Bandsaws & Accessories

Super Wide Miter Guide
ADD-ON Track

For Use with the Super Wide Miter Guide

Add even more length to your Super Wide Miter Guide for extra long stock. The 36" ADD-ON Track easily attaches to the miter guide with two attachment brackets (included) that slide into your bottom track and is secured with multiple set screws. Now your ready to make cuts on the extra long workpieces without any concern of falling off the back end of your table. When the ADD-On Track is added to the Super Wide Miter Guide it gives you a combined length of 72"

Features:

• For Use with the Super Wide Miter Guide
• Easily attaches to the miter guide with two attachment brackets
• Make cuts on the extra long workpieces without any concern of falling off the back end of your table

Includes:

• 1 ea. ea. 36" Super Wide Miter Guide
• 2 ea. Attachment Brackets with Set Screws

Note: Bandsaw Not Included

Precision Band Saw Fence

Bolster your band saw’s accuracy with a precision Band saw Fence from Kreg. This fence is adjustable in two dimensions, and sets parallel to the blade with ease. A precision lens cursor reads off the included scale and enhances cutting accuracy and repeatability for high production work. The fence mounts to most 14-inch band saws, including Jet, Delta, General, Grizzly and many others.

Features:

• Precision lens cursor for pinpoint accuracy
• Incredibly strong and rigid for optimal durability and tighter work pieces
• Easy to attach and remove for less downtime and more productivity
• Adjustable in two dimensions for setting parallel with the blade
• Fits most 14-inch band saws for versatility

4-1/2" Resaw Guide

The Kreg Resaw Guide easily attaches to the Kreg Precision Band Saw Fence, allowing for a higher level of control and accuracy when adjusting for band-saw blade drift. The curved face of the guide helps you steer the board into the cut and get the perfect results you're looking for.

Features:

• Durable anodized-aluminum
• Actively compensates for blade drift
• Attaches to Kreg Precision Band Saw Fence
• Curved guide face helps steer board into cut
• For small- and medium-sized work pieces
• 4 1/2" height for small and medium-size workpieces

Compatibility:

• Precision Band Saw Fence

Includes:

• 1 ea. Kreg® 4-1/2" Resaw Guide
• Owner's Manual

Micro Adjuster

Dial-in precise adjustments to your Kreg Precision Router Table or Precision Band Saw Fence – down to .005" – with the simple turn of a thumb wheel.

Features:

• Provides precise adjustments, down to .005"
• Easy to adjust with the simple turn of a thumb wheel
• For use with Kreg Precision Router Table and Precision Band Saw Fence
• Anodized aluminum and brass construction

Compatibility:

• Precision Band Saw Fence

Includes:

• 1 ea. Kreg® Micro -Adjuster
• Owner's Manual

Magfence II
Universal Magnetic Fence

The MAGFENCE II™ Universal Magnetic Fence is the fastest, easiest way to add a moveable and adjustable fence to your bandsaw. Since the MAGFENCE II™ attaches to your saw with switchable magnets ( 155 lbs of break away force each), it is readily adjusted and infinitely positionable.
›See more product details

×

Magfence II Universal Magnetic Fence

The MAGFENCE II™ Universal Magnetic Fence is the fastest, easiest way to add a moveable and adjustable fence to your bandsaw. Since the MAGFENCE II™ attaches to your saw with switchable magnets ( 155 lbs of break away force each), it is readily adjusted and infinitely positionable. You don't even need any hardware or mounts when installing. Simply place in position and switch the magnets to the ON position and you are set. The fence has thin rubber strips on the bottom to make adjustments smooth and simple, they also keep the fence from scratching your table top surface. The unit also features multiple T-slots for attaching any number of accessories like a sub-fence, stops and is compatible with all of Carter's original MAGFENCE™ accessories. The MAGFENCE II™ comes with two switchable magnets ( 155 lbs of break away force each) and measures 15" in length by 3" in height. Additional switchable magnets (sold separately) can be added to the fence for even more holding power

Features

• Fastest, easiest way to add a moveable and adjustable fence to your bandsaw
• Attaches to your saw with switchable magnets
• Readily adjusted and infinitely positionable
• No hardware or mounts needed when installing
• Thin rubber strips on the bottom to make adjustments smooth and simple
• Multiple T-slots for attaching any number of accessories
• Compatible with all of Carter's original MAGFENCE™ accessories

Close

Features:

• Fastest, easiest way to add a moveable and adjustable fence to your bandsaw
• Attaches to your saw with switchable magnets
• Readily adjusted and infinitely positionable
• No hardware or mounts needed for installing
• Thin rubber strips on the bottom to make adjustments smooth and simple
• Multiple T-slots for attaching accessories
• Compatible with all of Carter's original MAGFENCE™ accessories

5" Sacrificial Fence for Magfence II

The 5" SWF allows you to get the blade much closer to the fence without the fear of damaging your blade or your fence. This extended design gives you a taller face for resaw and larger wood operations. The face attaches easily at both ends via the existing slots in the MAGFENCE® II face. The SWF is constructed out of ridgid non-warping plastic that will keep it's shape, but will not damage the blade in case of accidental contact. Ideal for sawing super thin veneers or any application where the fence might come in contact with the tooling or blade.

Note:The SWF is designed to fit the Carter MAGFENCE® II product only ( Not Included).

