Call Toll Free 1-888-512-9069
Shopping Cart

Kreg
Kreg® Custom Pocket-Hole Plug Cutter

Kreg® Custom Pocket-Hole Plug Cutter
Kreg® Custom Pocket-Hole Plug Cutter Kreg® Custom Pocket-Hole Plug Cutter Kreg® Custom Pocket-Hole Plug Cutter Kreg® Custom Pocket-Hole Plug Cutter
Kreg® Custom Pocket-Hole Plug Cutter Kreg® Custom Pocket-Hole Plug Cutter Kreg® Custom Pocket-Hole Plug Cutter Kreg® Custom Pocket-Hole Plug Cutter

reg® Custom Pocket-Hole Plug Cutter

The Kreg® Custom Pocket-Hole Plug Cutter has a never-before-available way to take their Kreg Joinery projects to the next level. The Custom Pocket-Hole Plug Cutter provides complete freedom to create custom plugs from any wood species, and to make them from left over project wood, which ensures the best-possible color match possible, and it creates face-grain build with Kreg Joinery™.

Features:

  • Hardened drill guides provide reliable drilling, features a manufactures lifetime warranty
  • Special fluting reduces heat and friction for better plugs and longer bit life
  • Fits into any any Kreg Jig® K3, K4, or K5
  • Works with standard Plug Cutting Bit (included) and with HD and Micro-Pocket™ Plug Cutting Bits
  • Cutting tip shears cleanly for a smooth, consistent plug
  • Made from impact resistant glass reinforced nylon

Includes:

  • 1 ea. Custom Pocket-Hole Plug Cutter
  • 1 ea. Custom Plug Cutting Bit
             for standard-size pocket holes
  • 1 ea. Bit Stop Collar and Hex Key Wrench
  • 1 ea. Owner's Manual with complete Instructions
Item# Description Price Quantity
4862 The Kreg® Custom Pocket-Hole Plug Cutter - KPCS $69.99

Kreg
Custom Plug Cutting Bit - Micro

Custom Plug Cutting Bit - Micro

The Custom Plug Cutting Bit works with the Custom Pocket-Hole Plug Cutter to create plugs that perfectly match your project. This specially designed bit chucks into any drill, and fits into the hardened-steel drill guide in the Plug Cutter to produce plugs in the correct diameter to fit Micro-Pocket™ Kreg Jig® pocket holes.

Features:

  • Positive stop collar ensures perfect drilling depth to produce accurately sized plugs
  • 3/8" Shank
  • Creates plugs that fit Micro-Pocket™ Kreg Jig® pocket holes
  • Open design and enlarged inside diameter provide clearance around plug foe easier drilling
  • Special fluting reduces heat and friction for better plugs and longer life
  • Multi-tooth cutting tip shears cleanly for a smooth, consistent plug
  • Gap at the end of special fluting as a gap that provides efficient chip clearance
Item# Description Price Quantity
4864 Custom Plug Cutting Bit - Micro KPC1040 $39.99

Kreg
The Custom Plug Cutting Bit - HD

The Custom Plug Cutting Bit - HD

The Custom Plug Cutting Bit works with the Custom Pocket-Hole Plug Cutter to create plugs that perfectly match your project. This specially designed bit chucks into any drill, and fits into the hardened-steel drill guide in the Plug Cutter to produce plugs in the correct diameter to fit Kreg Jig® HD (Heavy Duty) pocket holes.

Features:

  • Positive stop collar ensures perfect drilling depth to produce accurately sized plugs
  • 3/8" shank
  • Creates plugs that fit Kreg Jig® HD pocket holes
  • Open design and enlarged inside diameter provide clearance around plug for easier drilling
  • Special fluting reduces heat and friction for better plugs and longer life
  • Multi-tooth cutting tip shears cleanly for a smooth, consistent plug
  • Gap at the end of special fluting as a gap that provides efficient chip clearance
Item# Description Price Quantity
4865 Custom Plug Cutting Bit - HD KPC1060 $39.99

