Login e-Direct Sign up Cataloge Request Shopping Cart Home Page Home Page Product Index About Us Customer Service Shipping Ordering Retail Store
 

 

Savannah Woodworking Tools
Large Round Carbide Cutting Tool

Large Round Carbide Cutting Tool

The Savannah Large Carbide Turning Tool is designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Large Round cutter (item # 10747) is ideal for curved, concave surfaces and can also be used for general woodturning applications. The Savannah Large Round Carbide turning tool eliminates the need for sharpening of your turning tools since it features a rotatable cutter head. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter ((item # 10747). To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss.

Features:

  • Sharpening not necessary
  • Last longer than steel tools
  • Replaceable cutter heads
  • Solid ash handle is coated with a soft rubber grip
  • Shaft length is approximately 6-1/2”
  • Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule
  • Round carbide cutter head included

Please Note: The carbide cutter on this tool is NOT interchangeable with any of the other Savannah Carbide Turning Tools (7538,7539 & 7540).

 

Item# Description Price Quantity
7537
Large Round Carbide Cutting Tool
$89.99
10747
Round Carbide Replacement Cutter
$17.99

Product Divider Image

Savannah Woodworking Tools
Large Square Radius Carbide Cutting Tool

Large Square Radius Carbide Cutting Tool

The Savannah Large Carbide Turning Tool is designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Large Square cutter (item # 10750) is ideal for smoothing out cuts and for working convex surfaces with it’s slightly rounded profile. The Savannah Large Square Carbide turning tool eliminates the need for sharpening of your turning tools since it features a rotatable cutter head. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter (item # 10750). To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss.

Features:

  • Sharpening not necessary
  • Last longer than steel tools
  • Replaceable cutter heads
  • Solid ash handle is coated with a soft rubber grip
  • Shaft length is approximately 6-1/2”
  • Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule
  • Square carbide cutter head included

Please Note: The carbide cutter on this tool is NOT interchangeable with any of the other Savannah Carbide Turning Tools (7537,7539 & 7540).

 

Item# Description Price Quantity
7538
Large Square Radius Carbide Cutting Tool
$89.99
10748
Square Carbide Replacment Cutter
$13.99
10749
4" Radius Carbide Replacment Cutter
$13.99
10750
2" Radius Carbide Replacment Cutter
$13.99

Product Divider Image

Savannah Woodworking Tools
Large Diamond Carbide Cutting Tool

Large Diamond Carbide Cutting Tool

The Savannah Large Carbide Turning Tool is designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Large Diamond cutter (item # 10754) perfect for achieving smooth finishes in tight, small areas like detailed beads and coves in spindle turnings. The Savannah Diamond Carbide turning tool eliminates the need for sharpening of your turning tools since it features a rotatable cutter head. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter (item # 10754). To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss.

Features:

  • Sharpening not necessary
  • Last longer than steel tools
  • Replaceable cutter heads
  • Solid ash handle is coated with a soft rubber grip
  • Shaft length is approximately 6-1/2”
  • Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule
  • Diamond carbide cutter head included

Please Note: The carbide cutter on this tool is NOT interchangeable with any of the other Savannah Carbide Turning Tools (7537,7538 & 7540).

 

Item# Description Price Quantity
7539
Large Diamond Carbide Cutting Tool
$89.99
10754
Diamond Carbide Replacment Cutter
$18.99

Product Divider Image

Savannah Woodworking Tools
Hollowing Carbide Turning Tool

Hollowing Carbide Turning Tool

The Savannah Hollowing Carbide turning tool is the perfect tool for under-cutting hollow forms. Designed to allow any skill level of turners to achieve high quality results for hollowing work with virtually no fuss. The unique shape of the hollower neck is designed to give you better access to the most difficult hollow form shapes. The Handle measures approximately 19” in length from the butt to the stainless steel ferrule and is coated with a rubber grip at the base to reduce hand fatigue. The shank is flat on both sides offering you great stability while hollowing small or large forms. The shank measure approximately 8-3/4” from the top of the stainless steel ferrule to the center of the carbide cutter head. The round carbide cutter head can be rotated as needed for clean, sharp cutting edge. Once the carbide cutter is completely used up, simply replace the tip with a new one (item#10755).

