Made from heavy duty cloth backing our abrasive rolls are the perfect economical replacement sandpaper rolls for your Performax and Jet 16-32 and other machinery that accepts 3” wide rolls. These high performance aluminum oxide rolls are designed for all purpose sanding. The grain is resin bonded and have non-loading properties for extra long sanding life. MADE IN THE USA!
The rougher or lower grits like 60 grit can be used for abrasive planing and dimensioning. The medium grits like 80, 100 and 120 are typically can be used for lighter dimensioning projects and general surface prep. When using 150 grits and 220 grits we recommend using those higher grits for finishing passes only.
›See more product details
3" x 35' Cloth Abrasive Rolls
Made from heavy duty cloth backing our abrasive rolls are the perfect economical replacement sandpaper rolls for your Performax and Jet 16-32 and other machinery that accepts 3” wide rolls. These high performance aluminum oxide rolls are designed for all purpose sanding. The grain is resin bonded and have non-loading properties for extra long sanding life. MADE IN THE USA!
The rougher or lower grits like 60 grit can be used for abrasive planing and dimensioning. The medium grits like 80, 100 and 120 are typically can be used for lighter dimensioning projects and general surface prep. When using 150 grits and 220 grits we recommend using those higher grits for finishing passes only.
Replace your old, worn out paper
With these high quality, ready-to-cut and ready-to-wrap rolls, you'll be back up and running and producing professional level results in no time! Made from high quality materials right here in the United States so you know you're getting a high quality product with each abrasive roll!
Follow the Instructions above
Cutting the end for quick installation couldn't get much simpler. Simply follow the instructions above and you'll be ready to wrap your roll in no time at all...
Clip, Wrap and Clip!
Once the roll is cut and ready for install, simply clip in one end, wrap the roll around the drum and clip it into the other end. Make sure its tight with no loose areas and you're ready to "roll"!
The Standard is the Standard
These rolls work with the industry standard Performax, Jet 16-32 sanders.
High Grits for Finishing
Use the higher grits like 150 and 220 to finish projects like cutting boards and butcher blocks. Use the medium grits like 80 and 100 grits to help shape and plane wood when needed.
Low Grits for Smoothing, Planing and Reshaping
Use lower grits like 60 and 80 grit to help plane or reshape your stock pieces as you would like them to be.
The right amount of pressure you exert on your boards is absolutely critical. Too much and it will shorten the life of your abrasive roll, burn the material or cause problems with the motor on your machinery. To avoid too much pressure, with your machine turned off, place the material under the sanding drum, the raise or lower the drum so the drum contacts the material but can still be rotated by hand. Take the stock out with no more drum adjustment and proceed to sanding normally.
Straight feed? How about angling your stock feed through the drum instead. Angling the stock offers many advantages like less loading due to glue lines, better and more even wear and reduced motor loads. Just a slight angle provides you with more effective stock removal. Keep in mind that to achieve the best finish, the last two passes on the material should always be with the grain.
When sanding misshapen stock pieces you should always start sanding the piece with the crown side up. This helps prevent tipping or rocking when the piece is being fed through the sander. Once the down is gone, flip the stock over and sand the other side. As always, take extreme care and caution when sanding boards that are bowed, twisted or otherwise imperfect.
Features:
3" wide rolls x 35' long
Long lasting sandpaper
Ready to wrap for easy grit changes
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item#
Description
Each
2 Plus
4 Plus
Quantity
4
3" x 35' Cloth Back Abrasive Roll - 60 Grit
$29.99
$27.49
$24.99
5
3" x 35' Cloth Back Abrasive Roll - 80 Grit
$29.99
$27.49
$24.99
6
3" x 35' Cloth Back Abrasive Roll - 100 Grit
$29.99
$27.49
$24.99
7
3" x 35' Cloth Back Abrasive Roll - 120 Grit
$29.99
$27.49
$24.99
8
3" x 35' Cloth Back Abrasive Roll - 150 Grit
$29.99
$27.49
$24.99
9
3" x 35' Cloth Back Abrasive Roll - 220 Grit
$29.99
$27.49
$24.99
11589
Mini Abrasive Cleaning Eraser Stick (4" x 1-3/8" x 1-1/2")
$6.99
187
Small Abrasive Cleaning Eraser Stick (7-1/2" x 1-1/2" x 1-1/2")
$9.99
188
Large Abrasive Cleaning Eraser Stick (11-7/8" x 2" x 2")
$12.99
Clean, Restore, Rejuvenate...
