Login e-Direct Sign up Cataloge Request Shopping Cart Home Page Home Page Product Index About Us Customer Service Shipping Ordering Retail Store
 

 

Robert Sorby Logo
Parting Tool HSS 1/8"

Parting Tool HSS 1/8"

Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" -3mm tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and fillets.

Item# Description Overall Length Handle Length Price Quantity
11022
Standard Parting Tool
HSS 1/8" B830031
13-1/2" 8-1/2" $44.99
11075
Unhandled Parting Tool
HSS 1/8" 830
    $31.99

Product Divider Image

Robert Sorby Logo
Slim Parting Tool 1/16"

Slim Parting Tool 1/16"

This 1/16" handy parting tool is designed to give the cleanest and finest of cuts with the minimum of waste wood. Its 1.1/4" blade width eliminates the flexing and twisting normally associated with such a thin blade. The double bevel HSS cutting face gives the very finest of cuts. And for added security the blade is seated and riveted deep in the handle.

Item# Description Price Quantity
11023
Slim Parting Tool 1/16" B830S08
$29.99

Product Divider Image

Robert Sorby Logo
Fluted Parting Tool HSS 2MM

Fluted Parting Tool HSS 2MM

This tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. This features a radically new and unique cutting profile with a blade profile of only 2mm. The long bevel has a milled flute which is the cutting face. The small bevel his the sharpening face. When parting off, this unique arrangement causes the tip to always cut at a shear cutting angle of 45º, producing a finish without equal from a parting tool, virtually eliminating the need for sanding.

Item# Description Overall Length Handle Length Price Quantity
11024
Fluted Parting Tool HSS 2MM B832023
18-1/2" 12" $64.99
Product Divider Image

Robert Sorby Logo
Bedan HSS 3/8"

Bedan HSS 3/8"

Used in the same way as the beading and parting tool the relieved side bevel allows the tool to plunge cut in bowls and boxes with little risk of binding.

Item# Description Overall Length Handle Length Price Quantity
11025
Fluted Parting Tool HSS 2MM B832023
18-3/4" 12" $56.99
11076
Bedan HSS Un-handled 3/8" 834
$42.99
Product Divider Image

Stone Mountain Logo
1/8" Diamond Parting Tool

1/8" Diamond Parting Tool

Parting tools allow the lathe to be used for cutting to a specific diameter or cutting through wood stock. A pointed tool used to separate (part off) work from the lathe, and to create a straight edge separating large and small diameter sections. Used as a standard parting tool would be, however, the special diamond section of this tool lessens the chance for binding in the cut, and reduces friction and burning.

Item# Description Price Quantity
7082
1/8" Diamond Parting Tool
$32.99

Product Divider Image

Stone Mountain Logo
3/16" Diamond Parting Tool

3/16" Diamond Parting Tool

Parting tools allow the lathe to be used for cutting to a specific diameter or cutting through wood stock. A pointed tool used to separate (part off) work from the lathe, and to create a straight edge separating large and small diameter sections. Used as a standard parting tool would be, however, the special diamond section of this tool lessens the chance for binding in the cut, and reduces friction and burning.

Item# Description Price Quantity
7067
3/16" Diamond Parting Tool
$36.99

Product Divider Image

Stone Mountain Logo
3/8" Beading / Parting Tool

3/8" Beading/Parting Tool

The Beading and Parting Tool is extremely versatile. Used for sizing, making beads or v-grooves on cylinders between centers. Its finesse allows for the production of beads whilst it can also be used for conventional parting off. Its more massive section makes it much more rigid and hence it is ideal for making spigots.

Item# Description Price Quantity
7077
3/8" Beading/Parting Tool
$33.99

Product Divider Image

Savannah Woodworking Tools
Large Diamond Carbide Cutting Tool

Large Diamond Carbide Cutting Tool

The Savannah Large Carbide Turning Tool is designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Large Diamond cutter (item # 10754) perfect for achieving smooth finishes in tight, small areas like detailed beads and coves in spindle turnings. The Savannah Diamond Carbide turning tool eliminates the need for sharpening of your turning tools since it features a rotatable cutter head. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter (item # 10754). To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss.

Features:

  • Sharpening not necessary
  • Last longer than steel tools
  • Replaceable cutter heads
  • Solid ash handle is coated with a soft rubber grip
  • Shaft length is approximately 6-1/2”
  • Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule
  • Diamond carbide cutter head included

Please Note: The carbide cutter on this tool is NOT interchangeable with any of the other Savannah Carbide Turning Tools (7537,7538 & 7540).

Item# Description Price Quantity
7539
Large Diamond Carbide Cutting Tool
$89.99

Product Divider Image

 

Carter & Son Toolworks
1/8" Parting Tool

1/8" Parting Tool

There is nothing like a razor sharp parting tool! Our new 1/8" Parting Tool is machined from solid M42 to provide you with a razor sharp, long-lasting edge.

