Call Toll Free 1-888-512-9069
Shopping Cart

OneWay
#2 Morse Taper Live Center

#2 Morse Taper Live Center

The Live Center Provides Super Smooth Performance with Zero Play when Turning!

Included with Live Center:

  • 1 ea. Center Point
    Points are easily replaced when damaged.
  • 1 ea. Bull Nose Cone
    Reversible Bull Nose Cone provided for support on the outside or the inside of turnings. Full Point Cone
  • 1 ea. Full Point Cone
    A full point cone is included which is especially suitable for candle-stick type artistry.
  • 1 ea. Knock Out Rod
    One knock out rod is also included which is used to remove center points and as a spindle stop to accomplish attaching and removing cones.
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7700 #2 Morse Taper Live Center / 2064 $125.99

OneWay
Pen Turning Point

Pen Turning Point

Specifically designed for pen turners, this turning point for the Oneway Live Center is made from hardened steel to prevent damage caused by pen turning mandrels.

Features:

  • Optional accessory for Oneway Live Center
  • It's made from a solid piece of steel so you no longer have to be worried about wearing away the aluminum full point cone you have used in the past.
  • It's made from a solid piece of steel so you no longer have to be worried about wearing away the aluminum full point cone you have used in the past.
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7701 Pen Turning Point / 3673 $11.99

OneWay
OneWay #2 Morse Taper Extender

OneWay #2 Morse Taper Extender

This recommended accessory lengthens the tailstock barrel.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7702 OneWay #2 Morse Taper Extender / 3448 $24.99

OneWay
Wolverine Grinding Jig

Wolverine Grinding Jig - 2291
Note:
Sharpening system & Turning Tool Not Included

The WOLVERINE Grinding Jig is the CORE component of the ONEWAY WOLVERINE line of grinding products. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Owning the WOLVERINE Grinding Jig will ultimately save you time, frustration and money. You can now grind your tools properly the first time. Uniform cutting edges and single facet bevels will give you safer, more predictable tools. Because you are grinding your tools less, both your wheels and tools will last longer. The Grinding Jig comes with two bases - grinders come with two wheels, so we include two bases. By mounting one under each wheel, grinding operations can be rapidly performed on either side of your grinder without having to re-position bases. Bases are equipped with cam-lock clamping that makes the removal and installation of all attachments possible in 10 seconds or less. The cam forces all attachments rigidly into the base which eliminates all play. This Grinding Jig also comes equipped with an adjustable angle sturdy

platform that has a 3 x 5 inch working area. This platform can be used on both the left and right hand sides of the grinder. An adjustable speed handle makes adjustments quick and easy and ensures that the handle is never in the way. The Wolverine System was designed to replace conventional light duty toolrests with heavy duty universal grinding and dressing jigs for low cost grinders. Properly installed, with balanced wheels, this system will outperform grinders costing in excess of $500.00.

NOTE: When fitted to heavy duty grinders with cast iron tool rests and guards, some modification to these rests and guards may be necessary. If in doubt inquire before purchase.

Why is owning a grinding fixture so important?
More consistent grinding will give more consistent cutting, which will lead to fewer digs and better results.

Our Grinding Jig can be easily used to
sharpen the following tools:

  • GOUGES are ground in the Vee-Arm supplied with the WOLVERINE Grinding Jig. The Vee-Arm slides in the base and holds your bevel angle constant. It is long enough to hold any standard tool. Adjusting the arm is as easy as unlocking the clamping lever, moving the arm in or out, and re-clamping the lever. Once the proper angle is determined, turn on your grinder. Place the tool in the vee-pocket, rest the cutting edge directly on the wheel, and roll the tool. It's that simple. A popular shape to a bowl gouge is an "Irish" or "Side" grind. This type of grind is best achieved using the Vari-Grind Attachment.
  • CHISELS Carpenter chisels up to 1-1/4" wide can be sharpened using the Wolverine's Vee-Arm. The arm is adjusted to set the bevel, and the chisel can be ground with small sideways motions and light cutting pressure. Three or four strokes on a strop will generate a razor sharp edge.
  • SCRAPERS The Wolverine Grinding Jig comes with a 3 x 5 inch adjustable platform which allows even large scrapers to be ground with ease.
  • PARTING TOOLS Parting tools are sharpened using the platform. Laying it flat on its side on the platform gives a slight hollow grind which is very desirable for clean parting.
  • SKEWS The Wolverine's Vee arm can be used to sharpen skews, but a far superior method is ONEWAY's Skew Grinding Attachment.
  • CARVING TOOLS With a finely dressed 80 or 120 grit wheel, even very small carving tools can be superbly ground using the standard Vee-Arm.
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7703 Wolverine Grinding Jig - 2291 $94.99

