Easily locate and drill pen blank centers with the Pen Centering vise. Unique support and threaded design allow for accurate drilling. Set the jig up once and all your pen blanks will be centered. There is no need to change the setup again. Holds and centers pen blanks up to 1-1/2" square.

Pen assembly just became a whole lot easier with the Milescraft Turners Pen Press. This is the best press for assembling turned pens and the mechanical components. The Milescraft Turner’s Press features an exclusive Flip Up support stanchion that ensures horizontal assembly of components up to 5.75" in length. The Flip Up Support also eliminates object movement when pressure is applied and prevents splitting of delicate and small pen parts and it's components. The unit also features fast tool-free adjustments. A spring loaded self feeding mandrel holds your objects in position during set up. The micro adjustable pressure pad allows for finely tuned length adjustments. The solid steel handle and cam assembly can apply up to 300 lbs. of pressing force. This just may be the best pen press you will ever own.

The ideal tool for pressing pen crafting / assembly components together in a quick and simple fashion. The pen press exerts up to 300 Lbs. of pressure to ensure solid fitting pen pieces and it can be easily adjusted for different size components. The unit is made from steel for repeated everyday use and accepts most every size pen blank or component.

Able to hold two barrels at a time, this Pen Mandrel is an affordable pen mandrel that’s precision machined for accuracy and will run true. The compression fitting acts as an adjustable “stop” adding versatility by allowing you to mount single or odd size barrels. This mandrel is not guaranteed to accept bushings from other brands of pen mandrels. Includes compression fitting, brass tightening nut. Bushings not included.

This system is designed to save the center point and the mandrel
shaft from damage caused by over tightening the tailstock
center. Remove the tailstock live center assembly from the tailstock
housing of your lathe. Install this mandrel saver in its place.
Mount your bushings and blanks on your mandrel as you normally
would to turn your blanks.

Keeps the glue on your pen tubes not your fingers! Slip any pen tube from 7mm to 11mm in diameter onto the tapered chrome plated shaft to insert the tube into a blank while keeping your hands glue free

Here’s a complete barrel trimming system. An essential step for making a quality pen project is to square the end of your pen blanks and pen tubes prior to final pen kit assembly. Our system includes cutting shafts that will fit into a drill chuck or lathe chuck – the shaft will clean the glue from the tubes and act as a pilot for the 3/4" squaring cutter. This complete system includes:

• 7mm, 8mm, 3/8", and 10mm pilot shafts
• 3/4" squaring cutter , allen wrench and instructions
• Sleeve adapter for #PKPARK-PCL and #PKMONT-PCL pencil kits

Brad point drill bits are the best choice for drilling wood and these metric drill bits are perfect for drilling pen blanks. High Speed Steel for accuracy and sharpness, and feature extra long center point. The center point isactually a continuation of the flutes and bores rather than being pushed through the work piece.

Brad point drill bits are the best choice for drilling wood and these fractional drill bits are perfect for drilling pen blanks. High Speed Steel for accuracy and sharpness, and feature extra long center point. The center point is actually a continuation of the flutes and bores rather than being pushed through the work piece.

The Pen Maker's Bradpoint Drill Bit Set contains all the drill bits needed to make the most popular pen kits.

Set includes

• 7mm HSS Brad Point Drill Bit
• 10mm HSS Brad Point Drill Bit
• 11mm HSS Brad Point Drill Bit
• 27/64" HSS Brad Point Drill Bit
• 3/8" HSS Brad Point Drill Bit
• Letter "O" HSS Brad Point Drill Bit

Abrasive Rolls (5 pk) Conveniently finish your pens in five graduated sanding steps with this handy dispenser. An essential process for finishing your pens properly. Dispenser includes 5 rolls of hard to find J-weight cloth backed sandpaper, 1" wide x 20' rolls.

Assortment includes: 150x, 240x, 320x, 400x, & 600x.

Use Ultra Shine as the last sanding step before applying your final finish (eg. Shellawax, Hut wax, etc.). You’ll be amazed at the brilliant shine and superb blemish-free surface on your turning. Ultra Shine contains ultra fine abrasives (Tripoli powder) that will enhance a 240 grit sanding step to 1200 grit or more and enhances a 400 grit finish to 2000 grit! The higher grit abrasive you use before using Ultra Shine, the better your finish will be with no sanding marks. Eliminates sanding marks. Works wonders on both woods and plastics. 250ml (8.6 fl oz)

Applies smoothly and consistently on your work and provides a flawless non streaking finish on large and small turnings. Its creamy consistency makes it easy and safe to apply. Buffs to a rich deep durable shine on wood carvings or flat wood. Shellawax is a "friction polish" that dries almost instantly while applying on the lathe - produces a wonderfully brilliant shine in seconds. Non-toxic and water resistant when dry. Formulated from an exclusive combination of de waxed white shellac and a variety of fine finishing waxes.

Please note that this item can only be shipped to addresses within the continental United States by UPS Ground only.

One of the easiest to use, best value chucks on the market 
The Barracuda2 is an easy to use, high-performance, full accessorized key operated self centering four-jaw lathe chuck system. You only need one hand to use this lathe chuck as the "T" handle jaw tightening key enables you to to tighten the jaws with only one hand while your other hand is free to support your work.

Key Benefits:

• Easy to use with one hand operation: The "T" handle key system makes it much easier to use than the lever, non-key chuck systems. 
• Will give you more turning confidence: Because you only need one hand to tighten the jaws, you can feel more confident and comfortable supporting your work with your free hand. 
• Powerful grip: to hold your work piece securely.
• Smooth operation & balance: The Barracuda2 system is precision engineered and machined to provide you smooth operation and minimize vibration at almost any lathe speed.
• Compatible for most woodturning projects: The variety of included jaw sizes and accessories means the Barracuda2 lathe chuck will mount most turning projects onto your lathe; including bowls, spindles, small turning projects and more.
• Works with any Mini Lathe, Midi Lathe or Full Sized Lathe.
• Changing jaws is quick and easy
• Stout storage case for easy handling and organization: The blow molded plastic case will easily store, organize and secure the complete Barracuda2 Lathe Chuck System.
• Virtually dust free use: the wood chips and dust clear out of the chuck drive gear with ease.