Clamps & Accessories

Parallel Bar Clamps

Our parallel-jaw bar clamps are for quick, accurate clamping of panels, cabinet drawers and frameworks. The end stop on the steel bar helps stabilize the clamp during use and detaches to reverse the screw jaw for spreading purposes. The comfortable screw handle is super durable compound material.

Features:

• The end stop on the steel bar helps stabilize the clamp during use
• The end stop also detaches to reverse the screw jaw for spreading purposes.
• The comfortable screw handle is super durable compound material.

*Shipping Note: May require additional shipping charges due to being over sized for this item.

Parallel Bar Clamps

Upgrade your workbench clamps and get the largest clamping surface in the industry!
›See more product details

×

Parallel Bar Clamps

Upgrade your workbench clamps and get the largest clamping surface in the industry! Exclusive Design (patent pending) Provides precision and power with exact 90 degree clamping at up to 1,000 lbs. pressure

Features

• Precision-Rule™ Measurement System (patent pending) Provides a consistent setup and quick identification of opening capacity
• Slide-Glide Trigger (patent pending) Makes precise adjustments rapidly
• Ergonomic SUMOGRIP™ Handle Integrated with soft grip for added comfort and increased power
• Moveable Rail Stand/End Stop Helps preset clamping capacity rapidly and accurately
• Non-marring Composite Resin Jaw Faces Glue Resistant in design, ensure even clamping pressure
• Reversible Clamping Movable jaw can easily reverse to be used as a spreader
• Extended Side Profile Allows narrow clamping on the side of the jaw face
• Acme Thread Turns easy without binding

Close

Features:

• Exclusive Design (patent pending) Provides precision and power with exact 90 degree clamping at up to 1,000 lbs. pressure
• Slide-Glide Trigger (patent pending) Makes precise adjustments rapidly
• Moveable Rail Stand/End Stop Helps preset clamping capacity rapidly and accurately
• Extended Side Profile Allows narrow clamping on the side of the jaw face
• Acme Thread Turns easy without binding

*Shipping Note: May require additional shipping charges due to being over sized for this item.

Cross Doc™ Framing Blocks

Designed to hold two pairs of clamps 90-degrees to each other, the Cross Doc™ Framing Blocks make a once clumsy job simple. Each block has two grooves sized to fit the JET Parallel Jaw Clamp bars but at two different heights. That makes it possible to apply clamping pressure to the ends and sides of the project at the same time. They also allow setting the clamps up perfectly square before gluing the assembly up. Nothing is more aggravating than having a slightly crooked clamp push an assembly out of square. Each Cross Doc™ Framing Block has holes for screws at the corners for attaching them to a board. They also have a threaded metal insert in the bottom for use with the JET Bench Dogs (Sold Separately).

UniKlamp

A new mini version of the popular K Body Clamp. The UniKlamp offers up 11 square inches of jaw surface: clamps flat, round or odd shapes; jaws encased in glue resistant, non-marring polyamide; profiled rail minimizes flexing and bending; Acme thread for smooth action and long life. Jaws reverse to use clamp as a spreader. 550 pounds of pressure. Available in 6" opening size.

Features:

• Offers up 11 square inches of jaw surface
• Clamps flat, round or odd shapes
• Jaws encased in glue resistant, non-marring polyamide
• Profiled rail minimizes flexing and bending
• Acme thread for smooth action and long life. Clamps exert 550 pounds of pressure. Available in 6" opening size.
• Jaws reverse to use clamp as a spreader.

Clamping Pressure: 550 lbs

K-Body® Revo™ Jr. Clamps

The BESSEY® K Body® Jr. is a new, mid-sized version of what made the full-sized REVO parallel clamp so great. With up to 900 lbs of clamping force, the REVO™ can handle almost any precision clamping task and much, much more. Clamps are of High-end quality with a mid-size price.
›See more product details

×

K-Body® Revo™ Jr. Clamps

The BESSEY® K Body® Jr. is a new, mid-sized version of what made the full-sized REVO parallel clamp so great. With up to 900 lbs of clamping force, the REVO™ can handle almost any precision clamping task and much, much more. 90 degree jaws make cabinet work, frame ups, drawers, panel glue-ups and any other right angle glue-up a much easier and smoother operating task. Despite its 900 lb rating; this clamp is easily 30-40% lighter than all other parallel clamps claiming a rating of 900-1100 lbs. Lighter weight means less operator exertion, less user fatigue and greater productivity. German engineering, German steel, assembled in USA facilities. The K-body Revo Jr. Clamps are of High-end quality with a mid-size price.

Features

• Up to 900 lbs of clamping force
• 30-40% lighter than all other parallel clamps claiming a rating of 900-1100 lbs
• Less operator exertion, less user fatigue and greater productivity
• German steel & German engineering
• Assembled in USA facilities
• High-end quality with a mid-size price

Close

Features:

• German steel & German engineering
• Assembled in USA facilities
• High-end quality with a mid-size price

Clamping Pressure: 900 lbs

*Shipping Note: May require additional shipping charges due to being over sized for this item.

