Finishing

Wood Finish Applicator Bundle

Finish your next woodworking project and make it pop! The 22 Piece Applicator Bundles has everything you need to apply your finish and make your project look great! The Applicator Bundle can be used with a large variety of wood finishes including oil, cutting board oil, linseed oil, tung oil, wax, wood butter, furniture butter and a whole lot more!

• 10 White Non-Woven Applicator Pads for applying wood finishes to your project. The white non-woven pads are perfect for this since they are a very high grit, smooth abrasive that won’t scratch or leave unsightly marks behind. The pads help you properly work your chosen wood finish into the wood.
• 2 Terry Cloth Towels are the ideal towels to use for buffing off your wood finish if needed once it is dry. Just fold the towel into a right size for you and your project and buff off the wood finish going with the grain of your wood for an exceptional sheen and luster.
• 10 Stirring Sticks are also included with this pack for stirring your wood finish when needed. The sticks can also be used to dab more wood finish on to your project as needed or on to the applicator pad. Each wood stick measures approximately 6" long

Micro-Mesh®
Starter Kit

This kit is designed for craftsmen to replace the use of steel wool, rottenstone, or pumice. May be used on bare or finished wood. An excellent way to spot match finishes. Can be used wet or dry to achieve matte, satin, or high gloss finishes. Proudly Made in the USA.
›See more product details

× Micro-Mesh®

Starter Kit

Micro-Mesh is a unique cushioned abrasive capable of giving very fine & very controlled scratch patterns. The grits range from 1500 to 12000. The 1500 is slightly more coarse than a conventional 600 grit sandpaper & the 12000 will leave scratch patterns that cannot be detected by the human eye. Micro-Mesh abrasives can polish to an optically clear, reflective state or through the use of a more coarse grit, leave a matte or satin finish. Excellent product to use as a final rub for water-based finishes. This kit is designed for craftsmen to replace the use of steel wool, rottenstone, or pumice. May be used on bare or finished wood. An excellent way to spot match finishes. Can be used wet or dry to achieve matte, satin, or high gloss finishes.

Includes:

• 1 ea. 3" x  4 "  Sheet 1500 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 1800 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 2400 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 3200 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 3600 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 4000 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 6000 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 8000 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 12000 Micro-Mesh
  
• 1 ea. 3" x  4 "   Foam Sanding Block
  
• 1 ea. Set of Instructions

Before Starting the Micro-Mesh Cycle...

Before starting the Micro-Mesh cycle of abrasive sanding, coarse sanding should be done using up to 320 grit sandpaper. Shaping, sawing or turning of the work piece should be complete.Begin with 1500 Micro-Mesh. Sand until all of the sandpaper scratches are removed. Continue with the MICRO-MESH series and cycle up to the desired look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned lemon oil or Danish oil can be applied as a finish on bare wood.

When Applying Multiple Coats...

MicroMesh performs very well in conjunction with polyurethane, polyester, epoxy, lacquer and so on. Follow the manufacturer’s recommended cure times prior to re-coating or applying the finish coat. When you are applying multiple coats, sand from 1500 Micro-Mesh to 3200 or 3600 between coats to remove any orange-peel or dirt. After the final coat has fully cured, polish the surface beginning with 2400 Micro-Mesh and continue through the series (3200-12000) until the desired gloss is achieved.

Satin finishes

Satin finishes are achieved by sanding up to the 3600 grade. The satin finish gets progressively higher in gloss through the 6000 step. High gloss finishes will appear by the 6000 through 12000 step. The wood, the finish used and personal preference determine where to stop. Micro-Gloss liquid abrasive can be hand rubbed onto the finish following the 12000 Micro-Mesh step for an “ultra” high gloss finish.

Close

Starter Kit Includes:

• 1 ea. 3" x  4 "  Sheet 1500 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 1800 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 2400 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 3200 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 3600 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 4000 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 6000 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 8000 Micro-Mesh
  
• 1 ea. 3" x  4 "  Sheet 12000 Micro-Mesh
  
• 1 ea. 3" x  4 "   Foam Sanding Block
  
• 1 ea. Set of Instructions

Micro-Mesh®
Professional Kit

This kit is designed for craftsmen to replace the use of steel wool, rottenstone, or pumice. May be used on bare or finished wood. An excellent way to spot match finishes. Can be used wet or dry to achieve matte, satin, or high gloss finishes. Proudly Made in the USA.
›See more product details

