique design straddles the Router Bit or saw blade to allow for more precise height adjustment
• Step on the top edge of each setup bar acts as a gauge to test the depth of your completed cuts
• Step on the end of each setup bar used to test the fence depth of a table saw blade or Router Bit
• Made from a soft aluminum designed to prevent damage to your Router Bit or saw blade if contact is made during setup

Made from solid brass, select hardwood and machine steel, these sliding bevels are equipped with a brass wing nut for locking. The blade is blued steel.

Great for setting or checking 45 degree angles in projects such as picture frames. And the price is right too!

• Blue Steel Blade
• Wood Grip
  

Has 2-3/8” wide hardened steel base. Spring tension nut eases depth and angle measuring by securing rule in milled
slot at 90º to base. Permits easy setting of protractor angle to 30º, 45º and 60º settings on one side. 6” etched stainless
steel rule graduated in 64ths and mm on the other side.

Perfect for laying out large circles, this Trammel/Circle Marker Set offers unsurpassed control and accuracy. Each trammel point with steel point and replaceable lead is fully adjustable. Includes a 12” stainless steel ruler which will give you a 24” dia. circle that reads in 16th of and inch and cm. Kit includes extra replacement lead.

This marking gauge features a hardened steel cutting wheel, which slices a line and resists following the grain, which is common with pin marking gauges. Constructed of a 8” steel shaft. Slide the gauge in place then tighten the knurled brass knob to secure it.

Made from aluminum, this handy device allows you to convert most shop rulers into a convenient marking gauge. The single adjustment knob allows you to make quick adjustments for depth, parallelism and squareness. The smooth fence like face runs across the edge of your piece you are marking for accurate markings every time. Simply place your ruler in between the two guide sides and secure with the locking knob and your ready to go. The ruler marking guide can be used on rulers from 7/8" wide to 11/8" wide.

These inexpensive pencil compasses/dividers are made from steel with hardened springs. The compass is available in three sizes - 6”, 8” and 12” which are most commonly used in the woodworking industry.

Designed for reliable and accurate layouts. The finely machined threads run cleanly to secure legs exactly to dimension. Divider legs are ground to a fine, point for perfect layouts. 6” or 8” size is perfect for general bench and lathe work. Made from steel, this set consists of an inside caliper, an outside caliper and a pencil compass/divider combination.

These self adhesive Mylar measuring tapes are great for jigs and fixtures or to replace an old worn factory tape on your shop equipment.

These Tapes measure in 16th increments with the graduation marks to the top and the inch marks to the bottom. Tapes are yellow with black print.

Right Reading Measuring Tape reads from the zero mark to the right as the measure increases.

 

These self adhesive Mylar measuring tapes are great for jigs and fixtures or to replace an old worn factory tape on your shop equipment.

These Tapes measure in 16th increments with the graduation marks to the top and the inch marks to the bottom. Tapes are yellow with black print.

Left Reading Measuring Tape reads from the zero mark to the left as the measure increases.

These very accurate, self-stick steel measuring tapes mount directly to your fence and feature high visibility yellow with black numerals and 32 nds graduations.

Left Reading Measuring Tape reads from the zero
mark to the left as the measure increases.

These very accurate, self-stick steel measuring tapes mount directly to your fence and feature high visibility yellow with black numerals and 32 nd's graduations.

Right Reading Measuring Tape reads from the zero mark to the right as the measure increases.

Fits Delta Unifence, Biesemeyer Commercial and Home Shop Systems, Biesemeyer Universal Miter Systems and other Fence Systems.

• Left 1/2" English, 64ths
• Permanent adhesive
• Precision metal tape with adhesive backing
• Sticks to almost any work surface.
• Convenient at-a-glance measurements.
• Trim to fit you're application

Left Reading Measuring Tape reads from the zero mark to the left as the measure increases.

Fits Delta Unifence, Biesemeyer Commercial and Home Shop Systems, Biesemeyer Universal Miter Systems and other Fence Systems.

• Right 1/2" English, 64ths
• Permanent adhesive
• Precision metal tape with adhesive backing
• Sticks to almost any work surface.
• Convenient at-a-glance measurements.
• Trim to fit you're application

Right Reading Measuring Tape reads from the zero mark to the right as the measure increases.

This 24” adjustable - t - square is constructed of solid aluminum. Built in notches to achieve a 90° angle. Etched on the blade are several common woodworking angles for easy alignment. (30°, 45°, 60°, 75°, and 90°. The measuring scale
numbers are large and easy to read 1/16” and 1/8” etched markings.

A multi purpose measuring tool perfect for any shop. These squares can be used as an outside or inside try-square, miter square, horizontal square, 45° and plumb level, depth and marking gauge, rule, straight edge and scriber! These squares will become on of the most used and dependable tools in your workshop

These high-precision aluminum squares are perfect for square layouts and machine set-ups. Each square features a heavy-duty beam and beveled scale with inside and outside graduations.