OneWay
Wolverine Skew Grinding Attachment

Oneway Wolverine Skew Grinding Attachment

The Skew Jig was designed specifically for grinding Skews. It is quick and easy to use, and will give you an amazingly flat bevel. One reason that the skew leaves such an incredible finish on work pieces is due to its very thin edge which leaves naturally cleaner cuts. This creates a problem with sharpening the skew as this thin edge will easily fold over during grinding. ONEWAY's Skew Grinding Attachment minimizes this problem by allowing the skew to be mechanically held. The unique offset handle position actually reduces the hollow grind generated and leaves a stronger more predictable tool.

Problem Until now, we have been using the Wolverine Grinding Jig's Vee-Arm to grind skews. Straight from the pocket, a hollow grind can be produced at any angle you wish to achieve, or the rounded toe used by some turners. However, two problems occur using the Vee-Arm:

  • The bevel of the skew should be flat, and this method does produce a hollow grind
  • The cutting edge and bevel are not parallel

Solution Solving the first problem seemed impossible, to get a flatter grind you need a bigger wheel, so we set out to solve the second problem. The result was the ONEWAY Skew Grinding attachment. Very simply the jig is two pockets offset 3-1/2" to either side of center of the wheel. When the handle of the skew is placed in these pockets, the cutting edge becomes square to the wheel. But after we tried the jig something amazing happened. The bevel flattened itself out, which solves the first problem; excessive hollow grind.

How does this happen? Well, as the tool is moved side to side on the wheel, the offset position of the handle forces the tool slightly up and down the wheel. As the tool is forced up the wheel it grinds more off the back of the bevel and flattens the grind. The Skew Grinding Attachment produces a virtually flat bevel with greatly improved cutting characteristics. This fixture is a highly recommended option with our Wolverine Grinding System.

SKEW SHAPE: The skew, in order to cut effectively, should be ground with an angle of 70 degrees to 80 degrees looking from the top, and an included angle of 20 degrees to 35 degrees, depending on the wood to be cut and personal preference. The surfaces should be flat, not convex or concave. In an attempt to obtain a flat surface, some turners will grind the skew on the side of the grinding wheel, but this method is not recommended as some roundness will occur and for safety reasons.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7739 Oneway Wolverine Skew Grinding Attachment $32.99

OneWay
Vari-Grind Attachment for 1/8" to 5/8" Diameter Tools

Vari-Grind Attachment for 1/8" to 5/8" Diameter Tools

The Wolverine Original Vari-Grind Jig will properly shape and maintain the edge on standard bowl gouge, the modern side grind shape and the traditional fingernail shape. These shapes however are difficult both to grind and maintain. OneWay has spent a considerable amount of time and effort to develop a system which will consistently produce sharp, repeatable geometries on turning tools for the woodturner. This single attachment will produce every shape from the first mentioned fingernail grind right up to the side grind and everything in between to suit your needs.

Note: This Jig is designed to be used with the Wolverine Grinding Jig. This attachment can be used with it by creating a suitable rest position for the fixture. Turning tool not included

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7704 Vari-Grind Attachment - 2480 $57.99

OneWay
Vari-Grind 2 with Base

Vari-Grind 2 with Base - 3920

The Vari-Grind 2 features all the benefits of the Original Vari-Grind but increases ease of use, and safety. The Vari-Grind 2 restrains both side-to-side motion of the tool, as well as the pivot point so that the tool cannot slip in either direction.

The patented pivot point allows the tool to move in true cylindrical motion about the adjusting rod which produces a true fingernail and side grind at any bevel angle. The Vari-Grind 2 is the only restrained grinding jig that perform in this way. With the Vari-Grind 2 sharpening is virtually fool proof.

Designed with a bearing based clamp fitted with a nylon cap, the Vari-Grind 2 cannot damage the tool and can be easily replaced if it ever wears out.

Instructional DVD included.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7705 Vari-Grind 2 with Base - 3920 $107.99

OneWay
Precision Balancing System

Precision Balancing System

Drastically reduce grinder vibration with our Precision Balancing System. Your grinding wheels can now be accurately balanced in your own workshop! If you've been looking for a fast and effective way to balance your grinding wheels, look no further. Easy to setup and use, our new balancing system will quickly and easily allow you to balance your grinding wheels for life.

