Login e-Direct Sign up Cataloge Request Shopping Cart Home Page Home Page Product Index About Us Customer Service Shipping Ordering Retail Store
 

 

SawStop Logo
Brake Cartridge

SawStop Brake Cartridge
Image Showing
Item #10502 Standard Blade Cartridge

 

Note:
Before ordering, check your cartridge to see if it's clear or blue tinted to insure that you get your correct cartridge for your saw.

SawStop Protection Starts Here!

The cartridges are compatible with all standard 10" blades and are also compatible with all woods and other non-conductive materials. The SawStop Brake Cartridge is available for standard saw blades as well as dado blades. Owners of the older SawStop saws with the 15 pin connector must contact SawStop for more information.

 

Newer Saws (Blue Tint Cartridge)

10502 - Standard Blade Cartridge:
Compatible with all standard 10" Blades.

10503 - Dado Blade Cartridge:
Compatible with all dado sets up to 13/16" thick.

 

Older Saws (Clear Cartridge)

10510 - Standard Blade Cartridge:
Compatible with all standard 10" Blades.

10511 - Dado Blade Cartridge:
Compatible with all dado sets up to 13/16" thick.

Item# Description Price Quantity
10502
Standard Blade Cartridge - TSBC-10R2
$69.00
10503
8" Dado Blade Cartridge - TSDC-8R2
$89.00
10510
Standard Blade Cartridge - TSBC-10L
$69.00
10511
8" Dado Blade Cartridge - TSDC-8L
$89.00

Product Divider Image

SawStop Logo
Overarm Dust Collection

SawStop Overarm Dust Collection

Dust Collection Up and Out of the way

Remove Dust Up and Out Of the way! This system is compatible with all SawStop saws and fits all SawStop T-Glide rail systemsh. Connects directly to SawStop’s dust collection blade guard system. Custom Y-Port unites above and below-table dust collection into 4" port.

  • Compatible with all SawStop saws.
  • Fits all SawStop rail and table lengths.
  • Connects directly to SawStop’s dust collection blade guard.
  • Custom Y-Port unites above and below-table dust collection into one 4″ port

    (For 1.75HP Professional Cabinet Saw: Requires Dust Collection Blade Guard)
    (For Contractor Saw: Requires Dust Collection Panel and Dust Collection Blade Guard. Not Compatible with 30” SFA Fence/Rail)


Note:
(Requires dust collection blade guard TSG-DC - PLU# 10496 shown below. Not compatible with Contractor Saw 30" rail kit CNS-SFA. )

Item# Description Price Quantity
10497
SawStop Overarm Dust Collection - TSA-ODC
$199.00

Product Divider Image

SawStop Logo
Dust Collector Blade Guard

SawStop Dust Collection Blade Guard

Collect abovetable dust. Independent lateral slides minimize blade exposure. Low profile to allow for cuts as narrow as 3/4 of an inch. Attaches directly to dust collection system. Compatible with SawStop Overarm Dust Collection.

  • Collect above-table dust
  • Independent lateral slides minimize blade exposure
  • Low profile to allow for cuts as narrow as 3/4 of an inch
  • Attaches directly to customer’s dust collection system
  • Compatible with SawStop Overarm Dust Collection
  • Included with every cabinet saw 3HP and above
Item# Description Price Quantity
10496
SawStop Dust Collection Blade Guard - TSG-DC
$138.99

Product Divider Image

SawStop Logo
Contractor Dust Control Panel

SawStop Contractor Dust Control Panel

Fits 2-1/2" and 4" Dust Collection Systems

A versatile dust collection system that fits 2.5” and 4” dust collection systems. Easy-to-use clamps make redirecting the internal tube a breeze. Specifically designed for the SawStop Contractor Saw.

  • 2.5” and 4” ports fit most dust collection systems
  • Easy-to-use clamps make redirecting the internal tube a breeze
  • Quick and easy to install
Item# Description Price Quantity
10488
SawStop Contractor Dust Control Panel - CNS-DCP
$49.00

Product Divider Image

SawStop Logo
Zero Clearance

Zero Clearance
#10504 Standard Insert Image

Standard Inserts for 10″ Blades Made of phenolic material that is covered on top and bottom with a low-friction, wear-resistant melamine surface.