× Micro-Mesh®

Professional Kit

Birthed in the auto body industry, this excellent hand sanding block is made from high impact ABS plastic (it won't break if you drop it), it's comfortable contoured shape fits the hand extremely well, and it has great heft. The superb design of its all stainless steel clip mechanism is one of the fastest and easiest to use. It requires little sandpaper to attach (cutting sandpaper waste), you can load multiple sheets at a time, and it won't ever rust. Use wet/dry paper a lot? The block floats in a bucket of water, allowing built-up particles float away. Colored blocks make it easy to assign different block to each grit. Works with 1/4 sheet sandpaper or 2-3/4" wide file paper. Made in the USA

Includes:

• 2 ea. 3" x  6 "  Sheet 1500 Grit
  
• 2 ea. 3" x  6 "  Sheet 1800 Grit
  
• 2 ea. 3" x  6 "  Sheet 2400 Grit
  
• 2 ea. 3" x  6 "  Sheet 3200 Grit
  
• 2 ea. 3" x  6 "  Sheet 3600 Grit
  
• 2 ea. 3" x  6 "  Sheet 4000 Grit
  
• 2 ea. 3" x  6 "  Sheet 6000 Grit
  
• 2 ea. 3" x  6 "  Sheet 8000 Grit
  
• 2 ea. 3" x  6 "  Sheet 12000 Grit
  
• 1 ea. 3" x  3" x 1" Foam Sanding Block
  
• 1 ea. Set of Instructions

Before Starting the Micro-Mesh Cycle...

Before starting the Micro-Mesh cycle of abrasive sanding, coarse sanding should be done using up to 320 grit sandpaper. Shaping, sawing or turning of the work piece should be complete. Begin with 1500 Micro-Mesh. Sand until all of the sandpaper scratches are removed. Continue with the MICRO-MESH series and cycle up to the desired look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned lemon oil or Danish oil can be applied as a finish on bare wood.

When Applying Multiple Coats...

MicroMesh performs very well in conjunction with polyurethane, polyester, epoxy, lacquer and so on. Follow the manufacturer’s recommended cure times prior to re-coating or applying the finish coat. When you are applying multiple coats, sand from 1500 Micro-Mesh to 3200 or 3600 between coats to remove any orange-peel or dirt. After the final coat has fully cured, polish the surface beginning with 2400 Micro-Mesh and continue through the series (3200-12000) until the desired gloss is achieved.

Satin finishes

Satin finishes are achieved by sanding up to the 3600 grade. The satin finish gets progressively higher in gloss through the 6000 step. High gloss finishes will appear by the 6000 through 12000 step. The wood, the finish used and personal preference determine where to stop. Micro-Gloss liquid abrasive can be hand rubbed onto the finish following the 12000 Micro-Mesh step for an “ultra” high gloss finish.

Close

Professional Kit Includes:

2 ea. 3" x  6 "  Sheet 1500 Grit

2 ea. 3" x  6 "  Sheet 1800 Grit

2 ea. 3" x  6 "  Sheet 2400 Grit

2 ea. 3" x  6 "  Sheet 3200 Grit

2 ea. 3" x  6 "  Sheet 3600 Grit

2 ea. 3" x  6 "  Sheet 4000 Grit

2 ea. 3" x  6 "  Sheet 6000 Grit

2 ea. 3" x  6 "  Sheet 8000 Grit

2 ea. 3" x  6 "  Sheet 12000 Grit

1 ea. 3" x  3" x 1" Foam Sanding Block

1 ea. Set of Instructions

Micro-Mesh™
Cushioned Abrasives
Bowl Sanding Disc

These 1”, 2” and 3” bowl sanding discs are a incredibly fine abrasive that are perfect for virtually any type of contour sanding. Wood Turners use them for a polish sheen and a beautiful lustrous finish coatings. Use for bowl turning or any small project. Hook & Loop Disc.

9 Packs of Micro-Mesh bowl sanding discs:

1 ea. 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12000 grit disc.

18 Packs of Micro-Mesh bowl sanding discs:

2 ea. 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12000 grit disc.

Micro-Mesh®
Soft Touch 2" x 2" Sanding Pads
with Galvanized Steel Dispenser

Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro Mesh Soft Touch sanding pads! Starting with the lowest grit of 1500 all the way up to 12000 grit this abrasive pad pack is sure the leave your project just the way you want it. This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional!
›See more product details

×

Micro-Mesh®
Soft Touch 2" x 2" Sanding Pads
with Galvanized Steel Dispenser

Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable!
Starting with the lowest grit of 1500 all the way up to 12000 grit this abrasive pad pack is sure the leave your project just the way you want it. This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! When using the pads it is recommended that start at the lower grit of 1500 and step or cycle your way up to the high grit of 12000. The more you get into to woodturning the more the reality of being organized comes into play. This couldn't be more true than when it comes to our abrasives. This unique dispenser accepts 2" x 2" Micro-Mesh abrasive pads

Specifically designed for the Micro-Mesh 2" x 2" 9 pack of abrasives, this dispenser has color coded grit chart to help keep your pads in order. This works wonderfully well when step sanding your finished turning project. Simply cycle your way through the grits by pulling the next grit from the dispenser and placing the used one back on top. The dispenser is made from corrosion resistant galvanized steel which also makes it extra durable for the workshop environment. It can be mounted flat against a wall or it can be mounted to a table top. Of course you don't have to mount it at all.