ONEWAY's balancing operation compensates for:

  • Wheel out of round
  • Wheel density
  • Hole not centered
  • Density variation
  • Thickness side to side variation of the wheel

Grinding wheels are sensitive to vibration due to their mass and speed. The faster your grinder, the more necessary it is to use balanced wheels.

Unbalanced grinding wheels are NOT something you want on your grinder for several reasons:

  • Inferior finishes on the tools that are being ground
  • Harm the bearings and bearing housings of the machine
  • Grinder may move wheels will not last very long due to excess material being removed threw the dressing and/or grinding process

Unfortunately, bench or pedestal grinders do not come equipped with a means to balance wheels.

Our Precision Balancing System will provide the following benefits:

  • Wheels, bearings, and bearing housings will last longer
  • Your machine will make less noise
  • Finishes on your tools and projects will be improved with less effort

Balanced wheels will give better grinding performance. Once completed, re-balancing should not be necessary for the life of the wheels. You will get better grinding performance needed to get sharp tools for better finishes on your turning projects. Our system is supplied with EVERYTHING YOU NEED to balance TWO grinding wheels with a 1" THRU-HOLE.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7706 1/2" Precision Balancing System / 2524 $69.99
7707 5/8" Precision Balancing System / 2272 $69.99

OneWay
Stronghold Chuck

Includes Either (Not Shown):
1-1/4" Taper-Lock Adaptor #7708
1" Taper-Lock Adaptor #7709

This heavy duty chuck is designed for large lathes (16" swing or greater) to provide maximum gripping power! The body diameter of this chuck is 4½" (the largest currently available in our chuck family). The chuck weighs approximately 8 lbs (fully assembled with the No. 2 Jaws). It is considerably heavier than the Talon Chuck (3.5 lbs) or Oneway Chuck (4.5 lbs) which makes it a very desirable chuck for large size lathe owners who want an exceptionally powerful grip for turning larger pieces.

The Stronghold Chuck is operated by a key. Key operation provides two major advantages:

  • One handed operation
  • Solid holding power
  • 5 to 1 ratio assures powerful clamping

Note: If your lathe is less than a 16" swing, we recommend our Talon Chuck.

Key Features Include:

  • Single-Hand Key Operation
  • Our Patented Over-Extension Safety System
  • 4-Jaw Scroll Chuck
  • Rugged Base Jaw Design

Complete Package Includes:

  • 1 ea. #2 Top Jaws
  • 1 ea. Taper-Lock Adaptor (Packaged Separately)
  • 1 ea. Key
  • 1 ea.1-1/2" RH Jumbo Screw
  • 1 ea. 4mm Hex Key
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7708 Stronghold Chuck w/ 1-1/4" Lock Adaptor - 2137 & 0322 $286.99
7709 Stronghold Chuck w/ 1" Lock Adaptor - 2137 & 0327 $286.99

OneWay
Stronghold Chuck Jaws

Item #7710 - Profiled Spigot Jaws - 2104

Item #7710 - Profiled Spigot Jaws - 2104

  • For turning small items
  • Machined long and deep for better grip on small parts
  • Not for use with woodworm screw
  Minimum Maximum
Spigot (external) 3/8" 1-7/8"
Recess (internal) 1-1/8" 2-5/8"
   
Item #7711 - #3 Profiled Jaws - 2106

Item #7711 - #3 Profiled Jaws - 2106

  • Mass and size necessary for large bowls and vases
  • For large bowls we recommend a 2" woodworm
  Minimum Maximum
Spigot (external) 3-7/8" 5-1/4"
Recess (internal) 4-1/2" 6"
   
Item #7712 - #4 Profiled Jaws - 3222

Item #7712 - #4 Profiled Jaws - 3222

  • Mass and size necessary for large bowls and vases
  • For large bowls we recommend a 2" woodworm
  Minimum Maximum
Spigot(external) 4-1/4" 5-3/4"
Recess (internal) 4-7/8" 6-1/2"
   
Item #7713- #5 Aluminum Jaws - 3777

Item #7713- #5 Aluminum Jaws - 3777

  • Extra light alloy jaws are ideal to holes platters and shallow bowls
  Minimum Maximum
Spigot(external) 5-1/8" 6-3/8"
Recess (internal) 5-7/8" 7-3/8"
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7710 Profiled Spigot Jaws For The Stronghold Chuck / 2104 $49.99
7711 #3 Profiled Jaws For The Stronghold Chuck / 2106 $59.99
7712 #4 Profiled Jaws For The Stronghold Chuck / 3222 $59.99
7713 #5 Profiled Jaws For The Stronghold Chuck / 3777 $59.99

