Sili^® Glue Products

×

Glue Tray & Comb

Non-Stick-Glue System

The SILI® Tray gives you the perfect place to pour your glue into for easy access. When you are done with your glue up, simply pour the left over glue back into the bottle. SILI® Comb has two functional ends. The Squeegee end allows you to spread your glue evenly over large areas, while the Comb end evenly distributes the glue over your project.

×

Micro Glue Brushes 3 Pack

Applying glue to fine, smaller size projects usually results in using a cotton swab or even our good old "trusty" finger tip. SILI^® Micro Brushes address this age old problem in two ways. First, each brush has a silicone rubber tip that is flexible which makes them perfect for applying glue on to your projects without making a mess. Second, each brush has a matching rigid profile on the opposite end of the handle. The rigid end is perfect for scraping or removing excess glue.

Whether you're a hobbyist, arts and crafts expert or a woodworker, you'll find the SILI^® Micro Brushes extremely useful and very convenient. With three unique profiles you'll be able to work glue into most any tight space. The pack includes a fine tip brush, a chiseled tip brush and a flat tapered tip brush. The brushes are very easy to clean. You can run the flexible tip or rigid tip under warm soapy water or you can simply let the glue dry and peel the glue right off!

Smaller, Finer Glue Ups Made Easy

Applying glue to fine, smaller size projects usually results in using a cotton swab or even our good old "trusty" finger tip. Get into smaller spots like dovetails, box joints, models, round dowel holes and more!

Matching, Usable Profiles at Both Ends

3 Different profile brushes are included in this pack. Each brush has the same profile on each end with one silicone rubber tip and the handle end is rigid in comparison. The flexible rubber tip end is used for applying and spreading your adhesive as needed, while the rigid plastic end is perfect for scraping and removing excess glue from your project.

Fine Point Tipped Brush

The SILI^® Fine Point Tipped Micro Brush is the ideal size for getting into small, round holes and openings like dowel holes and small openings found in plastic model building. The flexible rubber tip end is used for applying and spreading your adhesive as needed, while the rigid plastic end is perfect for scraping and removing excess glue from your project.

Chiseled Tipped Brush

The SILI^® Chiseled Tipped Micro Brush is perfect for small joinery, gaps and tight fitting corners. Woodworkers and model builders love this brush profile since many of their projects have tight fitting, small corners that need to be joined. The flexible rubber tip end is used for applying and spreading your adhesive as needed, while the rigid plastic end is perfect for scraping and removing excess glue from your project.

Flat Tapered Tipped Brush

The SILI^® Flat Tapered Tipped Micro Brush is the general purpose or spreading brush of the three. The tip is flat and textured so it holds more glue for larger areas on your projects. It's perfect for dovetails, box joints, larger model surface areas and more! The flexible rubber tip end is used for applying and spreading your adhesive as needed, while the rigid plastic end is perfect for scraping and removing excess glue from your project.

Wet or Dry, the SILI^® Glue Pod is Easy to Clean!

Since the SILI^® Glue Pod is made from Silicone rubber it is naturally resistant to glue adhesives. This also makes it super easy to clean. Simply run the pod or the lid under warm water with a little bit of dish soap and rinse the glue off. If we forget about the glue and it dries up, simply let it completely dry and peel the glue right off. Peeling the glue off won't damage the glue pod!

×

Glue Pod with Multi Purpose Sealable Lid

Whether you're using wood glue, school glue or mixing epoxy, if you don't have a place to put the glue while working, it can become messy. With several smart design features, the SILI^® Glue Pod will be able to keep your glue where it belongs. The SILI^® Glue Pod features a sloped, rounded interior base that funnels your glue into place at the bottom of the Pod. The Pod's hexagon shape is perfect for easy, quick glue brush dipping and dabbing for just the right amount of glue for your application.

The SILI^® Glue Pod not only keeps your glue contained in one convenient container, it has a lid that pulls double duty and is perfect for a wide variety of glue up projects! Flip the lid over, place it on your work surface and use the aligned notches to hold your glue brushes in place to drip the glue into the lid. You can also attach the lid to the SILI^® Glue Pod using the grooves on the top of the lid. This way, you can let the glue brushes drip directly back into the SILI^® Glue Pod itself.