Just “pinch” your wood to read its thickness - from 1/16” to 2” in 1/32” increments. The expanded rear scale is easily read, and includes preset holes at 1/4” intervals for use as a go-no-go gauge, a handy feature for repetitive surface planing or checking turning diameters.

Accurately mark and measure any angle from 0° to 180°. Constructed completely out of stainless steel, and it features,
finely etched numbers and degree markings, as well as a 6” beam and lock knob.

The Digi Angle combines the best of two measuring tools, a set of steel rulers and a digital protractor. The rulers are made from 4R stainless steel with 4 sets of increments etched into them, ranging from 1/8" to 1/64". The protractors allow you to precisely set angles in 0.05 degree increments with a strong front locking lever to hold the arm position while transferring measurements. The protractor has a measuring range from 0-360 degrees and features a hold function, ensuring you will never lose your reading and a reverse reading capability for those hard-to-calculate angles. Works great to set miter gauges, bandsaws, drill presses, miter saws, as well as setting door frames and wall angles for cutting crown molding and trim.

This new style protractor can measure, mark and transfer any angle ...inside, outside, barred angle and slope angle ...under 90 degrees or over 90 degrees. It's ideal for fitting dollhouse siding to roof angles, setting table saw and disk sander angles, gauging model railroad slopes, measuring ship model mast rake angles, model airplane dihedral and hundreds of other uses. Made of high impact plastic with knurled brass locking nut. Longest blade is 6 inches long. Winner of Switzerland's Gold Award for new inventions. Instructions included.

Get precise angle readings with 180 degree reverse reading and large reversible LCD display for easy reading. Triple magnets in bottom and on both sides makes it simple to attach on any metal surface and tracing absolute bevel. Made with a strong alloy body with chrome finish and U.S.A. Navigational Sensors.

Quickly and accurately measure, mark or locate blade or bit heights and table or fence offsets. Easily lock and unlock scale with easy thumb lever. Metal scale measures in millimeters and inches.

• Wide stance and large feet stand over most tablesaw throats
• Rigid design for precise measurements
• Thumb lock lever easily locks and unlocks scale
• Metal scale measures in inches and millimeters
• Easy view window for accurate setting

The new Multi-Max is two depth gauge measuring systems, a chisel angle checker and drill point gage in one easy to use tool.

This aluminum Router Depth Gauge makes router set up fast, easy and simple. You simply set the Router Bit Depth Gauge across your cutter (router bit) and adjust the router bit to the required setting. The aluminum Router Depth Gauge is clearly marked in inches. The Router Depth Gauge is designed for setting cutter depths from 1/8” to 1” in 1/16” increments.

Never forget your calculations with ConverterPro cabinetmaker calculator. Easily convert between imperial, metric and fractions in seconds. The convenient erasable notepad allows to write down your notes and measurements, thus eliminating costly mistakes.

Features:

• Easily convert between imperial, metric and fractions in seconds
• Convenient erasable notepad
• Solar-powered - NO BATTERY REQUIRED!

Simple to use, easy to setup, a great tool for any workshop. The off-set gauge works by setting it to the desired measurement, and you're ready to go. For example, if you wanted your tablesaw blade height set exactly at 3/4", you would simply set the gauge at 3/4" high and slide it up to the blade (with saw turned off), raise the blade up to the gauge platform and you have your blade set.

Multi-purpose marking and measuring tool, perfect for a wide variety of household and jobsite applications. One Tool Does it all:

• Layout Mitered Corners
• Set 3/16" Reveals
• Transfer Measurements
• Align / Square Your Projects
• Set Bit / Blade Heights
• Layout Wall Studs
• Use as a Basic Rule
• Marking for Layout
• Use as a Simple Level
• 3-Way Adjustable Rule
• Imperial and Metric Scale
• Compact Design
• Layout Tool
• Trimming Tool
• T-Square
• Depth Gauge
• Torpedo Level
• Story Stick

New articulating pencil head increases flexibility and versatility of materials and objects that can be scribed. Allows you to adjust the AccuScribe PRO to accommodate difficult and awkward applications such as scribing around windows and doors. Ideal for transferring lines (for siding around windows), flooring, marking gauge applications, and scribing circles and radii.

The Trend Multiscribe is a multi-function profile matching tool that is used to transfer contours from one shape to another and mark on various materials. For use by all trades, carpenters, joiners and builders, the Multiscribe may be used as a compass, plumb bob, vertical or horizontal level. Steel blade is graduated with 1/4" and 5mm for profiling and features a built-in spirit level and pencil sharpener.