Sanding most anything is a chore that we all don't typically care to do. To make things worse, the sandpaper seems to become useless just after a few strokes. What if you could rejuvenate your sandpaper so you could get a whole lot more mileage out of it? Now you can with our natural rubber cleaning eraser stick! Simply rub the stick across the abrasive surface and watch the dust, crud, resin and natural build up disappear!
It really works just like a pencil eraser! (only just for abrasive materials of course)
Designed to loosen and remove sawdust, dirt, debris and general build up from abrasive surfaces, the abrasive cleaning stick is going to be one of your most commonly used cleaning tools in your home workshop. It works almost like an old fashioned pencil eraser. As you rub or slide the stick across an abrasive surface the stick quickly loosens and removes foreign materials. Your abrasives will be brought back to life to continue sanding. If you have power sanders like belt sanders you can simply hold the stick up against the sanding belt while the power is on and watch the belt be cleaned right before your eyes!
Restore Sanding Belts
Large or small sanding belts? It doesn't matter. The eraser stick will help you clean and restore in seconds! The natural rubber cleaning eraser stick removes most all of the residue. Use stick after your sander has been clogged with wood dust and/or wood resin to return the sanding surface to a like-new condition; Pulls dust, wood particles, sap, metal shavings, paint, and other residue out of sanders and other abrasive materials.
Clean up those dirty skateboards...
Many skateboards typically have a grip tape or grip surface applied to the top surface to help keep your feet in place. This of course gets dirty rather quickly. Rinsing it off kinda works but doesn't get all of the build up. Our eraser stick does the trick and makes cleaning the board a breeze. The natural rubber cleaning eraser stick also works exceptionally well on skateboard grip surfaces which tend to get dirty rather quickly. Once clean, the skateboard surface is almost as good as new and keeps its grip a whole lot longer. Similar to skateboard grip surfaces, abrasive or grip tape that's used on floor areas that can get slippery can be easily cleaned using the eraser stick.
Perfect for Small Hand Sanding Accessories
These sticks work exceptionally well with hand sanding tools like sanding blocks, sponges, mouse shaped sanders and a whole lot more
Step Grip Tape and More!
Clean and restore most any type of abrasive, grip type surface
Works Great With Belt Sanders
Clean various items around the house, workshop or in the garage. The rubber construction of the stick works best on belt sanders to allow your belts to cut faster and last longer all the while it can also be used on disc sanders, drum sanders, rubber bottom shoes (not plastic), skateboard grip tape, grip tape and a whole lot more!
Available in Multiple Sizes
Mini Size
4" x 1-3/8" x 1-1/2"
Small Size
7-1/2" x 1-1/2" x 1-1/2"
Large Size
11-7/8" x 2" x 2"
Abrasive Cleaning Eraser Sticks
Sanding most anything is a chore that we all don't typically care to do. To make things worse, the sandpaper seems to become useless just after a few strokes. What if you could rejuvenate your sandpaper so you could get a whole lot more mileage out of it? Now you can with our natural rubber cleaning eraser stick! Simply rub the stick across the abrasive surface and watch the dust, crud, resin and natural build up disappear! The natural rubber cleaning eraser stick removes most all of the residue. Use stick after your sander has been clogged with wood dust and/or wood resin to return the sanding surface to a like-new condition
›See more product details
Features:
Pulls dust, wood particles, sap, metal shavings, paint, and other residue out of sanders and other abrasive materials
Also works exceptionally well on skateboard grip surfaces
Clean various items around the house, workshop or in the garage
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item#
Description
Price
Quantity
11589
Mini Abrasive Cleaning Eraser Stick (Stick Size: 4" x 1-3/8" x 1-1/2"
$6.99
187
Small Abrasive Cleaning Eraser Stick (Stick Size: 7-1/2" x 1-1/2" x 1-1/2")
$9.99
188
Large Abrasive Cleaning Eraser Stick (Stick Size: 11-7/8" x 2" x 2")
$12.99
4-1/2" x 10 Yard
Pressure Sensitive Adhesive Rolls
Mirka’s 41/2” wide, 10 yard long paper rolls with adhesive backing are perfect for finishing sanders that require 1/4 or 1/2 sheets of stick-on sandpaper. Simply tear the paper to the size of your sander. This makes no waste for quick and easy attachment.
