Bandsaw & Accessories

LED Dual Power / Dual Mount Shop Light

This LED Work Light has dual power - 110V (included) or 2 each AAA batteries (not included) , magnetic base will firmly attach to any ferrous metal surface, plus the LED Work Light can be clamped to other work surfaces with the supplied C-Clamp Holder ( 2-1/2" maximum clamp opening) When use with 2 each AAA batteries (not included) this LED Work Light makes a great emergency light for your car or truck and easily fits in most glove boxes.

Features:

• 110V Power Cord with transformer included
• Also runs on 2 each AAA batteries (not included)
• Magnetic Base can be used with included Table-Clamp Holder
• 2-1/2" maximum clamp opening
• Makes a great emergency light for your car or truck and easily fits in most glove boxes.

Super Nova Bright LED Machine Lamp

This is a serious shop lamp. Good lighting is one of the most under-appreciated assets for fine woodworking, especially handwork at the bench. It is a shame to see an elaborately equipped shop with nothing more than fluorescent ceiling lights illuminating the workbench. Basically, the properties of lighting are intensity, distance from source to the object, angle of incidence, and quality, which includes the color cast (color temperature). The Super Nova Lamp from Woodturners Wonders delivers big time on all counts. Developed by woodturner – inventive guy Ken Rizza for use with a lathe, but this lamp is just as useful for general woodworking. The three LEDs in the lamp head together use 9 watts of power to generate 870 lumens.
›See more product details

×

Super Nova Bright LED Machine Lamp

This is a serious shop lamp. Good lighting is one of the most under-appreciated assets for fine woodworking, especially handwork at the bench. It is a shame to see an elaborately equipped shop with nothing more than fluorescent ceiling lights illuminating the workbench.

Super Nova Bright LED Machine Lamp Features

• Magnetic base has over 200 lbs of breakaway force
• 9 watts generate over 870 lumens of white light
• Excellent for finding fine sanding scratches
• 30-inch long, stainless steel flexible neck
• Black shroud over flex pipe eliminates glare
• Nine-foot electrical cord
• Three 3 watt hard wired bulbs project at 90 degrees
• Push button switch on lamp head 9. 50,000 hour bulbs

This is a Serious Shop Lamp

Basically, the properties of lighting are intensity, distance from source to the object, angle of incidence, and quality, which includes the color cast (color temperature). The Super Nova Lamp from Woodturners Wonders delivers big time on all counts. Developed by woodturner – inventive guy Ken Rizza for use with a lathe, but this lamp is just as useful for general woodworking. The three LEDs in the lamp head together use 9 watts of power to generate 870 lumens.

Heavy-Duty Construction

This is a heavy-duty lamp. The 30" flexible stainless steel neck, covered with a black flexible, non-reflective shroud, holds its adjustment in any position. This is the key to the effectiveness of a lamp like this – the light can be adjusted to the exact location and direction desired and it stays put.

286 Pounds of Force!

The heavy rectangular base houses a switchable magnet that holds with 286 pounds of force! The base is large enough to easily accommodate a clamp to secure it to a wooden surface. The base holds unyieldingly to 2mm sheet steel bandsaw cover, while the neck does not sag a bit when fully extended. Wow!

Close

Features:

• Magnetic base has over 200 lbs of breakaway force
• 9 watts generate over 870 lumens
• Excellent for finding fine sanding scratches
• 30-inch long, stainless steel flexible neck
• Black shroud over flex pipe eliminates glare
• Nine-foot electrical cord
• Three 3 watt hard wired bulbs project at 90°
• Push button switch on lamp head 9. 50,000 hour bulbs

Aurora Woodturner's Magnetic Base
LED Light

This High intensity Lamp was made to Wood Turners Specifications. It was well thought out and there is no better at any cost.

Features:

• Switchable magnetic base has 110 lbs of pull and won't vibrate loose while turning.
• Heavy-duty flexible neck is approximately 30-1/2" from end-to-end and allows you to position light right where you need it.
• Curved base plate allows you to mount on top of tailstock.
• Thick plastic lens protects light from chips and debris.
• Aluminum heat sink cap keeps light cool to the touch
• Neutral white light with 170 lumens and 60 degree angle.
• 170 Lumen bulb
• 50,000 Hour LED bulb
• 9' Electrical cord

PERFECT FOR MOST ANY SHOP MACHINE

LED Magnifying Work Light
w/Dual Power and Dual Mount

This LED Work Light with 4" diameter 3x magnifying lens has all the bells and whistles, dual power - 110V (included) or 2 each AAA batteries (not included), magnetic base will firmly attach to any ferrous metal surface, plus the LED Work Light can be clamped to other work surfaces with the supplied Table-Clamp Holder (2-1/2" maximum clamp opening).
›See more product details

×

LED Magnifying Work Light w/Dual Power and Dual Mount

This LED Work Light with 4" diameter 3x magnifying lens has all the bells and whistles, dual power - 110V (included) or 2 each AAA batteries (not included), magnetic base will firmly attach to any ferrous metal surface, plus the LED Work Light can be clamped to other work surfaces with the supplied Table-Clamp Holder (2-1/2" maximum clamp opening). The steel flat top of Table Clamp Holder allows for quick magnetic attachment to the Table Clamp Holder and also doubles as a easy way to store the LED Work Light attached to a shelf or other surface.

Features

• 110VPower Cord with transformer included.
• Can run on 2 AAA batteries (not included)
• Magnetic Base can be used with included Table-Clamp Holder
• Lighted 3x magnifying lens
• Non-Ferrous Metal - Mount to your work bench or other non_ferrous table tops using the (Included Table-Clamp).
  
• Ferrous Metals - Magnetic base attaches firmly to any ferrous metal surface.

Close

Features:

• 110VPower Cord with transformer included.
• Can run on 2 AAA batteries (not included)
• Magnetic Base can be used with included Table-Clamp Holder
• Lighted 3x magnifying lens
• Non-Ferrous Metal - Mount to your work bench or other non_ferrous table tops using the (Included Table-Clamp).
  
• Ferrous Metals - Magnetic base attaches firmly to any ferrous metal surface.

T-Slot Plates for Magnetic Led Lights

Add Instant Light Anywhere 
If You Have 1/4" or 3/8" T-Track

Have you ever needed just a little more light over your router bit, or even your tablesaw blade, but you have no way of securing a light to your fence? Now you can with our easy to install T-track plates for our Magnetic LED lights (not included). Simply mount the plate to the top of your track on your fence (with a track or t-slot installed), then your are able to place the Magnetic LED Light (not included) directly onto the plate and adjust the position of plate and light accordingly. The light can easily be removed when it is not in use or not needed. The plates are available in two different sizes according to your specific Track or T-slot size.