Call Toll Free 1-888-512-9069
Shopping Cart

Fulton
Panel Max & Panel Max XL
Glue Press System

Panel Max Pro System
Panel Max Pro System Panel Max Pro System Panel Max Pro System Panel Max Pro System

Note:
Wood & Wood Rails Not Included


Download Instructions for Panel Max

Download Instructions for Panel Max

Download Instructions for Panel Max XL
Download Instructions for Panel Max XL

Glue-up large or small panels with great looking, professional results every time with the Panel Max & Panel Max XL Glue Press System. The Panel Max makes stronger, more uniform joints than standard pipe or bar clamps. Unlike pipe or bar clamps, which tend to over-tighten on the bar side, The Panel Max applies even, uniform pressure to the stock surface since it completely surrounds the work piece, which creates superior quality joints with less hassle. This system also cuts the surface area required for glue-ups down about 90% since it is mounted vertically to any wall in your shop and stays out of your way while the stock is drying. When considering purchasing wide boards consider this; wide stock pieces cost more and tend to warp when purchased from a store or lumber yard; with the Panel Max Glue Press you can glue up a series of narrow boards to produce wide, warp-resistant panels for much less money. The Panel Max also aligns your boards better than standard clamps, resulting in your panels gluing up flat which will require less planing and surfacing. You can also add or remove clamp rails easily by sliding them out of the rails.

The Panel Max system includes:

  • 3 each of the 43" clamps and hardware.
  • 1 each of the 39" mounting rails.
  • With one system you can glue panels up to:
    • 37" Tall x 48" Wide x 5" Thick
    • (3" Recommended Thickness)

The Panel Max XL system includes:

  • 3 each of the 55" clamps and hardware.
  • 1 each of the 39" mounting rails.
  • With one system you can glue panels up to:
    • 49" Tall x 48" Wide x 5" Thick
    • (3" Recommended Thickness)
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Panel Max System & Add-On Accessories
Item# Description Price Quantity
2952 Panel Max System $349.99
2953 Panel Max Add-On Kit Includes:
2 ea. 43" Clamp Rail & 1 Ea. 39" Mounting Rail
$249.99
2954 Panel Max 43" Clamp Rail
Includes 1 each
$119.99
2955 Panel Max 39" Mounting Rail 1 each
for Panel Max or Panel Max XL
$24.99

Panel Max XL System & Add-On Accessories
Item# Description Price Quantity
555 Panel Max XL System $399.99
556 Panel Max XL Add-On Kit Includes:
2 ea. 55" Clamp Rail & 1 Ea. 39" Mounting Rail
$274.99

Fulton
4 Way Pressure Clamp

4 Way Pressure ClampEqual Clamping Pressure on all 4 Sides

4 Way Pressure Clamp
4 Way Pressure Clamp

Attach the notched bars to any length 1-1/2" x 1-3/4" board (a 2" x 4" board ripped in half) with provided screws, set clamp and turn handle to tighten ( on large pieces, we recommend one clamp every 18" for maximum clamping efficiency). The clamp has plastic pressure pads so you don't damage the edge of your stock. Build any length clamp with the tough plastic bars with 12 notches for maximum adjustability to handle a variety of stocks widths. The clamp can be adjusted for boards up to 6" in thickness.

Features:

  • Perfect for gluing table tops, furniture panels and more!
  • Large panel glue-ups are now easier.
  • Easy to assemble.
  • Handles stock up to 6" thick.
  • Buckling of boards is eliminated.
  • Stock stays flat during glue-up.

Package Includes:

  • 2 ea. 12-3/4" Long notch bar
  • 2 ea. 6-7/8" Long notch bar
  • 1 ea. Clamp assembly head
  • 1 ea. Clamp assembly tail
  • Assembly Screws


Note:
Wood not included

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
670 Fulton 4 Way Pressure Clamp - 1 each $34.99
666 Fulton 4 Way Pressure Clamp - 2 each $64.99
612 Replacement Bars - 4 pack $10.99

General
EZ Joiner Aluminum Clamp Board Straightening Kit

EZ Joiner Aluminum Clamp Board Straightening Kit

The General Tools EZ Joiner Aluminum Clamp Board-Straightening Kit is intended to help you straighten crooked boards, true-up rough-sawn edges and make shallow taper cuts with positive control.

Features:

  • Fits any length of stock up to 2 in. thick
  • Straighten crooked boards, true-up rough-sawn edges and make shallow taper cuts with positive control
  • Aluminum construction
  • Mount clamps to table-saw guide board to create a straight reference guide to strengthen any length of lumber (guide board and table saw not included)
  • Helps you attain a straight edge with just 1 pass

Includes:

  • 2 ea. Clamps
  • 4 ea. Threaded screws with flat board supports
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
20872 EZ Joiner Aluminum Clamp Board Straightening Kit $18.99

Fulton
Pinch Dogs

Pinch Dogs

Drive a Pinch dog into an end grain along a wooden joint, doing this allows the steel tapered pinch dog clamps to draw boards tightly together for gluing up panels, table bench tops and more. You can use the Pinch Dogs repeatedly without the worry of them twisting, bending or breaking. Use them to square corners. Pinch Dogs can also be used for column assembly.

Available in 1-1/2" & 2" width

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
801 1-1/2" Pinch Dogs 10 pack $19.99
802 2" Pinch Dogs 10 pack $20.99

Follow Us...
www.ptreeusa.com is owned and operated as a marketing resource of Peachtree Woodworking Supply Inc. , Atlanta, GA