Features:
Adhesive backing
Quick and easy attachment
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item#
Description
Price
Quantity
34
Mirka 4-1/2" x 10 YD Adhesive Rolls - 80 Grit
$17.99
35
Mirka 4-1/2" x 10 YD Adhesive Rolls - 100 Grit
$16.99
36
Mirka 4-1/2" x 10 YD Adhesive Rolls - 120 Grit
$16.99
37
Mirka 4-1/2" x 10 YD Adhesive Rolls - 150 Grit
$16.99
38
Mirka 4-1/2" x 10 YD Adhesive Rolls - 220 Grit
$16.99
39
Mirka 4-1/2" x 10 YD Adhesive Rolls - 320 Grit
$16.99
3" x 35' EX Rolls
Hook & Loop
The abrasive papers have zinc or calcium sterate, soft powdery soap interlaced with the grit. This lubricates the paper and the surface to make sanding easier. The stearate coating retards loading of the abrasive, so you can use it over and over again.
Features:
Hook & Loop backing for easy attachment and removal.
Zinc or calcium sterate, soft powdery soap interlaced with the grit
Stearate coating retards loading of the abrasive
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Cut to just the right length and cut at just the right angle the pre-cut cloth backed abrasive rolls make changing out your abrasive roll a lot easier. These abrasive rolls work with Performax, Jet, Super Max and many other drums sanders that require 3" wide rolls or wraps. The pre-cut rolls are cut to match your machine drum size. The rolls are made of an industrial grade aluminum oxide abrasive to give long life and produce a high quality finish.
Features:
Cut to match your machine drum size
Industrial grade aluminum oxide abrasive
Produces a high quality finish
Works with:
Performax
Jet
Super Max
Drum sanders that require 3" wide rolls
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
SAND-FLEE®
3" x 10 YD Premium Film Abrasive Rolls
Hook & Loop
This premium aluminum oxide abrasive is manufactured on a film substrate and has additional additives to enhance superior performance and reduce loading, which have not been found to contaminate water-based finishes.
›See more product details
SAND-FLEE®
3" x 10 YD Premium Film Abrasive Rolls - Hook & Loop
This premium aluminum oxide abrasive is manufactured on a film substrate and has additional additives to enhance superior performance and reduce loading, which have not been found to contaminate water-based finishes. There is some concern that stearate coating increases the chance for fisheye in water-based finishes, so this premium film abrasive is offered as non-stearated allowing you to use your SAND-FLEE® for your ideal finishing. Film abrasives are not impacted by moisture and heat like paper-backed abrasives. The consistency in the thickness of the base substrate with this film abrasive is also more consistent from one roll to another as well as one grit to another, making it a more desirable product to use on your SAND-FLEE®.
Sand Flee® rolls are offered with velour backing (hook and loop) for a very fast and easy application and removal.
Features
Premium aluminum oxide abrasive
Additional additives to enhance superior performance and reduce loading
Film abrasives are not impacted by moisture and heat like paper-backed abrasives
Features:
Premium aluminum oxide abrasive
Additional additives to enhance superior performance and reduce loading
Film abrasives are not impacted by moisture and heat like paper-backed abrasives
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item#
Description
Price
Quantity
4442
3" x 10 YD Premium Film Abrasive Roll - 80 Grit
$24.99
4443
3" x 10 YD Premium Film Abrasive Roll - 100 Grit
$24.99
4445
3" x 10 YD Premium Film Abrasive Roll - 150 Grit
$24.99
4446
3" x 10 YD Premium Film Abrasive Roll - 180 Grit
$24.99
4448
3" x 10 YD Premium Film Abrasive Roll - 320 Grit
$24.99
Turners Mesh
Each strip of Turners Mesh has tiny holes in it to allow the wood particles to pass through. This helps prevent clogging the abrasive surface which makes the strips perfect for sanding project on your lathe. The material is flexible so it easily conforms to the rounded shapes of spindles, vases, bowls and more.
Abrasive RollsAssortment 5 pack includes:
1 ea. 1" x 20'
Mesh Abrasive Roll -180X
1 ea. 1" x 20'
Mesh Abrasive Roll - 240X
1 ea. 1" x 20'
Mesh Abrasive Roll - 320X
1 ea. 1" x 20'
Mesh Abrasive Roll - 400X
1 ea. 1" x 20'
Mesh Abrasive Roll - 600X
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Steel Sandpaper Roll Dispenser with 5 Assorted 1" x 20' Cloth Abrasive Rolls
Keep your abrasive rolls organized and readily accessible! The Steel Sandpaper Roll Dispenser can be mounted to a wall or can be used free standing.
