Call Toll Free 1-888-512-9069
Shopping Cart

Easy Wood
4" Easy Chucks

4" Easy Chucks
4" Easy Chucks 4" Easy Chucks 4" Easy Chucks 4" Easy Chucks
 
 
Watch Video

 

Zoom Ring - Finger-tip opening & closing

The Easy Chuck's Zoom Ring™ gives you the ability to open and close the chuck very quickly for various gripping diameter with your finger tips. Use the Zoom Ring™ to bring the jaws into position to lightly grab your project then use the supplied chuck key to do your final tightening

Easy Jaw System - Change out jaws in less than 30 seconds

The Easy Jaw™ System allows you to change from one set of jaws to the next in about 30 seconds. The patend pending Snap-Lock Technology uses no jaw screws or wrenches to exchange jaws. You simply use the supplied jaw key to depress a keeper latch in the jaw and slide each jaw right out. You then slide the next jaw type until you hear the snap sound. This get you back to turning quickly with the jaws you need to hang onto your project safely. The easiest chuck you'll ever use!

The Easy Tools Easy Chuck includes 1-3/8" Dovetail Jaws for gripping 1-3/8" tenons and features an overall expansion of 2". Accessory jaws, sold separately below, allow you to put the Easy Chuck through its paces with a variety of project applications – no more fasteners to worry with.

Features:

  • Snap-Lock Technology (SLT™)
  • Change jaws in 30 seconds or less
  • Jaws can be placed in any configuration, no longer sequential 
Item# Description Price Quantity
10769 1" - 8 tpi Easy Chuck C-1000 by Easy Wood Tools $399.99
10777 1-1/4" - 8 tpi Easy Chuck C-2000 by Easy Wood Tools $399.99
10778 M33 x 3.5 Easy Chuck C-3000 by Easy Wood Tools $399.99

Easy Wood
Easy Chuck Jaws

Easy Jaws - When you're ready to grip a different part of your project, you will need to change to a different shape jaw set in order to work safely and have the most fun.
Stock Dovetail Jaw - 1-3/8" Dovetail Jaw - 2-3/8" Easy Reach Dovetail Jaws - 1/2"
#10770 #10771 #10772
Grip:
(tenons)
1-3/8"
Expands: (recess) 2"
Jaw
Length:
7/16"

 

Grip:
(tenons)
2-3/8"
Expands: (recess) 3"
Jaw
Length:
7/16"
Grip:
(tenons)
1/2" Str.
Expands: (recess) 1-1/4"
Jaw
Length:
1-1/4"
Easy Reach Dovetail Jaws - 1-3/8"" Easy Reach Dovetail Jaws - 3-1/2" Easy Reach Dovetail Jaws - 3-1/2"
#10773 #10774 #10775
Grip:
(tenons)
1-3/8"
Expands: (recess) 2"
Jaw
Length:
1-1/4"
Grip:
(tenons)
3-1/2"
Expands: (recess) 4-1/4"
Jaw
Length:
1"
Grip:
(tenons)
2-1/2", 3",
& 3-1/2"
Expands: (recess) 4-1/2"
Jaw
Length:
1"
Item# Description Price Quantity
10770 Stock Dovetail Jaw - 1-3/8" $59.99
10771 Dovetail Jaw - 2-3/8" $69.99
10772 Easy Reach Dovetail Jaws - 1/2" $69.99
10773 Easy Reach Dovetail Jaws - 1-3/8" $69.99
10774 Easy Reach Dovetail Jaws - 3-1/2" $89.99
10775 Easy Reach Dovetail Jaws - 3-1/2" $89.99

Easy Wood
Big Easy Jaw

When working with hollow forms, bowls, or platters it can be quite cumbersum to work the base of your project with out damaging or marring the rim. With the Big Easy Jaw you can easily chuck your project with out fear of marring or marking your piece since it will rest against the urethane Grippers. The BIg Easy Jaw uses Snap Lock Technology which makes it easy to install on your Easy Chuck in about 30 seconds. The Big Big Easy Chuck is available in two sizes: 12" and 16" Big Easy Jaw Extensions's are available for use with the 16" Big Easy Chuck.

Features:

  • Soft Gripping on the rims of bowls, platters and hollow forms
  • Reverse chuck both small and large projects on lathes up to 20"
  • Urethane grippers will not mar or mark your project
  • Snap-Lock Technology to install on your Easy Chuck in about 30 seconds!
Item# Description Price Quantity
10786 12" Big Easy Jaws - CJ512 $129.99
10787 16" Big Easy Jaws - CJ516 $139.99
10788 20" Big Easy Jaws Extensions - CJ520 $69.99
10789 2" Easy Reach Urethane Gripper - 8 Pack $29.99

Easy Wood
Spindle Adapter
1-1/4" x 8 TPI to 1" x 8 TPI

Easy Wood Tools Spindle Adapter 

This Easy Spindle Adapter allows the use of the Easy Chuck on 1-1/4" spindles. Comes with wrench flats and spanner pin holes for easy tightening and removal. Double set screws allow you to run the lathe in reverse for sanding.

Features:

  • Easily adapts a 1-1/4" x 8 TPI to a 1" x 8 TPI spindle
  • Double set screws for reverse sanding
Item# Description Price Quantity
10776 Easy Wood Tools Spindle Adapter $39.99

Easy Wood
Anadized Aluminum Faceplates

  • Made from Anadized Aluminum so it will never rust
  • Set screws › Allow you to run lathe in reverse
  • Lasered hub › Quickly identify thread size
  • Larger screw holes › Allow for more holding power by using larger screws than other brand
  • Shorter overall length › Allows work to stay close to headstock bearings for less vibrations
  • 5/16" Spanner hole › Allows for easy removal
  • CNC machined › Precision quality
#10758
1" - 8 tpi x 2" Diameter #10759
1" - 8 tpi x 3" Diameter #10760
1" - 8 tpi x 4" Diameter
#10758
1" - 8 tpi x 2" Diameter
#10759
1" - 8 tpi x 3" Diameter
#10760
1" - 8 tpi x 4" Diameter
#10761
1-1/4" - 8 tpi x 2-1/2" Dia. #10762
1-1/4" - 8 tpi x 3-1/2" Dia. #10763
1-1/4" - 8 tpi x 4-1/2" Dia.
#10761
1-1/4" - 8 tpi x 2-1/2" Dia.
#10762
1-1/4" - 8 tpi x 3-1/2" Dia.
#10763
1-1/4" - 8 tpi x 4-1/2" Dia.

 

Item# Description Price Quantity
10758 1" - 8 tpi x 2" Diameter Faceplate $20.99
10759 1" - 8 tpi x 3" Diameter Faceplate $25.99
10760 1" - 8 tpi x 4" Diameter Faceplate $30.99
10761 1-1/4" - 8 tpi x 2-1/2" Diameter Faceplate $24.99
10762 1-1/4" - 8 tpi x 3-1/2"Diameter Faceplate $27.99
10763 1-1/4" - 8 tpi x 4-1/2"Diameter Faceplate $33.99

Follow Us...
www.ptreeusa.com is owned and operated as a marketing resource of Peachtree Woodworking Supply Inc. , Atlanta, GA