Dust Collection

4" Router Table Dust Port#

Item #386 - 2-1/2" Router Table Dust Port
Dust Ports are the most popular fittings used in creating an airway on your router table, bandsaw or any other machine that does not come with a dust port. This Right Angle Dust port allows easy connections from your router table, bandsaw or other machines to your dust collection system using a 4" to 2-1/2" reducer (SOLD SEPARATELY)

• Will fit just about any router table fence system.
• The small end of a 4" to 2-1/2" reducer fits inside the right angle port.(Reducer Sold Separately)
• Attach a 4" hose to the larger end of reducer with a hose clamp (Hose Clamp Sold Separately)

Item #441 - 4" to 2-1/2" Reducer
Can be used in combination with the 4" Router Table Dust Port. The small end on the 4” to 2-1/2” reducer fits perfectly inside the right angle port so you can then attach a 4” hose to the larger end of the reducer with a hose clamp.

2-1/2" Extended Router Table Dust Port

2-1/2" Extended Dust port directly accepts a standard 2-1/4" Shop-Vac® hose end in the dust port opening. No hose clamp is required for this type of connection. You can easily attach a standard 2-1/2” dust collection hose around the outside of the extended dust port opening with a single hose clamp.

Features:

• Directly accepts a standard 2-1/4" Shop-Vac® hose end in the dust port opening
• Easily attach a standard 2-1/2” dust collection hose around the outside of the extended dust port opening with a single hose clamp
• The fitting itself attaches to the back of most router fences

2-1/2" Low Profile Dust Port

2-1/2 Low Profile Dust port directly accepts a standard 2-1/4" Shop-Vac® hose end in the dust port opening. You can also attach a standard 2-1/2” dust collection hose around the outside of the dust port opening with a single hose clamp. The fitting itself attaches to the back of most router fences with two standard wood screws.
›See more product details

×

2-1/2" Low Profile Dust Port

2-1/2 Low Profile Dust port directly accepts a standard 2-1/4" Shop-Vac® hose end in the dust port opening. You can also attach a standard 2-1/2” dust collection hose around the outside of the dust port opening with a single hose clamp. The fitting itself attaches to the back of most router fences with two standard wood screws. The low profile makes this fitting an excellent add-on to any drill press fence system.

Features

• The 2-1/2" Extended Dust port directly accepts a standard 2-1/4" Shop Vacuum hose end.
• The fitting attaches to the back of most router fences with 2 standard wood screws.
• Attach a standard 2-1/2" dust collection hose around the outside of the extended dust port opening.
• Outside connection requires a hose clamp for proper connections

Close

Features:

• The 2-1/2" Extended Dust port directly accepts a standard 2-1/4" Shop Vacuum hose end.
• The fitting attaches to the back of most router fences with 2 standard wood screws.

2-1/2" Router Table / Bandsaw Dust Port

2-1/2" Router / Bandsaw Dust Port is one of the most popular fittings used in creating an airway on you router table, bandsaw or any other machine that does not come with a dust port. Attaches with 4 screws (not included) on each corner. The dust port will accept a 2-1/2” hose. A hose clamp is required for this type of connection. This fitting will also accept a standard 2-1/4" Shop-Vac® hose end, no hose clamp is required for this type of connection.

Features:

• Universal dust port for any shop made fence system
• Can be fitted to band saw or other machines

4" Dust Port

4” Dust port can be used on machines with 4” openings, such as bandsaws and joiners. Attaches with 2 screws (not included) at the top and bottom. The dust port accepts 4” hose. A hose clamp is required for proper connection

Features:

• Universal dust port for any shop made fence system
• Can be fitted to Router table fences, band saws or many other machines.

Includes:

• 4" Dust Port - 1 ea.

2-1/2" Round Dust Port Flange

Round dust ports are the perfect way to add a dust port to any machine without one. Attach it directly to your machine with screws (not included). Hose clamps are required for proper connection

Features:

• Round dust ports are the perfect way to add a dust port to any machine without one
• Attach it directly to your machine with screws

Includes:

• 2-1/2" Round Dust Port Flange - 1 ea.

4" Round Dust Port Flange

Round dust ports are the perfect way to add a dust port to any machine without one. Attach it directly to your machine with screws (not included). Hose clamps are required for proper connection

Features:

• Round dust ports are the perfect way to add a dust port to any machine without one
• Attach it directly to your machine with screws

Includes:

• 4" Round Dust Port Flange - 1 ea.

4" Bell Dust Port

4" Bell Dust Port sets up similar to a flange. It is generally used on larger machines, such as the table saw or joiner. The long neck allows for a 4" hose to be secured in place.

Features:

• Generally used on larger machines such as the table saw or joiner.
• The long neck allows for a 4" hose to be secured in place
• A hose clamp is required for proper connection.
• Measures 9-1/2" long by 4-1/2" wide.

Note: A 4" hose clamp is required for proper connection.

4" Elbow Dust Port

4” Flat End Elbow Dust Port Is a great fitting that is fastened directly to your machine when space is limited around the machine. There is no need for all the extra little connector pieces with this one! A hose clamp is required on one end for proper connection.

Features:

• Outer diameter 4" x 4"
• The 4" flat end elbow fastens directly to your machine when space is limited around the machine.

Note: A hose clamp is required on one end for proper connection. Hose clamps sold separately.

Mini Gulp Dust Hood

Just like it’s big brother the Big Gulp, the Mini Gulp can be used anywhere in the shop where size constraints are an issue. The hood is 13-1/3” x 7-1/4” and accepts a standard 4” dust hose with a hose clamp

Features:

• The Mini Gulp is 13-1/2" x 7-1/4" and accepts standard 4" dust hose with a hose clamp.
• Can be used on your chop saw, lathe, drill press and other machines.
• Place it behind, underneath or where ever is convenient on you machine.
• Great catch all device for dust, chips and debris.

Quick Dis-Connect Ball Joint Fittings

#477 - 4" Quick Dis-connect x 2-1/2" Hose end Ball Joint Fitting

The Ball joint fitting is designed to be pressed on to any 4" tapered diameter opening for a quick and easy fit. The Ball Joint prevents kinking of hose at the connection point which allows for great mobility. The opposite end accepts a 2-1/2" hose. A 2-1/2" hose clamp is required on one end for proper connection.

#478 - 4" Quick Dis-connect Ball Joint Fitting

The 4" Ball joint fitting is designed the same has 477, but the opposite end accepts a 4” hose. A 4" hose clamp is required on one end for proper connection.

Features:

• Ball joint fitting is designed to be pressed on to any 4" tapered opening
• Stops kinking of the hose at connection point.
• Ball swivels for easy placement.
• Stops kinking of the hose at connection point.
• Ball swivels for easy placement.

Big Gulp Dust Hood

The Big Gulp works most anywhere. It's a great catch all for dust, chips and debris. The Big Gulp Dust Hood is 12-1/2” x 16” and accepts a standard 4” dust hose with a hose clamp (not included).

Features:

• The Big Gulp is 12-1/2" x 16" and accepts standard 4" dust hose with a hose clamp.
• Can be used on your chop saw, lathe, drill press and other machines.
• Place it behind, underneath or where ever is convenient on you machine.
• Great catch all device for dust, chips and debris.

Includes:

• Big Gulp Dust Hood - 1 each