Features:

  • Sharpening not necessary
  • Last longer than steel tools
  • Replaceable cutter heads
  • Solid ash handle is coated with a soft rubber grip
  • Shaft length is approximately 8”
  • Handle length is approximately 19-3/4” from the butt to the stainless steel ferrule
  • Diamond carbide cutter head included

Please Note: The carbide cutter on this tool is NOT interchangeable with any of the other Savannah Carbide Turning Tools (7537,7538 & 7540).

 

Item# Description Price Quantity
7540
Hollowing Carbide Turning Tool
$99.99
10755
Round Carbide Replacment Cutter
$16.99

Product Divider Image

Savannah Logo
3 Piece Mini Turning Tool Set

3 Piece Mini Turning Tool Set

Eliminate the inconvenience of sharpening your turning tools. Just rotate the tip when it becomes dull for a fresh, clean cutting edge. The carbide tips will stay sharper longer compared to standard turning tools. The tips are replaceable when needed (extra tips sold separately). The handles each have molded grips that provide better grip and less fatigue.

Over all Length: Approximately 13-1/8"

Handle Length: Approximately 9-1/8"

Tool Shaft: Approximately 4"

Set Includes:

  • 1 ea. Mini Turning Tool with Square Carbide Tip
  • 1 ea. Mini Turning Tool with Round Carbide Tip
  • 1 ea. Mini Turning Tool with Diamond Carbide Tip

Note: Tips can be replaced with Easy Wood Carbide Tips.

 

Item# Description Price Quantity
7382
3 Piece Mini Turning Tool Set
$149.99
10751
Easy Wood Tools Square Carbide Cutter - Ci2-SQ
$13.99
10753
Easy Wood Tools Round Carbide Cutter - Ci3
$16.99
10754
Easy Wood Tools Diamond Carbide Cutter - Ci4
$18.99

Product Divider Image

Savannah Woodworking Tools
Bowl Gouges

Savannah Woodtrning Gouges

These quality turning tools are made from high speed steel and are fitted with brass ferrules, shaped and weighted to assure great performance. Purchase individually or in discounted sets. Bowl gouges are generally used for removing material from the inside of a bowl.

 

Item# Description Price Quantity
7389
3/8" Bowl gouge 22-1/2" long
$16.99
7390
1/2" Bowl gouge 22-1/2" long
$19.99
7391
5/8" Bowl gouge 22-1/2" long
$26.99
7087
Set of all 3 bowl gouges
$61.99

Product Divider Image

Savannah Woodworking Tools
2" Roughing Gouge

2 inch roughing gouge by Savannah woodworking tools

The 2” roughing gouge helps you remove large quantities of stock to get your workpiece to a round workable shape. The large 2” flute on this roughing gouge enables you to work with large pieces that can otherwise be difficult with a smaller roughing gouges. It will also work on smaller projects as well. Made from high speed steel with a 13-1/2” hardwood handle and 6-1/8” tool secured with a brass ferrule. CAUTION: Roughing Gouges are specifically designed to be use as a roughing tool. Roughing Gouges are NOT designed to cut cross grain or inside bowls as it is likely to catch and cause damage to the tool or cause personal injury.

 

Item# Description Price Quantity
7392
2" Roughing Gouge
$41.99

Product Divider Image

Savannah Woodworking Tools
1" Roughing Gouge

Savannah 1" Roughing Gouge

The 1” Roughing Gouge helps you remove large quantities of stock to get your square stock workpiece to a round workable shape.