Kreg
Mobile Project Center

Kreg® Mobile Project Center
Kreg® Mobile Project Center Kreg® Mobile Project Center Kreg® Mobile Project Center Kreg® Mobile Project Center
Kreg® Mobile Project Center Kreg® Mobile Project Center Kreg® Mobile Project Center Kreg® Mobile Project Center
Kreg® Mobile Project Center Kreg® Mobile Project Center Kreg® Mobile Project Center Kreg® Mobile Project Center

 

reg® Custom Pocket-Hole Plug Cutter

The Kreg® Mobile Project Center is a versatile, portable and easy-to store work center that combines a sawhorse, workbench, assembly table, and clamping station all-in one. With the Mobile Project Center you can make any place a workspace and and can have a portable solution with capabilities that exceed a run-of-the-mill workbench. Whether your brand new DIYer or a seasoned woodworker who loves Kreg Joinery™, or a job-site professional, the Mobile Project Center will give them the ability to work wherever, whenever, however you choose. Plus, an added advantage with the included Bench Clamp with automaxx® Technology, and a set of Bench Dogs, that make the Mobile Project Center even more versatile.

Key Features:

  • Multiple work modes provide maximum versatility
  • Large 27-1/2" x 31-1/2" (70cm x 80cm) work Surface
  • Durable polypropylene tables withstand rugged use
  • Locking table supports with easy-release tabs
  • 350 lb. (158g) Load Capacity
  • Comfortable 31-1/2" (80cm) Table Height
  • 17-1/2" x 26" (45cm x 66cm) storage shelf
  • Large, non-slip feet fro stable footing
  • Folds to just 6-1/2" (16.5cm) thick
  • Weighs 40 lbs (18kg)
  • Auto-adjust Bench Clamp and 4 Bench Dogs included
  • Perfect for use with Kreg Joinery™
  • Expandable by pairing with a 2nd Mobile project Center
  • Built-in Storage tray for hardware & parts

Package Includes:

  • 1 ea. Mobile Project Center
  • 1 ea. Bench Clamp with Automaxx® Technology
  • 4 ea. Kreg® Bench Dogs
  • 2 ea. support Brackets
  • 2 ea. Trak Bushings
  • 2 ea. Connection Keys
  • 1 ea. Owners Manual
Item# Description Price Quantity
*4866 Kreg® Mobile Project Center $183.99

* Price includes oversize shipping cost


Kreg
Concealed Hinge Jig

Concealed Hinge Jig
Concealed Hinge Jig Concealed Hinge Jig Concealed Hinge Jig Kreg Concealed Hinge Jig

Make cabinet door installation easy! Get drill press accuracy with any hand drill.

  • Accurate hinge positioning with built-in indexing tabs
  • Repeatable results with built-in measuring scales
  • Reliable drilling with bit guide and stop collar
  • Simple to use with any drill—no special tools needed
  • Adjustable cams ensure proper hinge offset
  • Durable carbide-tipped drill bit included
  • Strong, lightweight materials for easy handling

 

The Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, the Concealed Hinge Jig works with an ordinary drill and the included carbide tipped bit.

The Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges (sometimes called “Euro hinges”) using just a drill. The jig positions an included carbide-tipped bit exactly at the proper position and offset, and drills to the perfect depth every time thanks to depth stop collar. The jig is simple to use, and it ensures that you can mount cabinet doors that fit great and work properly.

Concealed hinges are great for mounting cabinet doors because they stay out of sight, they’re adjustable, and they work very well. Mounting them, though, requires drilling a large hole at a very specific position and depth. The Kreg Concealed Hinge Jig takes the guesswork out of drilling those holes, and allows you to do it with nothing more than a drill and the carbide-tipped bit that comes with the jig.

Note: A 1/16" bit is required to drill for hinge-mounting screws. Not included.

The Concealed Hinge Jig consists of a glass-filled nylon base with a hole that receives a drill guide. Indexing cams ensure that the jig positions the bit to drill a hole at the required offset—which is dictated by each hinge—and a built-in stop collar ensures that the cup depth is correct every time. There are even holes that you can use to guide a bit for hinge screw holes. The Concealed Hinge Jig comes with a high-quality, carbide tipped bit to ensure great results.