Graced by a solid aluminum handle, the tools is sturdy and you will enjoy easy maneuverability. The specific shape of the handle is designed to fit your hand for comfort. Beautifully engraved and polished, the handle will last a lifetime.

Our premium 1/8" Parting Tool is shipped sharp and ready to use - order your own today!

Features:

• A must have tool for every woodturner
• Tapered for less catching
• Perfect for pens, boxes and small projects
• Made from premium M42 HSS containing 10% cobalt
• Hones to a finer edge
• Superior edge holding ability Hardened to 68 HRC
• Hand Sharpened Made in USA

Handled Specifications:

Blade
Width
Blade Overall Tang
Size
Handle
Length
1/8"
9-1/2"
1/2"
12"


UN-Handled is the same specification minus handle Length.

Item# Description Price Quantity
5310
1/8" Parting Tool Handled / PT18-12
$134.99
5329
1/8" Parting Tool Handled / PT18-T
$84.99

Product Divider Image

 

Carter & Son Toolworks
3/16" Parting Tool

3/16" Parting Tool

Nothing can replace a parting tool and the many cuts it can preform, making a strong, dependable parting tool a necessity for every turner.

Our 3/16" parting tool is machined from solid M42 high speed steel and is heat-treated for strength and durability. Hand sharpened, this tapered parting tool is strong and dependable, ready for any task. This larger size parting tool is perfect for your larger projects.

Features:

• A must have tool for every woodturner
• Tapered for less catching
• Perfect for pens, boxes and larger projects
• Made from premium M42 HSS containing 10% cobalt
• Hones to a finer edge
• Superior edge holding ability Hardened to 68 HRC
• Hand Sharpened Made in USA

Handled Specifications:

Blade
Width
Blade Overall Tang
Size
Handle
Length
3/16"
9-1/2"
1/2"
12"


UN-Handled is the same specification minus handle Length.

Item# Description Price Quantity
5311
3/16" Parting Tool Handled / PT316-12
$134.99
5340
3/16" Parting Tool UN-Handled / PT316-T
$84.99

Product Divider Image

 

Carter & Son Toolworks
3/8" Bedan

3/8" Bedan

When it comes to precise work, a razor edge is imperative! Machined from M42 HSS, the 3/8" Bedan bit is strong and sharp for smooth, clean cuts. This tool is perfect for ensuring that your foot is just the right size.

Our premium 3/8" Bedan is shipped sharp and ready to use - order your own today!

Features:

• Made from premium M42 HSS containing 10% cobalt
• Perfect for foot work
• Hones to a finer edge
• Superior edge holding ability
• Hardened to 68 HRC
• Hand ground at Carter and Son Toolworks
• Made in USA

Handled Specifications:

Blade
Width
Blade Overall Tang
Size
Flute
Measures
3/8"
8"
1/2"
1/4" x 4-1/4"


UN-Handled is the same specification minus handle Length.

3/8" Bedan 3/8" Bedan 3/8" Bedan
Item# Description Price Quantity
5308
3/8" Bedan Handled / B38-12
$134.99
5328
3/8" Bedan UN-Handled / B38-T
$79.99

Product Divider Image

Carter & Son Toolworks
Signature Woodturning Handles

16" Signature Woodturning Handles 12" Signature Woodturning Handles

Because our handles are solid aircraft grade aluminum they are strong and maneuverable as well as chatter reducing. The specific shape of the handle is designed to fit your hand for comfort. Beautifully engraved and polished, the handle will last a lifetime. Two set screws secure our tools 3” into the handle for extra versatility. Add some power to your turning!

  • 3/4" bore
  • Even weight for maneuverability & balance
  • Designed to fit your handle for comfort
  • Made in the USA and backed by a lifetime guarantee
#5333 #5334

Item# Description Price Quantity
5333
16" Signature Woodturning Handles / AH-16/34
$79.99
5334
12" Signature Woodturning Handles / AH-12/34
$74.99

Product Divider Image

Carter & Son Toolworks
Signature Woodturning Adapters

Signature Woodturning Adapters

Complete interchangeability is possible with premium Carter and Son Toolworks adapters. Each adapter is machined to precise parameters from aircraft grade aluminum, ensuring a chatter reducing fit between tool and handle.

Carter & Son adapters will fit any 3/4” diameter handle, bringing the inside diameter down to 5/8", 1/2” or 3/8".

  • Meticulously designed by turners, for turners.
  • Lightweight yet long-lasting aluminum.
  • Groove on top makes the sleeves easy to slip in and out of the handle for a quick tool change.
  • Hand inspected.
  • Made in the USA.
  • 100% lifetime guarantee.

Item# Description Price Quantity
5330
5/8" Signature Woodturning Adapters / A58
$19.99
5331
1/2" Signature Woodturning Adapters / A12
$19.99
5332
3/8" Signature Woodturning Adapters / A38
$19.99

Product Divider Image

Previous Page