Sandpaper Dispenser for 2 inch x 2 inch Micro Mesh Abrasive Pads

The perfect way to keep your 2" abrasive touch pads organized and easy to find. The more you get into to woodturning the more the reality of being organized comes into play. This couldn't be more true than when it comes to our abrasives

Mount Anywhere in Your Workshop

Quickly and easily mount the dispenser to most anywhere in your shop. It can be mounted to a wall or even to a table top. Either way you'll have your abrasive pads right at your finger tips!

Cycle Through Grits With Ease

Simply pull out the grit you need, use it on your project and place it back on to the top of the stack once you're done. Then, pull out the next grit and repeat the process until you cycle through all the grits. Doing this produces a magnificent finish!

Color Coded Grit Chart

Specifically designed for the Micro-Mesh 2" x 2" 9 pack of abrasives, this dispenser has color coded grit chart to help keep your pads in order. This works wonderfully well when step sanding your finished turning project. Simply cycle your way through the grits by pulling the next grit from the dispenser and placing the used one back on top. The dispenser is made from corrosion resistant galvanized steel which also makes it extra durable for the workshop environment

The dispenser measures 6" tall, 3¼" wide (at base tabs), 2-7/16" wide (actual abrasive holder) by 1½" deep. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process. Package comes with 9 color coded micro mesh pads and 1 each galvanized steel dispenser.

Package Includes:

• 9 color coded micro mesh Soft Touch pads
  • 1ea. 1500 Grit 2 x 2 Soft Touch Pad
  • 1ea. 1800 Grit 2 x 2 Soft Touch Pad
  • 1ea. 2400 Grit 2 x 2 Soft Touch Pad
  • 1ea. 3200 Grit 2 x 2 Soft Touch Pad
  • 1ea. 3600 Grit 2 x 2 Soft Touch Pad
  • 1ea. 4000 Grit 2 x 2 Soft Touch Pad
  • 1ea. 6000 Grit 2 x 2 Soft Touch Pad
  • 1ea. 8000 Grit 2 x 2 Soft Touch Pad
  • 1ea. 12000 Grit 2 x 2 Soft Touch Pad
• 1 ea. Galvanized steel dispenser.

Close

Package Includes:

• 9 color coded micro mesh Soft Touch pads
  • 1ea. 1500 Grit 2 x 2 Soft Touch Pad
  • 1ea. 1800 Grit 2 x 2 Soft Touch Pad
  • 1ea. 2400 Grit 2 x 2 Soft Touch Pad
  • 1ea. 3200 Grit 2 x 2 Soft Touch Pad
  • 1ea. 3600 Grit 2 x 2 Soft Touch Pad
  • 1ea. 4000 Grit 2 x 2 Soft Touch Pad
  • 1ea. 6000 Grit 2 x 2 Soft Touch Pad
  • 1ea. 8000 Grit 2 x 2 Soft Touch Pad
  • 1ea. 12000 Grit 2 x 2 Soft Touch Pad
• 1 ea. Galvanized steel dispenser.

Micro-Mesh®
Soft Touch 2" x 2" Sanding Pads

Sand with these Micro Mesh Soft Touch Pads and get a remarkable hi-gloss, scratch free shine on your plastic or resin impregnated pen blanks. Works great on surfaces that include stabilized woods, acrylics and solid surface materials. Long lasting and easy to use.
›See more product details

× Micro-Mesh®

Soft Touch 2" x 2" Sanding Pads

Sand with these Micro Mesh Soft Touch Pads & get a remarkable hi-gloss, scratch free shine on your plastic or resin impregnated pen blanks. Works great on surfaces that include stabilized woods, acrylics & solid surface materials. The kit includes nine 2" x 2" color coded foam backed abrasive pads ranging from 1500 to 12000 grit plus detailed instructions. Long lasting and easy to use.

