Dust Collection

Anti-Static Dust Hose

When setting up your dust collection system it is generally recommended that you ground your dust collection hose to prevent any kind of shock or electrical spark hazard. While this works well, it can lead to your hose getting tangled or caught on machinery around your shop and not to mention the time it takes to install. Fulton’s Anti-Static hose virtually eliminates this problem at the source - the hose. The hose is already grounded to save you from the aggravation of grounding each hose. It impregnated with a ”carbon black” material. Carbon black is a conductive material that helps absorb the natural electrical current that can be produced while dust is flowing through the hose. The hose is flexible and is very rugged making it ideal for any woodworker. Fulton’s Anti Static hose is available in 21/2” or 4” diameters and in either 10’ or 20’ lengths.

Note: Anti-Static Dust Hose is a Left thread hose.

EZ Flex Hose

Extend the EZ Flex hose up to 7 times it's original length and retract it back to it's original size when not in use! This makes EZ Flex hose perfect for any size workshop. Maneuver in, out and around your shop machines without worrying about the amount of slack on the hose. The hose works with standard dust collection fitting sizes (21/2" and 4" - depending what you use).

EZ Flex hose is available in two
different lengths and two different diameters:

• 2-1/2" Dia and 3' to 21' length and 4' to 28' lengths.
• 4" Dia and 3' to 21' length and 4' to 28' lengths.

Note: Hose lengths and total stretch are approximate sizes.

Note: EZ Flex Hose is a Left thread hose.

Black Flex Hose

Our black flex hose is constructed of a high grade plastic that allows you to bend and maneuver your hose around your shop machines and other obstacles. The hose is also capable of being used as your main line in your dust collection system or as a simple branch off . You can add splices, Y’s, T’s, elbows, or any fitting that you need, in order to achieve your perfect shop dust collection system.

Note: Black Flex Hose is a Left thread hose.

Clear Flex Hose

Spiral reinforced Clear Hose allows easy inspection for locating potential clogs in your duct work. Our clear flex hose is constructed of an abrasion resistant plastic. Since it is clear, the hose allows for visibility on the inside of the line to see any large pieces lodged inside. The hose remains flexible over a wide range of temperatures and will not collapse. Add splices, Y’s, T’s, elbows, or whatever fitting that seems fit for your shop. Note: Clear Flex Hose is a Left thread hose.

Black Super Flex Hose

The black super-flex wire reinforced vinyl hose is strong, flexible, and durable. It’s extreme flexibility allow you to easily position it exactly where you want it. Reinforced with heavy duty wire (.050" thick) the hose will not collapse even under heavy suction. Use the wire to ground your system.

Note: Black Super Flex Hose is a Left thread hose.

Clear Super Flex Hose

Clear super-flex wire reinforced vinyl hose is strong, flexible, and durable. It’s extreme flexibility allows you to easily position it exactly where you want it. Reinforced with heavy duty wire (.050"  thick) the hose will not collapse even
under heavy suction. Use the wire to ground your system.

Note: Clear Super Flex Hose is a Left thread hose.

Heavy Duty Clear PVC Dust Collection Hose

Heavy duty PVC hose is a very durable and flexible hose that is perfect for the work shop. The PVC hose is wrapped around a steel wire that can be easily grounded. A tight bending radius allows you to maneuver the hose anywhere in your shop, without worrying about kinks. This heavy duty PVC hose won’t collapse under pressure from your dust collector and the hose is clear so you can see directly inside to spot any kind of obstruction.

Note: Heavy Duty Clear PVC Dust Hose is a Left thread hose.

2-1/2" Stay Flex Hose with 360° Rotating Adaptors

The Stay Flex Hose contracts for easy storage and it conveniently extends for easy placement in, on or around any shop machine. The hose when contracted measures 12" and when fully extended measures over 3 feet giving you plenty of length for most small workshop projects. The 360° Rotating adaptors are the perfect solution to hose binding and kinking. The adaptor body rotates as you move the hose giving you total mobility with your hose around your shop. Each adaptor screws directly into the Stay Flex Hose so you don't need any hose clamps to secure them! The Stay flex hose with rotating 360° adaptors is perfect for use with bandsaws, router tables, drill presses and more.

Note: Stay Flex Hose is a Left thread hose.