The dispenser is marked by grit for easy identification and quick sandpaper strip dispensing. Simply locate the grit you want and tear the strip to length using the built in steel tab. The Steel Sandpaper Roll Dispenser is designed to be used with 1"x20' Rolls. Please note that some brands of assortment refill rolls may vary slightly in size and may not fit perfectly.
›See more product details
Steel Sandpaper Roll Dispenser
with 5 Assorted 1" x 20' Cloth Abrasive Rolls
Keep your abrasive rolls organized and readily accessible! With this sandpaper roll assortment and steel dispenser, you'll never have to hunt for the exact grit! The Steel Sandpaper Roll Dispenser can be mounted to a wall or can be used free standing.
Features:
Keep your abrasive sandpaper rolls organized
Solid steel construction
Clearly marked slots for multiple grits
Perfect for dispensing just the right length for any project
Mounts to any wall or stud with wood screws (not included)
Includes:
1 ea. 150 grit 1" x 20' Cloth Roll
1 ea. 240 grit 1" x 20' Cloth Roll
1 ea. 320 grit 1" x 20' Cloth Roll
1 ea. 400 grit 1" x 20' Cloth Roll
1 ea. 600 grit 1" x 20' Cloth Roll
1 ea. Steel Dispenser
Marked by grit for easy identification
The dispenser is marked by grit for easy identification and quick sandpaper strip dispensing. Simply locate the grit you want and tear the strip to length using the built in steel tab.
Mounted or free standing
The Steel Sandpaper Roll Dispenser can be mounted to a wall or can be used free standing.
Ideal for wood turners
The rolls are 1" by 20 feet long. The narrow strips make them ideal for wood turners and anywhere when detailing is needed. Perfect for working in tight spaces and can be wrapped around objects as well.
1"x20' Rolls
The Steel Sandpaper Roll Dispenser is designed to be used with 1"x20' Rolls. Please note that some brands of assortment refill rolls may vary slightly in size and may not fit perfectly.
Features:
Keeps abrasive sandpaper rolls organized
Solid steel construction
Clearly marked slots for multiple grits
Perfect for dispensing just the right length
Mounts to any wall or stud with wood screws (not included)
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item#
Description
Price
Quantity
6217
Steel Sandpaper Roll Dispenser
with 5 Assorted 1" x 20' Cloth Abrasive Rolls
$34.99
Item#
Description
Price
Quantity
7056
1" x 20' Cloth Roll Refill 150 Grit - 1 each
$4.99
7057
1" x 20' Cloth Roll Refill 240 Grit - 1 each
$4.99
7058
1" x 20' Cloth Roll Refill 320 Grit - 1 each
$4.99
7059
1" x 20' Cloth Roll Refill 400 Grit - 1 each
$4.99
7060
1" x 20' Cloth Roll Refill 600 Grit - 1 each
$4.99
Steel Sandpaper Roll Dispenser with 5 Assorted 1" x 20' Mesh Abrasive Rolls
Keep your abrasive rolls organized and readily accessible! The Steel Sandpaper Roll Dispenser can be mounted to a wall or can be used free standing.
The dispenser is marked by grit for easy identification and quick sandpaper strip dispensing. Simply locate the grit you want and tear the strip to length using the built in steel tab. The Steel Sandpaper Roll Dispenser is designed to be used with 1"x20' Rolls. Please note that some brands of assortment refill rolls may vary slightly in size and may not fit perfectly.
›See more product details
Steel Sandpaper Roll Dispenser
with 5 Assorted 1" x 20' Mesh Abrasive Rolls
Keep your abrasive rolls organized and readily accessible! With this sandpaper roll assortment and steel dispenser, you'll never have to hunt for the exact grit! The Steel Sandpaper Roll Dispenser can be mounted to a wall or can be used free standing.
The 1" x 20' Mesh Rolls are Conveniently packaged in a dispenser box to make choosing just the right length strip quick and easy. Perfect for turning, sanding spindles, pens, detail work, small projects and much more. The strips are easily wrapped around objects for better detail work or for more aggressive sanding. Each strip of Turners Mesh has tiny holes in it to allow the wood particles to pass through. This helps prevent clogging the abrasive surface which makes the strips perfect for sanding project on your lathe. The material is flexible, so it easily conforms to the rounded shapes of spindles, vases, bowls and more.
