Variable speed control adjusts router to smoothest and safest cutting speed. With no speed adjustment, a 2" bit has a screaming tip speed of 120 MPH - UNSAFE! If you have a single speed router, get this electronic control. It will regulate your speeds to bit manufacturers recommended RPMs.

15 amp Heavy Duty Foot Switch
This switch works as a on / off switch.
Foot presure down turns the switch on, with second foot presure turning the switch off.

15 amp Heavy Duty Foot Switch
This switch works only when it is held
down with foot presure.

Every router table needs a power switch--it's unacceptably dangerous, not to mention awkward, to use the switch on the router itself, buried out of sight beneath the table. This ready-to-use accessory lets you mount a switched power outlet right where you need it at the front of your router table or other shop-made fixture. It's a lockable switch; if you have small children around the shop, just remove the toggle tip to make the router table safe from unauthorized start-up. The switch controls power to a built-in 110-volt receptacle which handles loads up to 15 amps--plenty for any 110-volt router on the market. Screw tabs allow easy surface mounting wherever convenient. 5-3/4" long x 2-1/2" wide x 3" deep. Comes with 5 ft. power cord.

This is an economical 15-amp switch, designed for use with scroll saws, sanders, lathes, router tables, or any bench-top tool application. The switch includes a 5-1/2' grounded cord with a 3-pin end and a 3-pin receptacle above the switch. A large paddle switch with removable child protective lock is easy to locate and turn the tool off. The housing is constructed from high impact plastic and the switch’s rear plate is made of heavy gauge steel with mounting tabs at the top and bottom.