HEAVY DUTY T-TRACK

Our T-Track is made in the USA out of 90% recycled aluminum to help our environment. The T-Track has a 1/8" wall which will not bow or twist and allows for everyday heavy use. The key to our system is a standard 3/8" hex head bolt that slides into the track. No more hunting for hard to find T-bolts or special locking pieces. The T-Track is perfect for building jigs and fixtures for your radial arm saw, workbench, drill press, miter saw, and various other machines. Our T-Track also works well for mounting anti-kickback devices to your table saw fence or router table fence

Larger View

MINI T-TRACK

Just as the heavy duty T-Track will amaze you so will our Mini-T-Track. This unique multi-use track offers smaller size and durability when designing your woodworking jigs. The Mini T-Track system uses a standard 1/4" hex head bolt and knob. Still no hard to find locking devices are needed. Our Mini T-Track works great for those tedious jobs on your work bench, router table, and table saw. You can also use it as a guide bar for your miter slot in the table saw or router table. The smaller the job the better for this Mini-T-Track

Larger View

Standard Miter T-Bar

The miter T-Bar fits the Standard Miter T-Tack above and all standard 3/8" x 3/4" equipment miter slots (table saw, drill press,bandsaw and other woodworking shop equipment)

With this unique Miter T-Bar you can build many different sliding jigs and fixtures for any shop tool with a standard miter slot.

Standard Miter T-Track

Works with standard 3/4" x 3/8" miter gauges with or without a T-slot.

Our track is great for shop built router tables that are not equipped to handle a miter gauge.

You can add a miter or sliding fixture to any thing that can be routed out to fit the Miter T-Track, work bench, table saw extensions,drill press tables, and band saw tables.

The profile matches nearly all T-Slots found on table saws. The track comes in 32", perfect for router tables, and 48" lengths to fit just about any table you could create. Mounting is easy - just cut a dado to fit the Miter T-Track.

Mini T-Track / Standard Miter T-Track
Dual Combo Track

Our dual track combines all the same features of the Miter T-Track and Mini T-Track into one solid extrusion.

The Miter T-Track works with standard 3/8" x 3/4" miter gauges with or without T-slot washer and the Mini T-track works with standard 1/4" hex head bolts.

This track works great for shop built drill press tops and router table tops.The track gives both a track to slide jigs and miter bars in as well as a hold down slot for toggle clamps and other hold downs.

Miter Track For Sears Size
Miter Slot Attachments

Works with standard Sears / Crasftsman miter gauges without a T-slot.

Our track is great for shop built router tables that are not equipped to handle a miter gauge.

You can add a miter or sliding fixture to any thing that can be routed out to fit the Miter T-Track, work bench, table saw extensions,drill press tables, and band saw tables.

Mounting is easy - just cut a dado to fit the Miter Track.ore >>

T-Track Cross Points

T-Track Cross Points allow for track to be installed so that  two T-Tracks cross at 90°.

With these T-Track Points you can build many types of jigs and fixtures for the shop, oval cutting jigs, two way sliding jigs for the drill press and table saw cross cutting sled plus much more.

Miter T-Track Locking Kit

The perfect accessory kit for attaching featherboard, hold-downs or virtually any type of jig you can think of to your table saw, router table, or any tool with a standard 3/4" x 3/8" miter gauge slot. The fixture kit works by applying outward pressure to the "walls" of the miter gauge slot. The "wedge" bolts push up into center counter sunk holes in the miter bar as they tighten with the star knobs, which pushes the center of the miter bar outward producing a nice tight fit.

The Fixture Kit includes:

• 2 ea. expandable miter bars
• 2 ea. star knobs
• 2 ea. wedge bolts
• 2 ea. washers

Star Knobs and Bolts

This high quality knob can be used for shop made jigs or replacement for that lost knob. Thread inserts are steel for long life.

Our T-track rollers can be used on your drill press, router table and more! The rollers slide into standard size T-track (1/4" x 20 or 3/8" x 16) and are secured with knob. The hardened rubber wheels contain bearings inside so they rotate freely which in turn allows you to feed your stock through without sticking or moving outward from your fence.

These t-track hold down clamps are designed to work with our T - track opening for either 3/8" or 1/4" sizes. The bottom of the clamp slides neatly into your t-track slot, and is adjustable to anywhere along the track. The clamp is fitted
with a 2-3/8” brass foot for excellent holding power. The clamping capacity is approx. 2-1/8”. This package is available in packs of two in 1/4” or 3/8"sizes. T-track not included.

Add safety to your T-Track fence system with the addition of this toggle hold down. Finger tightened nuts allow you to position the 35 lb clamp anywhere along the track. Large 2" vertical adjustment of hold down foot.

• # 2987 Fits heavy duty T-Track accepting 9/16" wide fasteners (3/8" bolt size).
• # 2988 Fits mini T-Track accepting 7/16" wide fasteners (1/4" bolt size).

Our Aluminum Hold Downs, both large and small are perfect for holding work pieces extra tight.

The large hold down comes with a 3/8" standard hex head bolt and knob for use with our Heavy Duty T-Track.

The small hold down comes with a 1/4" standard hex head bolt for use with our Mini-T-Track>>

UHMW Jig Miter Bar

Use this UHMW Jig Bar to build sliding jigs for the table saw, drill press, band saw or any place you use a miter gauge. Slides easy. Can be drilled and tapped.

Use these tall knobs to secure a router table fence, bandsaw fence and more. The tall knobs allow for easy adjustment,especially where reach may be an issue. The knobs are 4" long and have 1/4" x 20 threads.

T- Knob

This high quality knob can be used for shop made jigs or replacement for that lost knob. Thread inserts are steel for long life.

Round Knob w/2" Stud

This high quality knob can be used for shop made jigs or replacement for that lost knob. Thread inserts are steel for long life.

Thru Knob With Thru Hole

This high quality knob can be used for shop made jigs or replacement for that lost knob. Thread inserts are steel for long life.

Post Knob

This high quality knob can be used for shop made jigs or replacement for that lost knob. Thread inserts are steel for long life.

Ratchet Knobs

This high quality knob can be used for shop made jigs or replacement for that lost knob. Thread inserts are steel for long life.