For use with scroll saws, drill presses power carving tools, or other stationary power tools that the user wants to turn on and off without using the manual switch. Just plug your tool into the foot switch and the press foot switch down to turn power on, then press switch down again to turn the power off. Use its generous 6-1/2 ' cord to locate the switch in a convenient position. Great for 115 Volt tools up to 15 amps.

• Turn tools on and off while performing tasks that require both hands
• Features large 2-1/2" x 4" pedal for easy use
• No need to free a hand to hunt for your power switch
• Great performance and price
  

Operate your router, scroll saw and other tools with hands-free convenience. This spring loaded safety switch turns on the tool when you press the switch down and turns off the tool when you lift your foot from the pedal. Simply plug our foot switch into your electrical outlet, then plug your tool into the Deadman Foot switch 15 Amp. Includes 6-1/2' foot cord.

• Hands-free control means both hands on your work for more control
• No need to free a hand to hunt for your power switch
• Great performance and price
• Features large 2-1/2" x 4" pedal for easy use

Every router table needs a power switch--it's unacceptably dangerous, not to mention awkward, to use the switch on the router itself, buried out of sight beneath the table. This ready-to-use accessory lets you mount a switched power outlet right where you need it at the front of your router table or other shop-made fixture. It's a lockable switch; if you have small children around the shop, just remove the toggle tip to make the router table safe from unauthorized start-up. The switch controls power to a built-in 110-volt receptacle which handles loads up to 15 amps--plenty for any 110-volt router on the market. Screw tabs allow easy surface mounting wherever convenient. 5-3/4" long x 2-1/2" wide x 3" deep. Comes with 5 ft. power cord.

This is an economical 15-amp switch, designed for use with scroll saws, sanders, lathes, router tables, or any bench-top tool application. The switch includes a 5-1/2' grounded cord with a 3-pin end and a 3-pin receptacle above the switch. A large paddle switch with removable child protective lock is easy to locate and turn the tool off. The housing is constructed from high impact plastic and the switch’s rear plate is made of heavy gauge steel with mounting tabs at the top and bottom.

Add Safety and convenience to your router table with this incredibly handy power switch from Kreg tools. The switch features a 2-plug design which allows it to control two independent devices at once. The Key-Lock™ eliminates accidental power-on and has a long 8ft. heavy duty 14 gauge power cord. The Kreg power switch will mount and work with most router tables, stands and routers.

Simply plug in the speed control then plug your router into the speed control. Adjust speed from 0 RPM to full speed. The Heavy Duty Speed Control features an aluminum case, and is recommended for home shop or industrial use. 3 position rocker switch- Variable / OFF / Full Speed. Full power and torque at all speeds. Go back and forth from any preset speed to full speed at the flip of a switch. Works with all routers 3-1/4 HP or less. 120V 15AMP. Doesn't work with soft start routers.