Keep your glue where it belongs

We've all done it. We get into our shop, craft room, garage or I dare say our kitchen and we are all but ready to start our project and we realize the there is no place to put our glue! Worse yet, we grab a paper plate or even worse yet a paper towel to dump a little bit of glue on to. Not only is it not the best idea, it almost always creates a total and complete sticky mess! Its time to step up to the arts and crafter's, woodworker's, DIYer's or hobbyist's new best friend... The SILI^® Glue Pod! Not only does the SILI^® Glue Pod keep your glue where it belongs, it also keeps your brushes (not included) where they belong when not in use. This glue pod container is sure to become one of your most used tools for your home or even professional projects!

2 Full Fluid Ounces of Glue

The SILI^® Glue Pod will hole up to 2 fluid ounces of glue which is plenty for many of our projects. The curved inside base funnel your glue into the base and with its soft, curved corners, the glue won't stick. Simply dip or dab your brush or glue spreader of choice into the glue pod and then apply your glue without the mess.

Wet or Dry, the SILI^® Glue Pod is Easy to Clean!

Since the SILI^® Glue Pod is made from Silicone rubber it is naturally resistant to glue adhesives. This also makes it super easy to clean. Simply run the pod or the lid under warm water with a little bit of dish soap and rinse the glue off. If we forget about the glue and it dries up, simply let it completely dry and peel the glue right off. Peeling the glue off won't damage the glue pod!

Versatile Just May Be an Understatement

The SILI^® Glue Pod Lid Can:

• Be placed on the glue pod to seal the remaining glue for prolonged storage up to a week
• Be attached to the top of the glue pod to act as a drip try for your glue brushes (glue brushes not included)
• Be flipped upside down and placed on to your work surface to hold your brushes
• Be used as a pallet for your glue on smaller more delicate projects
• Be used to hold up to two brushes (brushes not included) at a time

When you're done with your glue up project you can place the lid back on to the SILI^® Glue Pod. The lid seals snuggly on to the pod allowing you to store your glue for prolonged storage. We recommend storing glue in the sealed glue pod for no more than a week. When you want to dispense your glue back into another container, the hexagon shape and rounded corners of the pod makes the process easy.

As with all of our SILI^® brand items, the SILI^® Glue Pod and Lid are made from silicone rubber making it super easy to clean. The first method of cleaning the glue is using warm, soapy water. Simply run the SILI^® Glue Pod and Lid under warm water with a dab of dish soap and work the glue off of the pod surface. Once all of the glue is gone, let the pod and lid dry before using it for your next project.

Typically we are doing a lot of things at one time and we can sometimes forget stuff. When working on our projects, sometimes we forget to put the lid back on our glue containers. In the case of the SILI^® Glue Pod, you may still have glue in the pod or even on the lid. No worries! Simply let the glue completely dry. Once the glue is dry, you can easily peel the glue right off without damaging the pod or the lid! This makes clean up for us forgetful few even easier!

×

Pod with Sealable Lid & 3 Micro Glue Brushes

Whether you're using wood glue, school glue or mixing epoxy, if you don't have a place to put the glue while working, it can become messy. With several smart design features, the SILI^® Glue Pod will be able to keep your glue where it belongs. The SILI^® Glue Pod features a sloped, rounded interior base that funnels your glue into place at the bottom of the Pod. The Pod's hexagon shape is perfect for easy, quick glue brush dipping and dabbing for just the right amount of glue for your application.

The SILI^® Glue Pod not only keeps your glue contained in one convenient container, it has a lid that pulls double duty and is perfect for a wide variety of glue up projects! Flip the lid over, place it on your work surface and use the aligned notches to hold your glue brushes in place to drip the glue into the lid. You can also attach the lid to the SILI^® Glue Pod using the grooves on the top of the lid. This way, you can let the glue brushes drip directly back into the SILI^® Glue Pod itself.