The Concealed Hinge Jig is designed to be intuitive for beginners to use, but robust enough for professionals. Just pick out your hinges, look up a few basic mounting instructions that come with them, and then set up the Concealed Hinge Jig by adjusting a pair of built-in cams. After that, you’re set to drill hinge cup holes using any ordinary drill. Whether you’re installing one cabinet door or making doors for an entire kitchen, the Concealed Hinge Jig provides reliable, consistent results.

Item# Description Price Quantity
4860 Concealed Hinge Jig - KHI-HINGE $29.99
4861 35mm Concealed Hinge Bit - (Replacement Bit) $16.99

Kreg
Cabinet Hardware Kit

Cabinet Hardware Kit
Cabinet Hardware Kit Cabinet Hardware Kit Cabinet Hardware Kit Kreg Concealed Hinge Jig

Install Knobs and Pulls the Worry-Free Way – with Easy, Repeatable Accuracy

  • Adjustable guides for accurate hole placement
  • Built-in measuring scales for repeatable results
  • Versatile for mounting single and multi-hole knobs
  • Adjustable edge guide for easy positioning
  • Strong, lightweight materials for easy handling
  • Durable hardened-steel drill guides

 

The Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls. The movable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time. Perfect for new construction and for refreshing entire rooms.

The Cabinet Hardware Jig provides a simple solution for the intimidating task of drilling mounting holes for cabinet knobs and pulls. Whether you’re installing one new knob or dozens of drawer pulls, the Jig ensures that you’ll drill accurately and consistently every time, so you get results that exceed your expectations.

Whether you’re updating your cabinets or you’re building a project from scratch, adding hardware like knobs and pulls is often one of the final steps—and one of the most intimidating. Drill the holes incorrectly, and it can be very difficult to correct the mistake. The Cabinet Hardware Jig takes all the guesswork out of the process by allowing you to drill straight, accurately positioned holes every time, so you’ll know that every piece of hardware is positioned correctly and consistently.

The Cabinet Hardware Jig features moveable, hardened-steel drill guides that lock in place to align with common hole-spacing measurements for cabinet knobs and pulls. This allows you to confidently drill straight, accurately positioned holes. A moveable edge guide and built-in measuring scales (in imperial and metric) ensure that those holes will be positioned where you want it every time, which means you can drill as many holes as you need without the uncertainty and potential mistakes that can come with measuring and marking every one.

The Cabinet Hardware Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need is a drill and a 3/16", bit, and the ability to set the jig to match your hardware and the position where you want it to go. Durable polymer construction makes the jig tough but light, and hardened-steel drill guides ensure that you’ll get straight, accurate holes— whether you’re drilling one, a few, or hundreds.

NOTE: 3/16" (5mm) drill bit required - does not come included.

Item# Description Price Quantity
4859 Kreg® Cabinet Hardware Kit - KHI-PULL $24.99

Kreg
Drawer Slide Jig

Drawer Slide Jig
Drawer Slide Jig Drawer Slide Jig Drawer Slide Jig Kreg Concealed Hinge Jig


Install Drawer Slides the Fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly

  • Accurate slide positioning with built-in indexing tabs
  • Repeatable results without measuring and marking
  • Versatile for use in cabinets, cases, and more
  • Reversible to mount slides to cabinet and drawer box
  • Secure for holding slides in place as you work
  • Strong, lightweight materials for easy handling

 

The Drawer Slide Jig takes the guesswork out of installing drawer slides. This easy-to use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer. Plus, the Jig works with ball-bearing, epoxy-coated, and undermount slides for perfect positioning every time.

The Drawer Slide Jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. Built-in tabs make the jig easy to align to support the slide inside the cabinet, and to support the drawers as you attach the slides to them. The jig is simple to use, and it ensures that every drawer fits right and operates smoothly.

Whether you’re updating cabinets or you’re building a project from scratch, mounting drawers is always a challenge. The slides have to be level, straight, and positioned properly, or the drawers won’t operate well. The Drawer Slide Jig takes the guesswork out of the process by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment.

