Cut perfect miters consistently with the Precision Miter Gauge System. A number of unique features makes this the most accurate miter gauge on the market today. Factory calibrated accuracy starts with a gauge head that is machined on a computerized milling machine for absolute precision. An easy-to-read Vernier scale enables precise angle adjustments up to 1/10th of a degree. Five patented bar adjusters take up the play in the table slot for a perfect fit. A 24” Heavy Duty Trak section with patented flipstop and self-adhesive measuring tape is included.

The INCRA 1000SE, has all the great features of the popular INCRA Miter1000 plus more! The Special Edition adds a stainless steel Vernier cursor for an incredible 1/10th degree resolution between fixed steps. The Special Edition also includes a miter fence that telescopes from 18" to a full 30" in length with the new INCRA Flip Shop Stop for patented Automatic Positioning Control. The saw tooth rack system instantly controls the length of your cut with INCRAs legendary machine shop accuracy as the dual Flip arms provide flexibility. The Flip Shop Stop is equipped with three sliding stop rods that operate independently or in tandem for one, two, or three simultaneous stop positioner setups.

The INCRA Miter 1000HD is the most refined model yet in the Miter 1000 series. The HD stands for High Definition, because the protractor plate's exclusive Angle LOCK Indexing System has a whopping 180 can't-miss angle stops in 1-Degree increments with special stops located at 22-1/2-Degree. Combine that high-resolution protractor with the industry's smoothest adjustable miter bar, a telescoping Incra LOCK Cut-off Fence and Flip Shop Stop and a steel vernier scale that reads to 1/10-Degree and you've got a winner that will improve the quality of any project. Are you cutting parts for segmented turning? The Miter 1000HD will allow you to precisely set and quickly duplicate any angle you might need, whether it's 18-Degree for cutting 10 sides, 25.7-Degree for 7-sided objects or anything else imaginable.

The INCRA Miter V27 is engineered to provide a high performance, yet low cost upgrade for your Table Saw, Band Saw, Router Table, Disk Sander, Belt Sander or any other tool in need of a better miter gauge. Like all INCRA Miter Gauges, the V27 delivers extreme miter cutting accuracy through the advanced combination of INCRA's exclusive AngleLOCK indexing system and its patented Adjustable GlideLOCKMiter Bar.

The Miter V120 from INCRA has the precision of a higher price-point miter gauge while offering a price that makes it an affordable upgrade to your stock miter gauge. 120 AngleLOCK Indexing Stops. 1 Degree Stop Spacing with Special Stops at +/- 22-1/2 degrees. Patented GlideLOCK Miter Bar Expansion Disks Provide a perfect fit. Removable retaining clip for T-Slot miter channels. All steel machined and laser cut components.

For extra-large crosscuts, the non-drag support provided by the sliding panel — along with the extra holding power of the included hold-down clamps — adds stability and control.

• Incra hold-down clamp keeps your fingers away from the blade when cutting small workpieces.
• Includes outboard fence support that locks behind your fence in T- slot to provide even more rigidity for all operations.
• Instantly removable from your table saw when making rip cuts or other operations that don't require a sled.
• Safely handles large and extra small workpieces.
• Excellent crosscut and mitering control.
• Comes with hold-down clamp and aluminum miter bar.
• With quick-release feature.
• Works with any miter gauge in your shop!

This clamping miter gauge is safer than your standard miter gauge since it keeps your hands away from the blade. It has a comfortable grip, built in sliding stop, and a positive trigger clamping action. It fits all 3/4” x 3/8” standard miter slots and has positive angle stops at 90° and 45° both left and right.

This Delta Miter Gauge is accurately constructed with adjustable positive stops at 90, 15, 22-1/2, 30, 45, and 60 degrees left and right. The 18-1/4” guide bar offers adjustment screws to custom fit the miter slot of your machine. A large hand knob provides positive control of the miter gauge.

Fulton's new Miter Gauge has all the features a woodworker needs for making mitered cuts on the tablesaw. A pin stop adjustment knob allows for easy adjustments to the most common angles used by simply pulling the spring loaded knob up and sliding the miter head into the correct pre-set hole. The holes are conveniently positioned at 0°, 22.5°, 30°, 45°, 60°, 67.5°, and 90°. The steel miter bar has adjustable spring loaded plungers to make fitting any standard 3/4" x 3/8" miter slot, slop free. The miter gauge also has an easy to read scale which is on a low profile head assembly for easy viewing of your workpiece while cutting.

Attach the cam miter hold down directly to your miter gauge by simply threading it into the top center hole. Once secure, place the stock you want to crosscut on your table saw and slide it squarely up against your miter gauge. Adjust the rubber foot height so that it fit's snuggly against the stock. Clamp the stock down by pushing the cam lever downward until you have the desired pressure to hold your stock, and proceed to making your cut. The cam miter hold down works on miter gauges with 1/2" - 20 thread holes.

The 22'' Miter-T-Fence will improve work support close to the blade and will work on the left side or right side of your saw.The adjustable extruded aluminum fence increases the face of your miter gauge or miter saw and has a built in extension bar to increase the stop capacity to 36''. This fence can also be put onto your Miter saw for perfect repetitive cuts and a better extension. The fence can be easily taken on and off either tool to switch back and forth between tools. The 48'' fence is designed for your miter saw with a built in extension capacity of 86''. This fence can be used in conjunction with the 22'' fence to give your miter saw a fence for both sides for the ultimate fence system your shop will ever know.

Both fences include a stop block for the repetitive cuts and appropriate knobs and bolts for easy mounting on and off your various tools.