Smaller, Finer Glue Ups Made Easy

Applying glue to fine, smaller size projects usually results in using a cotton swab or even our good old "trusty" finger tip. Get into smaller spots like dovetails, box joints, models, round dowel holes and more! The SILI^® Glue Pod and Micro Glue Brushes are the ideal way to keep your glue contained and applied to your exact locations without all the typical mess that other brushes and glue containers leave behind.

Matching, Usable Profiles at Both Ends

3 Different profile brushes are included in this pack. Each brush has the same profile on each end with one silicone rubber tip and the handle end is rigid in comparison. The flexible rubber tip end is used for applying and spreading your adhesive as needed, while the rigid plastic end is perfect for scraping and removing excess glue from your project.

Fine Point Tipped Brush

The SILI^® Fine Point Tipped Micro Brush is the ideal size for getting into small, round holes and openings like dowel holes and small openings found in plastic model building. The flexible rubber tip end is used for applying and spreading your adhesive as needed, while the rigid plastic end is perfect for scraping and removing excess glue from your project.

Chiseled Tipped Brush

The SILI^® Chiseled Tipped Micro Brush is perfect for small joinery, gaps and tight fitting corners. Woodworkers and model builders love this brush profile since many of their projects have tight fitting, small corners that need to be joined. The flexible rubber tip end is used for applying and spreading your adhesive as needed, while the rigid plastic end is perfect for scraping and removing excess glue from your project.

Flat Tapered Tipped Brush

The SILI^® Flat Tapered Tipped Micro Brush is the general purpose or spreading brush of the three. The tip is flat and textured so it holds more glue for larger areas on your projects. It's perfect for dovetails, box joints, larger model surface areas and more! The flexible rubber tip end is used for applying and spreading your adhesive as needed, while the rigid plastic end is perfect for scraping and removing excess glue from your project.

The Multi-Purpose Lid Can....

• Be placed on the glue pod to seal the remaining glue for prolonged storage up to a week
• Be attached to the top of the glue pod to act as a drip try for your glue brushes
• Be flipped upside down and placed on to your work surface to hold your brushes
• Be used as a pallet for your glue on smaller more delicate projects
• Be used to hold up to two brushes (brushes not included) at a time

×

Roller & Tray

Designed to work together, the Sili Glue Roller and the Sili Glue Tray help you make quick work of larger glue up projects. It doesn't matter if you're an arts and crafts hobbyist, a professional woodworker or model making enthusiast, this combo pack will be a useful tool when you need to perform larger glue ups on your projects.

The Sili Glue Roller is made with angled grooves which allow the glue to be worked into the roller and help retain the glue on the roller. The recessed grooves also keep the glue from dripping too quickly and gives you ample time to apply the glue to your project regardless of size. The grooves also allow just enough glue "flow-through" to keep things rolling with minimal resistance. This also helps to keep the roller from gliding or skating across the wood when applying the glue. The roller itself is a has no protruding metal on one side to allow for flush passes on your glue ups. This means you can apply glue right up against another board and have no worries about marring that work piece. This also makes it easier to glue right up to the edge of your project.

Made entirely of silicone rubber, the Sili tray resembles a paint roller tray but on a smaller scale and it is more flexible to easily dispense the adhesives back into the container after you are done. The tray has been designed for use with the Sili Glue Roller (not included and sold separately), however it can be used with any glue brush or applicator that fit within its dimensions.

Ideal for Arts, Crafts, Woodworking project and more!

The Sili Roller makes quick work of larger glue up projects that we tend to encounter more often than not. Made from silicone rubber the roller is the perfect blend of softness and rigidity to apply glue to most any type of surface including wood, paper, mdf, fiber board, composites and more! The Sili Roller is also small enough to get into tight spaces when needed.

Rinse, Dry and Reuse

When you're all finished up for the day, cleanup couldn't be easier. Simply run the roller under warm tap water and work the glue off with your fingers. Let the roller completely dry then you can start using the roller for your next glue up project.

The easy way out...