The jig supports the drawer slide level and straight while you install it in the cabinet. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box. With this jig, you’ll know that your slides are positioned correctly, so your drawers will operate smoothly.

The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet—one on each cabinet side—and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. The brackets are also reversible to protrude from the cabinet, and then clamp in place perfectly aligned to support the drawer as you mount the slides to the drawer box, too.

The Drawer Slide Jig works with almost all types of drawer slides, including ball-bearing, epoxy-coated, and undermount slides. The Drawer Slide Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need are the slides you’ll use, a clamp, and the Drawer Slide Jig, and you’re set to install drawer slides just like the pros. Whether you’re installing one drawer or dozens, the Drawer Slide Jig provides fast, consistent results.

Item# Description Price Quantity
4858 Kreg® Drawer Slide Jig - KHI-SLIDE $24.99

Kreg
Wood Project Clamp

3" Wood Project Clamp
3" Wood Project Clamp
6" Wood Project Clamp
6" Wood Project Clamp


reg® Custom Pocket-Hole Plug Cutter

Wood Project Clamps are perfect for Kreg Joinery, project assembly, general clamping, and more. Available in two sizes — 6" reach and 3" reach — these versatile clamps have large clamp faces that distribute clamping force evenly and won't mar delicate surfaces. They are compatible with the Kreg Jig® R3's Clamp Pad Adapter, and with the Kreg Jig® Portable Base.

Auto-Adjust Technology Thanks to Automaxx® Auto-Adjust Technology, Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2x4 and then a piece of 1/2" plywood without ever readjusting the clamp.

Easy-to-Regulate Clamping Pressure Easily regulate clamping pressure with a simple thumbscrew. Just set your desired pressure by turning the thumbscrew for more or less pressure. Once the pressure is set, the clamp maintains consistent clamping pressure with every thickness.

Highly-Durable Construction Wood Project Clamps are designed to withstand years of heavy use, thanks to heavy-duty, all-metal construction. They also have ergonomic padded grips for comfort and ease-of-use.

Quick, Convenient Clamping with Automatic Adjustment

  • Comes in two sizes:
    • 3" reach; clamps materials up to 3" thick
    • 6" reach; clamps materials up to 5" thick
  • Adjusts automatically to match material thickness
  • Easy-to-regulate pressure with a simple thumbscrew
  • Large clamp faces spread pressure evenly
  • Ergonomic padded grips prevent hand fatigue
  • Works with the Kreg Jig® R3 Clamp Pad Adapter, as well as the Portable Base
Item# Description Price Quantity
4852 3" Wood Project Clamp - KHC3 $29.99
4853 6" Wood Project Clamp - KHC6 $37.99

Kreg
Right Angle Clamp

Kreg Right Angle Clamp
Kreg Right Angle Clamp Kreg Right Angle Clamp

 

reg® Custom Pocket-Hole Plug Cutter

The Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together. The swiveling clamp pad opposite the pin grabs the mating piece securely.

Thanks to Automaxx® Auto-Adjust Technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles. This handy clamp works with all kinds of materials, from thin 1/2" plywood to thick 2x4 boards.

Clamp Using the Pocket Hole The steel pin on this clamp is shaped to fit snugly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw into an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you.

Swivel Pad for Solid Clamping The arm opposite the pin features a pad that swivels to fit tight against your material, so you can count on solid clamping without a chance of the joint shifting.

Ultra-Wide Reach Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done.

Use One Clamp, or Use Two Many woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining pocket holes.

The secret weapon for pocket-hole construction—now with Automaxx® Technology

  • 3-1/2" reach (89mm); clamps
  • materials up to 31/8" thick (79mm)
  • Auto adjusts to match material thickness
  • Steel pin fits snugly into pocket hole
  • Swiveling pad secures mating piece
  • Adjustment knob provides easy-to-regulate clamping pressure
  • Ergonomic padded grips prevent hand fatigue
Item# Description Price Quantity
4854 Kreg® Right Angle Clamp $34.99

Kreg
Precision Router Table Insert Plate

Solid, Flat, and Perfectly Level Mounting Surface
This rugged 3/8" thick (9mm) phenolic insert plate is designed to provide a solid, flat, and perfectly level mounting surface for your router. Measuring 9-1/4" x 11-3/4" (235mm x 298mm), it will accept almost any router (even large, heavy models) with ease.