Features:
Keep your abrasive sandpaper rolls organized
Solid steel construction
Clearly marked slots for multiple grits
Perfect for dispensing just the right length for any project
Mounts to any wall or stud with wood screws (not included)
Includes:
1 ea. 150 grit 1" x 20' roll
1 ea. 240 grit 1" x 20' roll
1 ea. 320 grit 1" x 20' roll
1 ea. 400 grit 1" x 20' roll
1 ea. 600 grit 1" x 20' roll
1 ea. Steel Dispencer
Marked by grit for easy identification
The dispenser is marked by grit for easy identification and quick sandpaper strip dispensing. Simply locate the grit you want and tear the strip to length using the built in steel tab.
Mounted or free standing
The Steel Sandpaper Roll Dispenser can be mounted to a wall or can be used free standing.
Features:
Keep your abrasive sandpaper rolls organized
Solid steel construction
Clearly marked slots for multiple grits
Perfect for dispensing just the right length for any project
Mounts to any wall or stud with wood screws (not included)
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item#
Description
Price
Quantity
6218
Steel Sandpaper Roll Dispenser
with 5 Assorted 1" x 20' Mesh Abrasive Rolls
$39.99
Item#
Description
Price
Quantity
4409
1" x 20' Mesh Abrasive Roll 180 Grit - 1 each
$5.99
4410
1" x 20' Mesh Abrasive Roll 240 Grit - 1 each
$5.99
4411
1" x 20' Mesh Abrasive Roll 320 Grit - 1 each
$5.99
4412
1" x 20' Mesh Abrasive Roll 400 Grit - 1 each
$5.99
4413
1" x 20' Mesh Abrasive Roll 600 Grit - 1 each
$5.99
Steel Sandpaper Roll Dispenser Holds Five 1" x 20' AbrasiveRolls
Made from heavy duty galvanized steel, the steel sandpaper roll dispenser makes organizing your rolls a snap. Simply pull of the end tabs, pull the tube out until it gets close to the end and then slide on your rolls one by one until all 5 slots are full.
The dispenser is designed for abrasive sandpaper rolls with center openings (to fit on to the tube) of at least 1-1/2 inches.
With this dispenser you will be able to keep your abrasive rolls organized and readily accessible at a moments notice. It can be mounted to a wall or directly on to a workbench.
›See more product details
Steel Sandpaper Roll Dispenser
Holds Five 1" x 20' Abrasive Rolls
Made from heavy duty galvanized steel, the steel sandpaper roll dispenser makes organizing your rolls a snap. Simply pull of the end tabs, pull the tube out until it gets close to the end and then slide on your rolls one by one until all 5 slots are full.
The dispenser is designed for abrasive sandpaper rolls with center openings (to fit on to the tube) of at least 1-1/2 inches. Each slot is slightly over 1" wide to fit most standard size sandpaper rolls.
Keep It Together! (Your Sandpaper Rolls That Is)
With this dispenser you will be able to keep your abrasive rolls organized and readily accessible at a moments notice. It can be mounted to a wall or directly on to a workbench.
The indispensable dispenser
You can even use free standing if you so choose. The dispenser is marked by grit for easy identification and quick sandpaper strip dispensing. Simply locate the grit you want and tear the strip to length using the built in steel tab.
The Steel Sandpaper Roll Dispenser is designed to be used with 1"x20' Rolls (not included). Please note that some brands of assortment rolls may vary slightly in size and may not fit perfectly. No sandpaper Rolls are included with this dispenser.