Specifications:

  • Made from High Speed Steel (HHS)
  • 10" Hard Wood Handle
  • 6-3/8" Tool Lenth secured with Brass Ferrule
  • 16-3/8" Over All Tool Length

 

 

Item# Description Price Quantity
7549
Savannah 1" Roughing Gouge
$17.99

Product Divider Image

Savannah Woodworking Tools
3/4" Roughing Gouge

Savannah 3/4" Roughing Gouge

The 3/4” Roughing Gouge helps you remove large quantities of stock to get your square stock workpiece to a round workable shape.

Specifications:

  • Made from High Speed Steel (HHS)
  • 10" Hard Wood Handle
  • 6-3/8" Tool Lenth secured with Brass Ferrule
  • 16-3/8" Over All Tool Length

 

Item# Description Price Quantity
7550
Savannah 3/4" Roughing Gouge
$16.99

Product Divider Image

Savannah Woodworking Tools
1/2" Spindle Gouge

Savannah 1/2" Spindle Gouge

The 1/2" Spindle Gouge is designed for cutting coves in spindle turned work, but these versatile tool can also be used to rough down stock, make V cuts, form beads, and hollow endgrain boxes.

Specifications:

  • Made from High Speed Steel (HHS)
  • 10" Hard Wood Handle
  • 6-1/4" Tool Lenth secured with Brass Ferrule
  • 16-1/4" Over All Tool Length

 

 

Item# Description Price Quantity
7551
Savannah 1/2" Spindle Gouge
$16.99

Product Divider Image

Savannah Woodworking Tools
1" Skew Chisel

Savannah 1" Skew Chisel

The 1" Skew Chisel is a versatile and invaluable tool for any turner, and is almost exclusively used when turning spindles. It will plane, turn beads, make 'V' cuts, pummel cuts and turn long, shallow coves. It can also be used to create dovetails for various chucking methods.

Specifications:

  • Made from High Speed Steel (HHS)
  • 10" Hard Wood Handle
  • 6-1/4" Tool Lenth secured with Brass Ferrule
  • 16-1/4" Over All Tool Length

 

Item# Description Price Quantity
7552
Savannah 1" Skew Chisel
$17.99

Product Divider Image

Savannah Woodworking Tools
5/8" Skew Chisel

Savannah 5/8" Skew Chisel

The 5/8" Skew Chisel is a versatile and invaluable tool for any turner, and is almost exclusively used when turning spindles. It will plane, turn beads, make 'V' cuts, pummel cuts and turn long, shallow coves. It can also be used to create dovetails for various chucking methods.

Specifications:

  • Made from High Speed Steel (HHS)
  • 10" Hard Wood Handle
  • 6-3/16" Tool Lenth secured with Brass Ferrule
  • 16-3/16" Over All Tool Length

 

Item# Description Price Quantity
7553
Savannah 5/8" Skew Chisel
$15.99

Product Divider Image

Savannah Woodworking Tools
5/8" Round Nose Scraper

Savannah 5/8" Round Nose Scraper

The 5/8" Round Nose Scraper is used to hollow and finish concave surfaces such as inside bowls and goblets.

Specifications:

  • Made from High Speed Steel (HHS)
  • 10" Hard Wood Handle
  • 6-3/8" Tool Lenth secured with Brass Ferrule
  • 16-3/8" Over All Tool Length

 

Item# Description Price Quantity
7554
Savannah 5/8" Round Nose Scraper
$15.99

Product Divider Image

Savannah Woodworking Tools
3/16" Parting Tool

Savannah 3/16" Parting Tool

The 3/16" Parting Tool is used to part timber into two separate pieces, but it is used predominantly to make sizing cuts, such as fillets on spindle turning or spigots for chucking methods.

Specifications:

  • Made from High Speed Steel (HHS)
  • 10" Hard Wood Handle
  • 6-1/4" Tool Lenth secured with Brass Ferrule
  • 16-1/4" Over All Tool Length

 

 

Item# Description Price Quantity
7555
Savannah 3/16" Parting Tool
$15.99

Product Divider Image

Savannah Woodworking Tools
5/8" Shear Scraper

Savannah 5/8" Shear Scraper

The 3/16" Shear Scraperl is used for fairing the curves on your projects, eliminating torn grain and refining the quality of the surface prior to sanding.methods.