No Predrilled Mounting Holes
This plate comes without any predrilled mounting holes. Alignment marks engraved on the underside make it easy to center and mount any router using the detailed instructions that are included with the plate.

Level-Loc Reducing Rings
The plate is equipped with our Level-Loc Reducing Rings that allow you to easily change the size of the opening around the router bit. These rings simply twist into place using an included ring wrench to lock in level and flush with the plate surface. The plate comes with three Level-Loc Rings: 1" (25mm), 13/16" (30mm) for use with universal-style guide bushings, and 25/8" (67mm).

Undrilled and Predrilled Plates
The Precision Router Table Insert Plate is available in three versions, so you can choose the one that best suits your needs.

  • Undrilled: This plate comes without any predrilled mounting holes. Alignment marks engraved on the underside make it easy to center and mount any router using the detailed instructions that are included with the plate.
  • Predrilled for Triton: This plate comes with predrilled holes and mounting hardware to fit Triton M0F001 and TRA001 Routers. With modification, the hole pattern also works with the Porter-Cable 7500 Series.
  • Predrilled for Porter-Cable and Bosch: This plate comes with predrilled holes and mounting hardware to fit the Porter-Cable 690 and 890 Series, along with the Bosch 1617.
Item# Description Price Quantity
4857 Kreg® Precision Router Plate - Undrilled $69.99
4855 Kreg® Precision Router Plate - Pre-Drilled / Triton $69.99
4856 Kreg® Precision Router Plate - Pre-Drilled / Porter Cable $69.99

Kreg
System Organizer

Kreg System Organizer
Kreg System Organizer Kreg System Organizer Kreg System Organizer Kreg System Organizer
Kreg System Organizer Kreg System Organizer Kreg System Organizer Kreg System Organizer
Kreg System Organizer Kreg System Organizer Kreg System Organizer Kreg System Organizer

Note:
Organizer Only, Tools not included.

Kreg® Proudly introduces the System Organizer, the way to store and organize an entire Kreg Joinery™ system in one compact, convenient case.

The all-new System Organizer is the perfect place to store and organize all of your Kreg Joinery™ system parts - your Kreg Jig®, Kreg® Clamps, Kreg® Screws, drill and driver bits, and more. A portion of the Organizer’s tray can be removed for storage of other items such as the Kreg® Shelf Pin Jig, compact drills and drivers, and more.

The System Organizer has a custom-fitted insert to hold the following items:

  • 1 Kreg Jig® (K5, K4, or K3 model)
  • Kreg Jig® K5 Storage Wings
  • 4 Standard Stepped Drill Bits
  • 7 Standard 6" or 3" Square-Drive Bits
  • 3 Stop-Collar Hex Wrenches
  • Micro-Pocket™ Drill Guide Block
  • 2 Micro-Pocket™ Drill Bits
  • Kreg Jig® HD (Heavy-Duty)
  • Kreg Jig® HD Drill Bit
  • Kreg Jig® HD Square-Drive Bit
  • Kreg® Clamps
  • Up to 6 Kreg® Screw 100-count Containers

In addition, a portion of the Organizer’s tray can be removed for storage of other items such as:

  • Up to 6 Kreg® Screw 500-count Containers
  • Additional Clamps
  • Kreg® Shelf-Pin Jig
  • Compact Drills and Drivers

It’s easy to keep track of everything stored in the System Organizer, too, thanks to a transparent lid. A pair of heavy-duty clasps ensure that lid stays shut, and a large handle makes the Organizer easy to carry.

Specifications:

  • Material is Durable, impact-resistant polymer
  • Dimensions: 18" wide x 15-1/4" tall x 6-5/8" deep 457mm x 387mm x 168mm
  • Weight: 4.95 Pounds
Item# Description Price Quantity
1425 Kreg® System Organizer $39.99