Note: 5" SWF Sacrificial Fence Only Carter MAGFENCE II Not Included

MagJig 95

The Ultimate Workholding Clamp. Nothing else like it – ever! 95 pounds of holding force in a simple 180° turn of a knob! Unmatched speed strength and precision in clamping, Magswitch MagJig Magnetic clamps have revolutionized table top workholding. Features fast, strong set up anywhere on a steel or cast iron table or fence.
›See more product details

×

MagJig 95

The Ultimate Workholding Clamp. Nothing else like it – ever! 95 pounds of holding force in a simple 180° turn of a knob! Unmatched speed strength and precision in clamping, Magswitch MagJig Magnetic clamps have revolutionized table top workholding. Features fast, strong set up anywhere on a steel or cast iron table or fence. Not limited by the miter slot or table edge. Use in your custom jigs and fixtures by drilling a 30mm hole using a Forstner bit into standard 3/4” stock. Drill as many holes as you want for as much strength and flexibility as you need by simply dropping in MagJigs. Also for use with the Magswitch Workholding System as it fits in our Universal Mounting Base. We recommend use of two per fixture to avoid pivot.

Features

• Fast Setup & Securing
• Uses standard 3/4" material
• Strong Hold! Strong against shear force.
• Easy On/Off - rotate 1/2 turn On - reverse & turn off
• Use in multiple Jigs, switch in and out of fixtures with ease.
• Ideal for jig placement flexibilit
• Uses Standard 30 mm Forstner drill bit for mounting
• Up to 95 lbs of break away force

Close

Features:

• Fast Setup & Securing
• Uses standard 3/4" material
• Strong Hold! Strong against shear force.
• Easy On/Of
• Ideal for jig placement flexibilit
• Uses Standard 30 mm Forstner drill bit for mounting
• Up to 95 lbs of break away force

Note: Do not use for lifting

MagJig 150

The Ultimate Workholding Clamp. Nothing else like it – ever! 150 pounds of holding force in a simple 180° turn of a knob! Unmatched speed strength and precision in clamping, Magswitch MagJig Magnetic clamps have revolutionized table top workholding.
›See more product details

×

MagJig 150

The Ultimate Workholding Clamp. Nothing else like it – ever! 150 pounds of holding force in a simple 180° turn of a knob! Unmatched speed strength and precision in clamping, Magswitch MagJig Magnetic clamps have revolutionized table top workholding. Features fast, strong set up anywhere on a steel or cast iron table or fence. Not limited by the miter slot or table edge. Use in your custom jigs and fixtures by drilling a 40mm hole using a Forstner bit into standard 3/4” stock. Drill as many holes as you want for as much strength and flexibility as you need by simply dropping in MagJigs. Also for use with the Magswitch Workholding System as it fits in our Universal Mounting Base. We recommend use of two per fixture to avoid pivot.

Features

• Fast Setup & Securing
• Uses standard 3/4" material Strong Hold!
• Strong against shear force.
• Easy On/Off - rotate 1/2 turn On - reverse & turn off
• Use in multiple Jigs, switch in and out of fixtures with ease.
• Ideal for jig placement flexibilit
• Uses Standard 40 mm Forstner drill bit for mounting
• Up to 155 lbs of break away force

Close

Features:

• Fast Setup & Securing
• Uses standard 3/4" material Strong Hold!
• Strong against shear force.
• Easy On/Off
• Ideal for jig placement flexibilit
• Uses Standard 40 mm Forstner drill bit for mounting
• Up to 155 lbs of break away force

Note: Do not use for lifting

F.A.S.T Fence Alignment System Tool
5 Setup Bars

F.A.S.T
The F.A.S.T is a new take on an old idea. Designed to give you a quick pre set height or thickness gauge for all of your projects. We added a ruler on the front and a rare earth magnet on the back to hold the F.A.S.T in place
›See more product details

×

F.A.S.T Fence Alignment System Tool

5 Setup Bars

The F.A.S.T is a new take on an old idea. Designed to give you a quick pre set height or thickness gauge for all of your projects. We added a ruler on the front and a rare earth magnet on the back to hold the F.A.S.T in place during set up. The F.A.S.T is made from aluminum and will not damage the teeth of your table saw, bandsaw blade or router bits.

Bandsaw Fence Alignment

For checking alignment, place any F.A.S.T on your band saw blade with the teeth of the blade in the machined groove against the rare earth magnet and adjust your fence so it lines up parallel to the F.A.S.T Bar.

Bandsaw Cut Width

To set for cut width, choose the bar that corresponds to your desired cut width and place on the blade as mentioned above. Gently slide your fence against F.A.S.T Bar and lock your fence in place then remove the F.A.S.T and make the cut.

Also Works with Router Tables, Table Saw and More

Place a F.A.S.T Bar that corresponds to your desired height for setting up your cutters. Simply raise or lower your cutter until it is flush with the top of the F.A.S.T Bar. Works great for a F.A.S.T setting between your table saw fence and blade as well.

Includes:

• 1/8" F.A.S.T Setup Bar
• 3/16" F.A.S.T Setup Bar
• 1/4" F.A.S.T Setup Bar
• 3/8" F.A.S.T Setup Bar
• 1/2" F.A.S.T Setup Bar

Close

Features:

• Ruler on the front
• Made from aluminum
• Will not damage the teeth of your table saw, bandsaw blade or router bits.

Includes:

• 1/8" F.A.S.T Setup Bar
• 3/16" F.A.S.T Setup Bar
• 1/4" F.A.S.T Setup Bar
• 3/8" F.A.S.T Setup Bar
• 1/2" F.A.S.T Setup Bar