Dust Collection Kit

The Flexaust® Commercial MRO General Pick-Up Accessory Kit features a lightweight and flexible polyethylene copolymer 1.5” x 12 ft. Flx Plus Hose which is reinforced with an integral polyethylene helix, a 1.5” swivel cuff, 2.25” adapter, a 4” utility tool, and 1.5” x 11” crevice tool. This kit is suitable for wet or dry vacuum applications and the hose features a smooth interior and is highly abrasion, crush, and chemical-resistant.

Includes:

• 1.5" x 12' StatPath Plus Hose (Orange)
• 1.5" Swivel Cuff
• 2.25" Adapter
• 4" Utility Tool
• 1.5" x 11" Crevice Tool

1-1/2" Power Tool Hose w/ Fitting

The small flexible dust collection power tool hose with fittings ensures a cleaner shop. Comes with two different flexible rubber fittings on each end of the hose designed to fit most power tool ports. Can also be used on stationary tools as well. Adapts to 2.5" Shop Vac opening using a 1.5" to 2.5" Reducer (item # 444 SOLD SEPARATELY)

Hose is available in 10’ and 25’ lengths.

• 10' Length super flexible will fit most power tool ports
• Large end is apx. 1-3/8" O.D and 1-5/32" I.D
• Small. end is apx. 1-732" O.D and 1" I.D
• Adapts to 2.5" Hose using a 1.5" to 2.5" Reducer Sold Separately
• Adapts to 2.5" Shop Vac opening using a 1.5" to 2.5" Reducer (item # 444 SOLD SEPARATELY)

10' Universal Power Tool Hose Kit

Plug into most any wet/dry vac and with two different rubber fittings you will be able to provide dust collection to multiple power tools and accessories. The Universal Power Tool Hose Kit will become the most used hose system in your shop. The rubber fittings are both threaded so they easily and quickly attach to either end of the hose. This will enable you to attach the hose to tools like sanders, routers, pocket hole jigs and more.

Kit Includes:

• 1 ea. 1-5/16" x 10' Hose
• 2 ea. 1" I.D. x 1-3/16" Taper up to 1-13/64" O.D. Rubber Hose End
• 2 ea. 1-1/2" I.D. x 1-13/16" O.D. Rubber Hose End
• 2 ea. 1-1/4" I.D. with 1-15/32" taper up to1-35/64" O.D. on Small End and the Large End is 2-1/4" Taper up to 2-5/16" O.D. Plastic Wet/Dry Vac Adapter

Stay Put™ Hose

Bend it, turn it, twist, pull it, the Stay Put™ hose is perfect for anywhere in your shop. The Stay Put™ hose can be compressed and extended all while holding it's shape no matter how you move it. The versatility of the Stay Put™ allows you to come up with many creative uses for it in the shop, especially on your bandsaw, drill press and scroll saw. Made of rigid polypropylene plastic the hose is plenty tough for everyday shop use. Hose extends from twelve inches to approximately thirty six inches long. The Stay Put™ hose is available in 2-1/2" and 4" diameters.

Note: Stay Put™ Hose is a Left thread hose.

Stay Put™ Hose Kit & Fittings

We have put together a convenient stay put hose package that includes all the fittings and hose necessary for a quick and simple set up. The kit is available in 21/2" and 4" sizes to work with most vac's or dust collectors. Each kit includes 2 each screw adaptors, 1 each rectangular nozzle, 1 each tapered nozzle and 1 each three foot long stay put hose. The fittings are also available to be purchased separately.

Note: Stay Put™ Hose is a Left thread hose.

Stay Put Hose Mounting Bracket

The Stay Put Hose mounting bracket allows you to mount your Stay Put Hose on your workbench, drill press, router table and more! This unique bracket has a removable base that when removed, allows you to slide a universal fence clamp (not included) into the pre-drilled 3/8" hole. This gives you the ability to attach the brac.99ket to most any flat surface like your workbench or router table. With the base attached to the bracket, you can then feed the 4" steel clamp (included) into the pre-milled rectangular slot and attach the unit to most any post in your shop, which is perfect for machines like your drill press. The Stay Put Hose bracket is designed to be used with the Stay Put 21/2" hose only. The universal clamps are available in two sizes according to jaw pad to end of clamp. The clamps can also be used to secure sacrificial table saw fences and router fence stop blocks.

Note: Universal Fence Clamp Not Included.