Specifications:

  • Made from High Speed Steel (HHS)
  • 10" Hard Wood Handle
  • 6-5/16" Tool Lenth secured with Brass Ferrule
  • 16-5/16" Over All Tool Length

 

Item# Description Price Quantity
7556
Savannah 5/8" Shear Scraper
$15.99

Product Divider Image

Savannah Turning Tools
Savannah HSS Wood Lathe 8-Piece Chisel Set
with Tool Roll

Savannah HSS Wood Lathe 8-Piece Chisel Set
with Tool Roll

The ideal turning set for wood turners of any skill level. This set contains 8 of the most commonly used tools and a convenient 32” x 24” turning tool storage roll to protect, store and transport your tool when needed. The Savannah tools are the ideal set for turning small pens, spindles, bowls and larger projects. The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use. Store your lathe turning chisels, gouges, skews and more in this convenient turning tool storage roll! Measuring approximately 32" x 24" when laid out, the tool roll provides plenty of room for your lathe tools. The canvas roll has 14 pockets measuring 13-1/2” deep and the pockets vary slightly in width for different size tools. Two nylon web straps with buckles secure the tool roll after it is rolled up. The tool roll also includes a handy carrying strap for easy transport of your tools.

The set includes 8 essential chisels:

  • 1" Roughing Gouge
  • 3/4" Roughing Gouge
  • 1/2" Spindle Gouge
  • 1" Skew Chisel
  • 5/8" Skew Chisel
  • 5/8" Round Nose Scraper
  • 3/16" Parting Tool
  • 5/8" Spear Scraper
  • 32" x 24" Turning Tool Storage Roll

 

 

Savannah HSS Wood Lathe 8-Piece Chisel Set
with Tool Roll Savannah HSS Wood Lathe 8-Piece Chisel Set
with Tool Roll
Item# Description Price Quantity
7587
Savannah HSS Wood Lathe 8-Piece Chisel Set with Tool Roll
$89.99

Product Divider Image

Savannah Turning Tools
8 Piece Wood Turning Set

Savannah 8 Piece Wood Turning Set

This 8 piece set will satisfy the majority of your turning needs and suitable for turners of all skill levels. This set is ideal for turning pens or much larger projects on lathes of any size. The High Speed Steel out lasts high-carbon 6 to 1 and will give you years of service. The set includes 8 essential chisels with beautifully turned hardwood handles packaged in a practical and attractive wood display box. Overall length is approximately 16-1/2"" with 6-1/2" blades and 10" handles.

Set includes:

  • 1" Roughing Gouge
  • 3/4" Roughing Gouge
  • 1/2" Spindle Gouge
  • 1" Skew Chisel
  • 5/8" Skew Chisel
  • 5/8" Round Nose Scraper
  • 3/16" Parting Tool
  • 5/8" Spear Scraper

 

Item# Description Price Quantity
7173
Savannah 8 Piece Wood Turning Set
$89.99

Product Divider Image

Savannah
Bottle Stopper Chucks

Bottle Stopper Chucks

These bottle stopper chucks are ideal for turning blanks that will be used on smaller bottle stopper hardware. The chucks have a collar milled right onto the chuck to make the process of sizing the bottle stopper super easy.

Chuck come in three sizes:

  • Standard Chuck Item #7588
    • Chuck 1" x 8tpi
    • Collar approximately 29/32" diameter
  • Mini Chuck Item #7589
    • Chuck 1" x 8tpi
    • Collar approximately 13/16" diameter
  • Micro Chuck Item #7590
    • Chuck 1" x 8tpi
    • Collar approximately 19/32" diameter

Item# Description Price Quantity
7588
Standard Bottle Stopper Chuck
$8.99
7589
Mini Bottle Stopper Chuck
$8.99
7590
Micro Bottle Stopper Chuck
$8.99

Product Divider Image

Previous Page