Features:

• Abrasive
• This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional!
• Ideal for use with acrylics, plastics, resin or impregnated blanks when turning.
• Works great on automotive and marine body work.
• The pads can also be used around the home for fine repair work.
• Pads are colored coded with foam backing for easy grit identification.
• Long lasting and easy to use

Finishing Just Became a Bit More Enjoyable

Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit. This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful .

Color Coded Pads with Many Uses

Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work. Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.

Available In:

9 Packs of Micro-Mesh Sanding Pads:

1 ea. 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12000 grit pads.

18 Packs of Micro-Mesh Sanding Pads:

2 ea. 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12000 grit pads.

Note: The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.

Close

Features:

• This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional!
• Ideal for use with acrylics, plastics, resin or impregnated blanks when turning.
• Pads are colored coded with foam backing.

9 Packs of Micro-Mesh sanding pads:

1 ea. 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12000 grit pads.

18 Packs of Micro-Mesh sanding pads:

2 ea. 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12000 grit pads.

Micro-Mesh®
Soft Touch 3" x 4" Sanding Pads

Sand with these Micro Mesh Soft Touch Pads and get a remarkable hi-gloss, scratch free shine on your plastic or resin impregnated pen blanks. Works great on surfaces that include stabilized woods, acrylics and solid surface materials. The kit includes nine color coded foam backed abrasive pads ranging from 1500 to 12,000 grit and detailed instructions. Long lasting and easy to use.

9 Packs of Micro-Mesh sanding pads come in:

1 ea. 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12000 grit disc.

Micro-Mesh®
Cushioned Abrasives Polishing Swabs

Used for anything from polymer clay to porcelain, plastics and more, these polishing swabs are ideal for getting into tight spaces, or for use in any other place where a small swab can reach. 12 Swab variety pack of Micro-Mesh® grades ranging from coarse thru ultra fine . Each swab is color-coded and packaged in a header card listing the corresponding grades of Micro-Mesh. Swabs are 5" long. Wash and reuse for fantastic value.

Features:

• 12 Swab variety pack
• Micro-Mesh® grades ranging from coarse thru ultra fine
• Ideal for getting into tight spaces
• Each swab is color-coded
• Swabs are 5" long
• Wash and reuse

Includes:

• 12 Swab variety pack of Micro-Mesh® grades ranging from coarse thru ultra fine

Mirlon Total 4-1/2" x 9" Pads

Mirlon Total is a new innovative product from Mirka. The product has been developed using Mirka innovative Total Coating Technology. Mirlon Total is more aggressive than its forerunner Mirlon and is more open and more flexible. The strengthened fibers make Mirlon Total strong and long-lasting. The product produces a dense scratch pattern and rapid result when sanding. The dense scratch pattern reduces the tension in the surface, which ensures a good result when painting. Mirlon Total is mainly used for mattening of hard-to-reach areas prior to painting. It is also used when feathering out, removing over spray in a blending zone and for spot repairs.

Features:

• Strengthened fibers make Mirlon Total strong and long-lasting
• Mirlon Total can be used both wet and dry.

Non-Woven Pads

Our 6” x 9” non-woven abrasive pads are manufactured from tough synthetic fibers that will not rust or splinter like steel wool. They can be used for dry scuffing or even with chemical solvents. The pads easily conforms to cracks and crevices. Use on many different materials including metal, ceramic, plastic and wood.

Features:

• Flexible abrasive pads are resistant to chemicals
• Will not rust, splinter or shred like steel wool pads
• Provide a longer lasting surface than sandpaper

Item #31 Includes:

• 3 ea. Black, 3 ea. Maroon, 2 ea. White,
  2 ea. Green Pads

Sanding Sticks

Sanding Sticks consist of abrasive paper laminated to foam and plastic creating a rigid tool for hand finishing. Flexible Sanding Sticks can be used wet or dry. They can also be cut and reshaped as needed for sanding difficult-to-reach surfaces.

Features:

• Durable, Flexible & Long Lasting
• Measures 6-1/2" x 3/4"
• Comes in fine, medium & Coarse
• Color coded for easy reference (Colors may vary)
• Washable
• Works with woods, metals, plastic, acrylics & ceramic
• Made in USA

Micro-Mesh®
Cushioned Abrasives 1/2" Buffing Sticks

Troubled with polishing those hard to reach areas, or smaller turnings? Not any longer, micro-mesh has solved that problem with the sanding sticks. The smaller size will now allow you to polish those smaller and more detailed areas. These 1/2" x 5- 3/4" foam backed sticks are coated with an abrasive crystal that will last up to 15 times longer than normal abrasives. Kit includes one each of 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12,000 grit sticks.

Includes 9 color coded Micro-Mesh grits on a 5-3/4" x 1/2" size padded core:
(colors may vary)