Keep your tools close and your shirt clean with this canvas Bib Apron.

• Lightweight face piece is made of soft medical class silicone and fits comfortably.
• Easy-adjust headband.
• Convenient battery pack clips on belt and has high/low adjustment.
• Comes with two dust cartridges and 10 fiber pre-filters .
• Powered by 4 AA batteries (not included).
• Comes in plastice storage case for clean storage.

Fastcap's new MXV Dust Masks are a superior quality filtration
system. These high quality dust masks are perfect for general purpose non-toxic applications where dust and particles are present. The Easy Breath exhale valve keeps the dust out and helps prevent the fogging of your safety glasses while you work. It is so comfortable you may forget you're wearing it. The MXV dust masks come in packs of 10.

These fully adjustable frame safety glasses are constructed
of a tough poly carbonate plastic for extra long life. The lenses are 2mm thick and exceed ANSI standards for impact resistance.

Cat Eyes Safety Glasses are ultra comfortable safely glasses featuring shatterproof, wrap around lenses with anti fog coating. The reinforced temples have adjustable arm length for customizing the fit.

• Reinforced temples
• Quaility construction
• Powerful diopters keep things focused
• Anti-Fog coating
• Adjustable arm length

Cat Eyes Safety Mags are ultra comfortable, bifocal safely glasses featuring shatterproof, wrap around lenses with anti fog coating. The reinforced temples have adjustable arm length for customizing the fit.

• Reinforced temples
• Quaility construction
• +1.5 - +2.0 - +2.5 - +3.0
• Powerful diopters keep things focused
• Anti-Fog coating
• Adjustable arm length

Read Small Marks With Ease

We all need ear protection from all those loud machines in our workshops. These ear muffs will drown out virtually all the sounds up to 20 decibels. Easy slide ear piece adjustment with extra thick foam padding on the head piece and the ear pieces for comfort.

Nothing stands up to abrasion and abuse in the shop like leather, and nothing looks and feels quite as good either! Our one-piece apron measures a full 20" wide and 34" long and is cut from premium side split leather. This apron is strong on protection yet light weight enough to wear all day in the shop.

• 34in. long, 20in. wide

• heavy duty stitching

• leather waist strap.

• front breast pocket.

The new Kreg® multi-purpose pushstick is not your typical workshop safety device. It is well balanced and is made from a heavy-duty impact resistant plastic for repeated everyday shop use. The push stick has a built-in magnet for easy storage on most any metal surface in your workshop. It also has a built in pencil holder for quick access when needed. An ergonomic easy-grip handle is angled just right for complete user comfort when pushing stock through the cutter(s). Another unique feature of the push-stick is the built-in locking depth gauge for quick measurement of sawblade height or even router bit height gauging and it is removable when not needed. The Multi-Purpose Push Stick adds more than just safety to your woodshop. With features such as a built-in storage magnet, pencil holder, and removable locking depth gauge, the Multi-Purpose Push Stick adds true speed, safety and convenience to every cut you make!

• Use to guide wood through cutters

• Provides extra control for small pieces·

• Ergonomically designed handle fits hand "just right"

• Measures 11 1/2"· Ensures better safer cuts·

• For all table saws, radial saws,· shapers and jointers

• Natural rubber friction pads grip the workspace

• Work with confidence,keeping this block between your fingers and the cutting tool.

• Constructed of day-glo orange high-impact molded plastic.
  

• Natural rubber friction pads grip the work space

• Work with confidence,keeping this block between your fingers and the cutting tool.

• Constructed of day-glo orange

• High-impact molded plastic.

The GRR-Ripper™ System is a revolutionary precision woodworking hand pushing tool composed of different adjustable/detachable components that is used on the table saw, router table, shaper, or jointer. The tool utilizes multiple grooved non-slip pads to provide strong gripping and holding power for feeding work piece through the cutting elements.

MORE DETAILS

Safety Set includes

• push stick #1220

• push block #1221

• large push block #1222

This featherboard is the perfect solution for router table fences limited in space. It not only keeps your stock firmly against your table top, it acts as a router bit safety guard as well. The unique outward curve design keeps your fingers away from the cutters while feeding your stock through the cut and will not interfere with the router bit while cutting. The featherboard measures a full 101/4" long x 3" high.

• Fits all standard miter slots

• Use for cleaner cuts

• Good for long, narrow boards

• Made of wood and metal

• Ensures better safer cuts
  

A necessity for the safety-conscious woodworker, Board Buddies® maintain simultaneous, even pressure against the table and fence. You will find that using them results in safer, cleaner cutting operations.

Our custom made Board Buddies / Board Mates mounting bracket sets make mounting and adjusting your Board Buddies or Board Mates a snap. Made of UHMW comes with bolts and knobs.

Fits our Mini T-Track
(T-Track and board mate sold seperate)

3/8" x 3-1/4" x 7-1/2"
aprox. 2" up and down adjustment

This small featherboard works on a fence down to the table top. This Small Fence Featherboard is great for drill press fences, shop built Miter Saw Fence or any other fence with a 7/16" T-Slot for use with 1/4" hex head bolts.

3/8" x 7-1/4" x 8 "
aprox. 5 " up and down adjustment

This large Featherboard is a great hold down for, router table fences , drill press fences and much more, plus anti kickback. Best used with a 7/16" T-Slot for use with 1/4" hex head bolts. Get two, you will love them.

Convert this Large fence Featherboad for use on table tops with miter -slot using the Miter-Slot Jig & Fixture Set below. #1220

3/8" x 8-1/2" x 8-1/2"
aprox. 8-1/2 " up and down adjustment

This X-Llarge Feather board fits most everything , router table fences, drill press fences and much more. Great hold down power, plus anti kickback. Best used with a 7/16" T-Slot for use with 1/4" hex head bolts. Get two, you will love them.

Convert this X-Large fence Featherboad for use on table tops with miter -slot using the Miter-Slot Jig & Fixture Set below. #1220

Make your own jigs & hold-downs. Excellent for attaching feather boards, hold-downs, and special jigs to your table saw, router table, disc sander, or any other tool with a standard 3/4" wide x 3/8" deep miter gauge slot. The bars pull up tight in the slot as you tighten the knobs. These square-slot sars s fit both square and t-shaped miter gauge slots. Square-Slot Bars are 2-1/2" long and expand in the slot as you tighten the knobs. Each kit includes 2 each: jig bars, knobs with screws, and washers.

T-slot hardware holds the featherboard firmly in place, preventing any possibility of it lifting out of the miter gauge slot. Has both a light duty and heavy duty ends. Works in any table saw with a standard 3/8" x 3/4" square or t-shapped miter gauge slot. Adapts to fences to apply downward pressure.