OneWay
Talon Chuck

Talon Chuck

Specifications:

  • Light weight and small body diameter make it excellent choice for smaller lathes
  • Key operation for one handed operation and solid holding power
  • Two position key support for long life and accuracy
  • Gear teeth precision machined so they won't skip in use
  • 5 to 1 ratio assures powerful clamping
  • Body Diameter 3-1/2"
  • Approximate weight 3.5lbs

Complete Package Includes:

  • 1 ea. #2 Top Jaws
  • 1 ea. Taper-Lock Adaptor (packaged separately)
  • 1 ea. Key
  • 1 ea. 1-1/2" RH Jumbo Screw
  • 1 ea. 4mm Hex Key
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Talon Chuck Only
Item# Description Price Quantity
7717 Talon Chuck - 2985 $201.99

Talon Chuck with Adaptor
Item# Description Price Quantity
7698 Talon Chuck w/ 1" x 8 TPI Oneway/Talon Adapter $213.99
7699 Talon Chuck w/ 1-1/4" x 8 TPI Oneway/Talon Adapter $213.99

OneWay
Oneway / Talon Adaptors

Oneway / Talon Adaptors

#7740 1" x 8 TPI Oneway/Talon Adapter

Allows you to mount a Oneway Scroll Chuck (sold separately) or Talon Chuck (sold separately) to a lathe with a 1" x 8 TPI drive spindle.

#7741 1-1/4" x 8 TPI Oneway/Talon Adapter

Allows you to mount a Oneway Scroll Chuck (sold separately) or Talon Chuck (sold separately) to a lathe with a 1-1/4" x 8 TPI drive spindle.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7740 1" x 8 TPI Oneway/Talon Adapter $24.99
7741 1-1/4" x 8 TPI Oneway/Talon Adapter $24.99

OneWay Logo
Spigot Jaws for Talon Chuck

Spigot Jaws for Talon Chuck - 3016

Talon Capacities:

  Minimum Maximum
Spigot (external) 3/8" 1-3/4"
Recess (internal) 7/8" 2-3/8"

 

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7718 Spigot Jaws for Talon Chuck / 3016 $44.99

OneWay
#2 Tower Jaws Profiled for Talon & Oneway Chucks

#2 Tower Jaws Profiled Talon & Oneway Chucks

Talon & OneWay Capacities:

  Minimum Maximum
Spigot (external) 1-1/2" 2-5/8"
Recess (internal) 2" 3-3/8"
California Residents:
WARNNG: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7719 #2 Tower Jaws Profiled Talon & Oneway Chucks $54.99

OneWay
#3 Jaws Profile for Talon Chuck

#3 Jaws Profile for Talon Chuck

Talon Capacities:

  Minimum Maximum
Spigot (external) 3/8" 1-3/4"
Recess (internal) 7/8" 2-3/8"

 

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7720 #3 Jaws Profile for Talon Chuck / 3015 $51.99

OneWay
#3 Tower Jaws Profiled for Talon & Oneway Chuck

#3 Tower Jaws Profiled for Talon & Oneway Chuck

Talon & OneWay Capacities:

  Minimum Maximum
Spigot (external) 3-3/8" 4-1/2"
Recess (internal) 3-7/8" 5-1/8"

 

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7721 #3 Tower Jaws Profiled for Talon & Oneway Chuck $59.99

OneWay
Big Bite Chuck Spur

Big Bite Chuck Spur

Oneway Chuck Spurs are available to mount directly into Chucks made by Oneway. At 3-3/4" diameter it easily drives pieces up to 24" in diameter but is safely contained inside the body diameter of even our smallest chuck. The spur has a 1" locating plug to center securely into the chuck and it is grabbed crosswise by the jaws for a secure hold. The teeth and point are 60 degrees so it will bite deeply and easily. It takes advantage of the holding power of the chuck, making it very economical.

Note: Chuck not included.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7716 Big Bite Chuck Spur / 3946 $23.99

OneWay
1/2" Chuck Spur

1/2" Chuck Spur

Oneway Chuck Spurs are available to mount directly into Chucks made by Oneway. Because of the direct mounting capability, it is unnecessary to remove the chuck from your lathe to do spindle work. The 1/2" Chuck Spur is great for turning spindles that are less than an inch in diameter. (ie. chair legs) Total length is of Spur is 3".