  • Precision machined from a high-quality, ultra strong phenolic core
  • Positioning screws ensure a solid and precise fit in the table
  • Pre-formed clearance slots for SawStop blade guard and riving knife
  • Dual metal wear plates for anti-kickback pawls
  • Positive locking latch allows for tool-free operation

Dado Inserts for 8″ Dado Sets Made of phenolic material that is covered on top and bottom with a low-friction, wear-resistant melamine surface

  • Precision machined from a high-quality, ultra strong phenolic core
  • Positioning screws ensure a solid and precise fit in the table
  • Positive locking latch allows for tool-free operation
Zero Clearance



Zero Clearance




Item# Description Price Quantity
10504
Standard Zero Clearance Insert for 10" Blade - TSI-SLD
$39.00
10505
Dado Zero Clearance Insert 8" dado Sets - TSI-DLD
$39.00

Product Divider Image

SawStop Logo
Contractor Saw Mobile Base

SawStop Contractor Saw Mobile Base

Easily move your SawStop around your shop

Fully-welded 1/4" rigid steel construction with hard-wearing black powder coat finish. The wheels are constructed of Durable polyurethane and include two fixed-directional wheels and two 360° casters for easy positioning. Easy one-foot pedal operation. The base supports entire table and requires no extension piece even for the 52" extension table.

  • Fully-welded 1/4″ rigid steel construction
  • Hard-wearing black powder coat finish
  • Durable polyurethane wheels
  • Two fixed-direction wheels
  • Two 360° casters for easy positioning
  • Easy-to-follow assembly instructions
  • Easy one-foot operation
  • Supports entire table and requires no extension piece – even for the 52″ extension table
Item# Description Price Quantity
10483
SawStop Contractor Saw Mobile Base - MB-CNS-000
$160.00

Product Divider Image

SawStop Logo
Sliding Crosscut Table

Sliding Crosscut Table

The SawStop Sliding Crosscut Table is engineered for your SawStop Contractor Saw, Professional Cabinet Saw or the Industrial Cabinet Saw. The table is sized to fit, with pre-drilled mounting holes. TheT-6 aircraft-grade aluminum is beautifully anodized to complement your saw.
More important, the Sliding Crosscut Table is engineered to give you easy, repeatable, accurate results. Cut with Confidence.

  • Fits all existing SawStop saws & is beautifully finished to match
  • Full 48” rip/crosscut capacity, even with the fence installed
  • Can be mounted flush, preserving a 36” rip/crosscut capacity while maximizing walk around space in front of the saw
  • Precise, oversize gauge allows measurements up to 60 degrees, and a single knob twist frees the fence for angle adjustments
  • Extruded aluminum fence is beautifully anodized gray to complement the SawStop table, and elegant flip-stops offer easy measurement and control
 

47.25" deep
55" travel
48" crosscut capacity

 

 

 

 

Item# Description Price Quantity
10513
Sliding Crosscut Table - TSA-SA48
$1199.00

Product Divider Image

SawStop Logo
Cast Iron Wings

Cast Iron Wing

Make your saw even better and more stable.

  • Precision ground to .001”
  • Aligns perfectly with table, rails and extension table
  • Added wieght means added stability and reduced vibration
Item# Description Price Quantity
10485
SawStop Cast Iron Wing 1 each - CNS-07-017
$135.00
10484
SawStop Cast Iron Wing 2 each - CNS-CIWA
$270.00

Product Divider Image

SawStop Logo
30" Out-Feed Table

30" Out-Feed Table
  • 30″ of additional out-feed space
  • Makes one-person operation easier
  • Machined miter gauge slots
  • Smooth 3/4″ polyurethane coated MDF
  • All-steel hardware
  • Sturdy black powder-coated legs
  • Adjustable feet for a level work surface
  • Designed specifically for use with the T-Glide Professional Series Fence System

Outfeed table not compatible with mobile base

Item# Description Price Quantity
10486
30" Out-Feed Table - OFT30-CNS-000
$99.00

Product Divider Image

SawStop Logo
Jobsite Cart

Jobsite Cart

Click here for larger View

It's Like an All Terrain Vehicle for your saw.

  • Can be easily rolled up a ramp and over uneven surface
  • Sturdy steel construction with powder coating
  • Hefty 10” rubber tires and full ball bearing wheels
  • Not compatible with 52″ table
  • Cart is designed for use with the 30″ table, however, it will work with the 36″ table too.



Note:
Contractor Saw Not Included.

Item# Description Price Quantity
10512
SawStop Jobsite Cart - CNS-JSC
$199.00

Product Divider Image

SawStop Authorized Dealer Logo
SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.
Previous Page