K-Body Revo Revolution Clamps

KRE High Performance Parallel Clamps

• Secure clamping force up to 1700 lbs.
• Designed to clamp at 90 degrees to the rail with very large clamping surfaces.
• Ergonomic two component handle with steel socket for applying force with a hex key or driver when desired (Max Torque 17 Nm).
• Operating jaw that stays where you put it for easy set up. Position it where you like and apply clamping force.
• Three removable pressure caps are included, resistant to glue, paint and solvents.
• Two work piece supports prevent the clamped material from contacting the steel rail.
• Converts to spreading, no tools required, in seconds by removing the end stop and reversing the operating head.

*Shipping Note: May require additional shipping charges due to being over sized for this item.

Extender / KBX20

Ever have a project that requires an 80" long clamp? You don't have to invest all that money on a clamp that you will only use once. If you already own K-body® clamps then this is a must have item for your workshop. The Extender will allow you to take any two K-body® clamps and turn them into one long clamp.
›See more product details

×

Extender / KBX20

Ever have a project that requires an 80" long clamp? You don't have to invest all that money on a clamp that you will only use once. If you already own K-body® clamps then this is a must have item for your workshop. The Extender will allow you to take any two K-body® clamps and turn them into one long clamp. Example: two 40" clamps will make one 80"clamp! Durable construction with no loss of strength or clamp parallelism. The Extender does not interfere with the top edge of the bar,allowing your stock to stay nice and flat during glue up. The K-body® Extender is perfect for large, oversized glue ups.

Features

• Turn any two K-body® clamps into one long clamp
• Durable construction with no loss of strength or clamp parallelism
• Perfect for large, oversized glue ups

Note: Clamps not included

Close

Features:

• Turn any two K-body® clamps into one long clamp
• Durable construction with no loss of strength or clamp parallelism
• Perfect for large, oversized glue ups

Note: Clamps not included

KP Blocks

KP Framing blocks greatly simplify clamping set-up. Designed to hold clamps upright and at approximately 90° to each other, they increase stability and reduce frustration. For use with any size of K-Body or Cabinet Master clamps (not included), they facilitate quick, easy and square clamping for assemblies such as raised panel doors, cabinet carcasses, and drawers. The glue-resistant blocks are glass-fiber and can be screw-mounted to a work surface to create a gluing fixture.

Features:

• Simplifies clamping set-up
• For use with any size of K-Body or Cabinet Master clamps (not included)
• Glue-resistant blocks are glass-fiber
• Can be screw-mounted to a work surface to create a gluing fixture

Note: Clamps not included

K-Body® Revo™ Variable Jaw

The Variable Jaw works on all K Body REVO clamps KRE, KR, KREV, KRV. The jaw can be used for multiple glue ups on one clamp, just remove the handle end, add the Variable Jaw and slide the handle back on and now you can do multiple glue-ups with one clamp. You can replace the head of your clamp with variable jaw and that allows both ends to slide in on one clamp. This is very useful for longer clamps making easier on those bigger projects to clamp up. Can also be used as replacement for damaged heads. No tools are required to add the variable jaw

Features:

• Works on all K Body REVO clamps
  KRE, KR, KREV, KRV
• Can be used for multiple glue ups on one clamp
• Replace the head of your clamp with variable jaw which allows both ends to slide in on one clamp
• Can be used as replacement for damaged heads

Note: Clamps not included

K-Body® Revo™ Tilting Adaptor

Pivoting jaw self aligns on tapered & irregular shaped materials. Molded polyamide

Features:

• Jaws Pivot (-15° to+15°)
• KR-AS slides on and off of fixed and moveable jaws
• Perfect for holding materials that are irregularly shaped
• Pivoting jaws easily slide onto channels in fixed and stationary jaws, after removing standard jaw pads
• Can be used above and below rail and can be stacked for special applications
• No tools are required for mounting to K Body REVO models KRE, KR, KREV, KRV.
• Comes in a set of 2

Note: Clamps not included

K-Body® REVO™
Replacements Jaw Pads

Replacements pads for K-Body® REVO™

Features:

• Pads slide on & off in molded channels on fixed and moveable jaws of K Body REVO
• Resistant to glue, varnish, paint, & grease.
• Can be washed with soap and water or in dishwasher Molded polyamide
• Come 2 per pack

Includes:

• 2 ea. Bessey K-Body® REVO™ Replacements Jaw Pads

Note: Clamp not included

Revo™ Rail Protection Pads

Rail protection pads snap onto rail and prevent clamped material from contacting steel rail.

Features:

• Fits all Bessey K Body clamps (old style and new)
• Protects work material from accidental damage by contact with rail surface
• Rail protection pads are designed so that Bessey TK-6 clamps can be used to attach Bessey K Body REVO clamps to work surfaces
• Molded polyamide
• 2 per pack

Revo™ End Rail Clip

Replacement End Piece Stop for Bessey KR-EC K-Body REVO Fixed Jaw Parallel Clamps. Place in hole at the end of rail to stop handle. Used with Revo™ K-Body® clamps.

Features:

• Used with Revo™ K-Body® clamps

Includes:

• 1 ea. Bessey® Revo™ End Rail Clip