Dust Collection

4" - 2-1/2" Quick Connect Adapter

This 4" to 2.5" Dust Collection Reducer Adapter makes it easy to connect a 4" tool port to any 2.5" shop vacuum hose using a durable ABS connector and a flexible 4" rubber cuff that forms an airtight seal. The integrated cuff compensates for minor port variations to maintain strong suction, while the included stainless steel hose clamp ensures a secure hold during high‑vibration use. Designed for fast, tool‑free installation, this reducer is ideal for moving between table saws, planers, jointers, sanders, CNC machines, and other 4" dust collection equipment.

Features:

• Connects 4" tool ports to 2.5" vacuum hoses
• Rubber cuff creates a tight, leak‑free seal
• Includes stainless steel clamp for secure fit
• Durable, impact‑resistant ABS construction
• Tool‑free installation for quick setup

4" Quick Connect Adapter

This Universal 4" Dust Collection Hose Adapter features a flexible rubber cuff and durable ABS connector to create a tight, leak‑free seal on any 4" OD tool port. The included stainless steel clamp keeps the connection secure under heavy shop use, while the tool‑free design makes it easy to switch between machines in any 4" dust collection system.

Features:

• Compatible with standard 4" OD dust ports and hose cuffs
• Rubber cuff creates a tight, leak‑free, high‑suction seal
• Includes stainless steel clamp for secure attachment
• Durable ABS construction resists impact and abrasion
• Tool‑free installation for fast connection changes

4" Quick Connect

4” Quick Connect is designed to be pressed on to any 4” tapered diameter opening for a quick and easy fit, the opposite end accepts a 4” hose. A hose clamp is required on one end for proper connection.

Features:

• Designed to be pressed on to any 4” tapered diameter opening
• Quick and easy fit
• Opposite end accepts a 4” hose

4" Threaded Quick Connect

4” Threaded Quick Connect is designed to be pressed on to any 4” taper diameter opening for a quick and easy fit. The opposite end will accept a 4” hose by simply threading it on . No hose clamp required.

Note: Threaded fittings can fit either left or right threaded hoses. (Even if the hose is opposite thread of fitting, the hose will stretch over threads for a secure fit.)

4" to 2-1/4" Threaded Quick Connect Reducer

4" to 2-1/4" Threaded Quick Connect is designed to be pressed on to any 4” taper diameter opening for a quick and easy fit. The opposite end accepts a 2-1/4” hose by simply threading it on. No hose clamps are required.

Note: Threaded fittings can fit either left or right threaded hoses. (Even if the hose is opposite thread of fitting, the hose will stretch over threads for a secure fit.)

4" Quick Connect Blast Gate

Finally, a Blast Gate you can put directly on another fitting or even some machine ports. The 4" Quick Disconnect Blast Gate has a standard 4" opening which allows you to clamp a standard 4" hose around it. The other end is tapered to accept virtually any 4" fitting or port. The Quick Disconnect Blast Gate is an absolute must for any wood shop!

Features:

• Standard 4" opening
• The other end is tapered to accept any 4" fitting or port
• The Quick Disconnect Blast Gate is a must for any wood shop.

Includes:

• 4" Quick Connect Blast Gate - 1 each

4" Threaded Quick Disconnect Blast Gate

The threaded quick disconnect blast gate allows you to connect your 4" hose directly to the opening of one end of the blast gate without the use of a hose clamp. The blast gate has tapered quick connect opening on the opposite side for easy connection to dust port flanges.

Features:

• Connect your 4" hose directly to the opening of the blast gate without the use of a hose clamp
• Tapered quick connect opening on the opposite side for easy connection to dust port flanges

Includes:

• 4" Threaded Quick Disconnect Blast Gate - 1 each

Note: Threaded fittings can fit either left or right threaded hoses. (Even if the hose is opposite thread of fitting, the hose will stretch over threads for a secure fit.)

Quick Dis-Connect Ball Joint Fittings

#477 - 4" Quick Dis-connect x 2-1/2" Hose end Ball Joint Fitting

The Ball joint fitting is designed to be pressed on to any 4" tapered diameter opening for a quick and easy fit. The Ball Joint prevents kinking of hose at the connection point which allows for great mobility. The opposite end accepts a 2-1/2" hose. A 2-1/2" hose clamp is required on one end for proper connection.

#478 - 4" Quick Dis-connect Ball Joint Fitting

The 4" Ball joint fitting is designed the same has 477, but the opposite end accepts a 4” hose. A 4" hose clamp is required on one end for proper connection.