The Fulton Panel Max

Why struggle with multiple pipe clamps and bar clamps when you can simply use one system that makes panel glue ups easy. Simply slide in one board, then the next, then the one after that and continue that process until all of your boards are in place. Once all your boards are in the Panel Max, simply latch the Top Pressure Assembly and secure the panel. Its that Easy!

The Fulton Panel Max Equals 4 Way Pressure For Large Panel Glue Ups
The Panel Max was designed to apply pressure on all four sides of your panel. This alone is makes it worth every penny! Not only does it apply 4 way pressure, it applies a lot of it too! Up to 1750 pounds of 4 way pressure on your panel helps keep the boards from racking. This is the perfect clamping device for larger panel glue ups.

Flat Panels, Clean Work Areas and No More Heavy, Cumbersome Clamps!
The Panel Max does so much for the average woodworker and professional alike. It helps you produce flat, smooth glued up panels with minimal effort when compared to using traditional methods. It also helps eliminate racking since you don't need to keep adjusting individual clamps as you do with pipe clamps or and bar clamp methods. Not to mention that since its a vertical glue press that mounts to your wall, it stays out of your way! No more taking up your workbench space. Last but not least, we no longer need be concerned about breaking our back when we try to lift a ridiculous number of heavy pipe clamps. Now when your panel is dry, simply remove it from the press and you're done!

Expand At Your Own Pace
The Panel Max can be lengthened to any length you need. Typically the maximum length of a panel for the base Panel Max with 3 vertical glue press assemblies is approximately 40". We recommend that you have a vertical glue press assembly at 12" intervals on center for optimal performance.

• Applies pressure on all 4 sides of panel
• Up to 1750 lbs of 4 way pressure
• Clamp up to 5" thick stock
• With 3/4" Stock you can glue up to:
  • 41" Panels on Panel Max
• With 5" Stock you can glue up to:
  • 39" Panels on Panel Max
• Easy to Load
• Expandable to any length with Add-On kits (Sold separately) or multiple Panel Max systems

• 3 each of the 43" clamps and hardware.
• 1 each of the 39" mounting rails.