Features:
Keep your abrasive sandpaper rolls organized
Solid steel construction
Clearly marked slots for multiple grits
Perfect for dispensing just the right length for any project
Mounts to any wall or stud with wood screws (not included)
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item#
Description
Price
Quantity
6216
Steel Sandpaper Roll Dispenser
Holds Five 1" x 20' Abrasive Rolls
$19.99
1" x 20' Cloth Replacement Rolls
Item#
Description
Price
Quantity
7056
1" x 20' Cloth Roll Refill 150 Grit - 1 each
$4.99
7057
1" x 20' Cloth Roll Refill 240 Grit - 1 each
$4.99
7058
1" x 20' Cloth Roll Refill 320 Grit - 1 each
$4.99
7059
1" x 20' Cloth Roll Refill 400 Grit - 1 each
$4.99
7060
1" x 20' Cloth Roll Refill 600 Grit - 1 each
$4.99
1" x 20' Mesh Replacement Rolls
Item#
Description
Price
Quantity
4409
1" x 20' Mesh Abrasive Roll 180 Grit - 1 each
$5.99
4410
1" x 20' Mesh Abrasive Roll 240 Grit - 1 each
$5.99
4411
1" x 20' Mesh Abrasive Roll 320 Grit - 1 each
$5.99
4412
1" x 20' Mesh Abrasive Roll 400 Grit - 1 each
$5.99
4413
1" x 20' Mesh Abrasive Roll 600 Grit - 1 each
$5.99
1-1/2" x 10 Yard Abrasive Cloth Rolls
Available in 6 different grits, these abrasive cloth rolls make sanding your turning project a breeze. Whether using a strip on a project running on the lathe or a work piece secured in a vise the abrasive rolls make the job easier. Each grit comes in it's own convenient dispenser box for easy identification and storage.
Features:
Perfect for working in tight spaces and can be wrapped around objects as well for more aggressive sanding.
The rolls are 1-1/2" x 10 yards long.
Available in 6 different grits: 120, 150, 240, 320, 400 and 600 Grill Rolls
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item#
Description
Price
Quantity
4187
1-1/2" x 10 Yard Abrasive Cloth Rolls - 120 Grit
$8.99
4188
1-1/2" x 10 Yard Abrasive Cloth Rolls - 150 Grit
$8.99
4189
1-1/2" x 10 Yard Abrasive Cloth Rolls - 240 Grit
$8.99
4190
1-1/2" x 10 Yard Abrasive Cloth Rolls - 320 Grit
$8.99
4191
1-1/2" x 10 Yard Abrasive Cloth Rolls - 400 Grit
$8.99
4192
1-1/2" x 10 Yard Abrasive Cloth Rolls - 600 Grit
$8.99
Woodturner's Sandpaper Rolls
1" x 20' Rolls of sandpaper Convenient packaged in a dispenser box to make choosing just the right amount od sandpaper quick and easy. This makes it perfect for sanding spindles, pens or anything small strips of sand paper are needed. The strips are made from aluminum oxide.
›See more product details
Woodturner's Sandpaper Rolls
1" x 20' Rolls of sandpaper Convenient packaged in a dispenser box to make choosing just the right amount od sandpaper quick and easy. This makes it perfect for sanding spindles, pens or anything small strips of sand paper are needed. The strips are made from aluminum oxide. Each roll is made from hard to find J-weight cloth backed sandpaper. Available in 150x, 240x, 320x, 400x, & 600x. The center opening of each roll is approximately 1-1/2".
Woodturner's Assorted Roll Pack Features:
Convenient packaged in a dispenser box
The strips are made from aluminum oxide
Each roll is made from hard to find J-weight cloth backed sandpaper.
The center opening of each roll is approximately 1-1/2".
Woodturner's Assorted Roll Pack Includes:
1ea. 1" x 20' roll 150 Grit
1ea. 1" x 20' roll 240 Grit
1ea. 1" x 20' roll 320 Grit
1ea. 1" x 20' roll 400 Grit
1ea. 1" x 20' roll 600 Grit
Dispenser
Great for Sanding Smaller Objects
Sometimes when we are sanding smaller objects, we need, well, a smaller piece or just a strip of sandpaper. We could always cut one of our expensive 9" x 11" sheets and hopefully not cut too much off.
Tear Just the Right Amount for Your Project
Reach for the correct grit inside the box dispenser and tear off just the right amount for your project. Each grit roll is 1" wide and is flexible enough to be used on most any shape. These abrasive strips work exceptionally well on rounded objects such as turned pens, bottle stoppers or any other smaller type of turning.
Easy to Identify Grits
Stepping your abrasives from low grit to high grit is an essential process for finishing your pens, pencils, bottle stoppers or any wood project in the proper manner. They also work on most any type of material and can be cut to any length needed.
Features:
Convenient packaged in a dispenser box
The strips are made from aluminum oxide
Each roll is made from hard to find J-weight cloth backed sandpaper.
The center opening of each roll is approximately 1-1/2".
Includes:
1ea. 1" x 20' roll 150 Grit
1ea. 1" x 20' roll 240 Grit
1ea. 1" x 20' roll 320 Grit
1ea. 1" x 20' roll 400 Grit
1ea. 1" x 20' roll 600 Grit
California Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.