True clamping flexibility.  With the Klamp Trak™ you can turn the entire length of your workbench into a clamping station.  The Klamp Trak™ can be quickly routed into any wooden or composite work surface such as a workbench or sawhorse, or staggered between two ¾” thick panels to provide a perfectly seamless clamping plane anywhere you need it.  Once installed, it accepts any Kreg Bench Klamp™, giving you complete precise control over where you position your clamp.  When not in use, you can remove the Bench Klamp™ to regain your perfectly flush work surface. Includes one 33-3/4" aluminum extrusion.

See Klamp Track™ Instructions

When used with the Klamp Trak™, these simple blocks allow you to quickly and accurately register your stock to the edge of your work space and bring your entire project into alignment.  Quick and easy squaring.  Especially useful for face-frame construction.  Made from durable, impact resistant plastic.

Take your work on the road.  This Bench Klamp™ comes complete with a large 10” by 10” ¼” zinc coated steel plate which makes working on the road or at the jobsite quick and easy.  Unlike the smaller Klamp Plate™, the steel plate in this kit can move from spot to spot.  Whether you’re working off of your pickup tailgate, or on the jobsite floor trimming out a fireplace, you’ll get the same versatile and powerful clamping solution as you’d get back in your shop.

Includes a 10”x10”x1/4” zinc coated steel plate, Bench Klamp™, mounting hardware, and rubber feet.

See Kreg Heavy Duty Bench Klamp System Product Manual

3” reach, works with stock up to 4” thick. This unique clamp glides along the Klamp Trak™ or secures to the Klamp Plate™, providing an amazingly strong 360 degree clamping station, wherever you need it most. Simply remove the Bench Klamp™ to regain your perfectly flush work surface. If you’re like most woodworkers, finding the perfect clamp for the job is never easy. Most of the time, it seems like the clamp you need won’t let you work where you want to… Your C-clamp only works at the edge of your workbench, your bench dogs only work where you’ve got pre-drilled holes, etc. Utilizing a simple technology called Inter-Lok™, Klamp System™ components let you add a clamping station just about anywhere – even at the very center of your workbench – without having to lose your perfectly flat work surface. You can add a clamping station to your sawhorse set with a few Klamp Plates™ or down the entire length of your workbench with Klamp Trak™. Each individual Klamp System™ Component was designed to meet your unique clamping needs. Where do you need a clamping station?

See Kreg Bench Klamp Instruction Sheet

Imagine the possibilities.  With the Klamp Plate™ you’re able to create an incredibly strong and versatile clamping station virtually anywhere you can imagine one.  The Klamp Plate™ can be quickly routed into any wooden or composite work surface such as a workbench, saw horse, table saw extension, etc.  Once installed, it accepts any Kreg Bench Klamp™, giving you hundreds of pounds of clamping pressure at a moments notice.  When not in use, you can remove the Bench Klamp™ to regain your perfectly flush work surface.

Add a clamping station almost anywhere.  Includes plate, and mounting hardware.

See Kreg Heavy Duty Bench Klamp System Product Manual

Take the Guess Work Out of Mounting Drawer Slides!

Magnetic Drawer Slide Mounting Tool Installs most types of metallic slides including bottom-mount, full-extension and center-mount.Whether you're building production cabinets or just a single set for your home or shop, this drawer slide mounting tool will greatly simplify the process of positioning your slides accurately to assure smooth gliding drawer movement.

This tool uses the intersection of the cabinet stile and rail in face frame cabinets, and the cabinet side in frameless cabinets as a reference point from which to position a slide perfectly parallel to the drawer opening. Simply place a metallic drawer slide into position on the base of the tool, (magnets hold the slide in place) align the tool where the stile and rail meet as shown at left, and drive the screws. Perfect alignment every time! Patent Pending.

These unique brackets serve as an extra set of hands while attaching drawer boxes to ful-extension drawer slides. These Drawer Mounting Brackets are quick and easy to use and help to insure accurate alignment for a smooth gliding drawer action every time.

3 Simple Steps to Smooth Gliding Drawers!

The Kreg Right Angle Clamp helps to align workpieces in 90 degree registration. The clamp is designed with a 3/8" steel pin on one arm that fits down into the pocket hole and anchors the workpiece firmly against the second workpiece to be joined. The opposite arm is fitted with a 180 swiveling pad that automatically adjusts to your material dimensions. Finish the joint by driving a screw into the adjacent pocket hole. Also great for assembling all types of box joints.

Ensure Perfectly Flush Joint Lines!

The Kreg line of Face Clamps helps to ensure a perfectly flush joint every time. Without clamping, the joint can misalign if the screw follows the grain of the wood. To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpiece(opposite the pocket holes), clamp with moderate pressure and drive a screw.

90 Degree corner clamp - Drawers, shelving, and tjoints
made easy! Self-squaring design makes it easy to
square and secure individual joints, every time! Quickadjust
handle lets you make fast and easy adjustments
for varying stock thicknesses up to 1-1/4”. Innovative
swivel head and quick release lever improve ease-ofuse
and efficiency. Large Clamping Surface protects
soft woods against work piece imprint. Durable Heat
Treated Steel construction features nickel plating for
additional longevity.

Without a face frame clamp the joint can mis-align when the screw follows the grain of the stock. By clamping the large plates to your joint with medium pressure, you will be able to hold your stock exactly where you need it in order to drive your screws with virtually no hassle.

This one simple kit provides everything you need to switch from drilling Pocket-Holes to driving Pocket-Screws,
in a matter of seconds. Components include an innovative Quick Change Chuck, a 6” #2 Square Driver, and the all
new 3/8” Hex-Shank Pocket-Hole Drill Bit – including allen wrench and depth collar.

Rugged depth collar and allen wrench, works for any 3/8” Kreg drill bit. Designed for controlling the depth of your drill bit when drilling standard Pocket-Holes with any of our Kreg Jigs.

The #2-6" Pockethole driver come in standard tipped version.

Conceal your Pocket Holes

Most of the time pocket holes can be placed on the backside or underside of a project where they are hidden from view. From time to time however, you may find the need to place one in a visible location. We offer solid wood plugs in a variety of wood species that can be glued in and sanded flush to conceal the hole.