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7714 1/2" Chuck Spur / 2027b $38.99

OneWay
1" Chuck Spur

1" Chuck Spur

Oneway Chuck Spurs are available to mount directly into Chucks made by Oneway. Because of the direct mounting capability, it is unnecessary to remove the chuck from your lathe to do spindle work. The 1" Chuck Spur will work best for anything of an inch in diameter or larger. Total length is of Spur is 3".

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7715 1" Chuck Spur / 2027a $38.99

OneWay
Large Easy Core™ Coring Systems & Knife Sets

16", 20" and 24" Easy-Core Coring System

Coring doesn't have to be a scary, unnerving experience anymore. Even novice turners with a bit of instruction (instructional video is supplied with the system), can easily remove several bowls from one blank. Get the most from your expensive burl or bowl blank, while not feeling exhausted at the end of the process. You will have lots of energy left to core more bowls or turn that piece you've been waiting to get your hands on for the last month.

WHAT DO I NEED?
The Easy-Core Coring System is comprised of two main parts:

  • Base Set
  • Knife Sets
Base Set

The Base Set needed is determined by the swing of the lathe. The swing is the distance from the middle of the spindle to the bed multiplied by two (i.e. a 2436 lathe has a 24" swing and therefore requires a 24" Base Set). Any size lathe from 16" to 26" swing (with flat bedways) can be accommodated with the Easy-Core Coring System. A Clamp Block (packaged separately) is included with the Base Unit. This will also vary from lathe to lathe. To determine the size of the Clamp Block needed, measure the distance between the bedways. This GAP determines the Clamp Block required.
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7722 16" Large Easy Core™ Coring Systems Base / 3203 $184.99
7723 20" Large Easy Core™ Coring Systems Base / 3207 $184.99
7724 24" Large Easy Core™ Coring Systems Base / 3211 $184.99
7729 Extra Cutter For the Easy Core™ Coring System / 3106 $35.99
 
Knife Set


The Knife Sets determine what size bowl blanks can be cored. There are four knife sets available for a complete system. These Knife Sets can be purchased separately. The Knives are made from quality materials to ensure they hold up to the task at hand. The support fingers for knife sets #1 & #2 are constructed using 60,000 lb tensile carbon steel, whereas the support fingers for knife sets #3 & #4 are made from 100,000 lb chrome nickel steel. Each Knife Set includes a knife, support, and cutter. Cutters are replaceable and easily sharpened on a bench grinder platform. The cutters are made from HSS CPM M4 - the same steel used to make our Mastercut Turning Tools - providing excellent cutter life.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7725 9" Knife Set for Easy Core System / 3199 $154.99
7726 11-1/2" Knife Set for Easy Core System / 3200 $164.99
7727 13-1/4" Knife Set for Easy Core System / 3201 $174.99
7728 16-1/4" Knife Set for Easy Core System / 3202 $194.99

OneWay
Cutter Sharpening Jig for Easy Core™ Coring Systems

Cutter Sharpening Jig for Easy Core™ Coring Systems

Looking for an easy way to sharpen your coring cutters? Look no further. We have created a little jig that allows you to easily recreate the grind on your Easy-Core™ cutters. It also acts as an applicator, meaning your meaning your fingers are further away from the grinder wheel. Simply remove the cutter from the knife, install it in the jig and follow the instructions provided. This nifty jig quickens the sharpening process ultimately saving you both time and money.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7730 Cutter Sharpening Jig / 3677 $23.99

OneWay
Clamp Blocks for Coring System

Clamp Blocks for Coring System

Oneway clamp blocks are used to mount the Oneway Spindle Steady, Bowl Steady & EasyCore system to your lathe. To determine the clamp block you need, measure the gap between the ways of your lathe. The bed width size for some common lathes are listed in the drop-down menu under Product Options above.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
7731 One Way 1-1/4" Clamp Block / 3154-125 $17.99
7732 One Way 1-1/2" Clamp Block / 3154-143 $17.99
7733 One Way 1-5/8" Clamp Block / 3154-156 $17.99
7734 One Way 1-3/4" Clamp Block / 3154-169 $17.99
7735 One Way 1-7/8" Clamp Block / 3154-181 $17.99
7736 One Way 2" Clamp Block / 3154-194 $17.99
7737 One Way 2-1/2" Clamp Block / 3154-244 $17.99
Follow Us...
www.ptreeusa.com is owned and operated as a marketing resource of Peachtree Woodworking Supply Inc. , Atlanta, GA