Lets face it, we all hate cleaning up after our projects are done. Or rinsing and drying the roller just may not be within workshop time constraints that day. Well, the great thing about the Sili Roller and the silicone material we used to form the roller is that you can let the glue dry overnight so it cracks and peels right off of the roller in seconds revealing a clean, ready to use Sili Roller!

The Perfect Glue Spot

Quit cutting out old cups or using old newspaper to temporarily place your glue. The Sili Tray is the perfect spot for your glue while your working on your project!

Groovy?

Why yes it is, well grooved to more exact. The grooves on the roller are for more than just appearance. The grooves help retain the adhesive so it doesn't drip as quickly. This allows you more time to apply the glue to your work surfaces.

Both the Sili Roller and Tray are of course made from silicone rubber which means they are super easy to clean! You can simply run them under warm water and quickly work the glue off with your fingers. You can also let the glue dry overnight and then crack and peel the glue off revealing a clean, ready to go surface underneath. Either way, it's quick and virtually painless to clean the Sili Roller and Tray!

×

SILI^® Sticks - Set of 2

When you need to apply glue in small areas like dowel holes, biscuit slots, model builds, arts and crafts or anywhere that is hard to reach, we typically will improvise and grab a cotton swab or even worse yet, we use our finger tip. While there are other glue applicators available, none of them work quite like or nearly as well for small glue ups like the SILI^® Glue Sticks. This pack includes 2 SILI^® Glue Sticks.

The SILI^® Glue Sticks are made with dual profile tips on each brush. The flexible, silicone rubber tapered or dowel tip end is perfect for applying glue into small holes. This tip is not only tapered for easily fitting into the hole, but it is ribbed so the glue doesn't drip off so easily. This makes is perfect for applying your glue exactly where you want it to go.

The opposite end is a flat, chisel style end that is also made from silicone rubber and is flexible enough to help apply glue with just the right amount of touch and finesse when needed. This end works great for slightly larger areas and is especially useful for working glue into wood biscuit slots for wood biscuit joinery.

Two Versatile and Easy to Use Silicone SILI^® Sticks

With each pack you'll receive two SILI^® Sticks. Each stick has to different profile tips for getting into smaller, tighter spaces.

Use em' Almost Anywhere...

These sticks are perfect for dowel holes, coin size flat bottom holes, pocket hole fills, biscuit slots, domino mortises, model building and a whole lot more!

Flexible, Ribbed and Tapered

• Flexible to make applying glue easy
• Ribbed to help retain enough glue to apply where needed
• Tapered to get into smaller, tighter areas

Flat Chisel Tip

This tip is perfect for smaller slots like those found in biscuit joinery, domino joinery, arts, crafts and model building

Kinda Feels Like a Pencil

When you first pick up on of the SILI^® Sticks, you may notice a familiar feel to it. It fits into your hand like a pencil. In fact, the largest diameter of the comfort grip is very close to that of a No. 2 pencil. This gives you the perfect amount of control when applying your glue.

Water vs Dry

It doesn't matter if you want to clean the brush right away or wait (or forget to do so) for the glue to dry. If you want to clean the brush right away, simply run it under warm water and work the excess glue off with your fingers. If you let the glue dry, bend the tip, crack the glue and peel the glue right off!

2 SILI^® Sticks

Each pack includes two SILI^® Sticks

The handle features a comfortable grip shape for extended periods of use and it also features a flat paddle end with a built in rest. The paddle is perfect for applying small amounts of glue to smaller areas like wood dovetail or box joints. The rest on the paddle end allows the brush to be set down without touching your table top surface.

This revolutionary brush makes glue up project fun and enjoyable without the mess. Use the SILI^® brush over and over again without having to purchase new brushes. The SILI^® brush tip is made from silicone rubber for easy clean up. The tip is also angled just right for optimal glue application regardless of the project.

×

Mat

Non-Stick Workbench Mat

Keep your workbench, workstation, or any work surface, glue, scratch, marr, and even dent free with SILI® Mat. Simply roll the SILI® Mat out onto your workbench and your ready to go. The SILI® Mat is made out of a 1/8" thick silicone rubber that does not absorb glue or liquids. You can quickly clean up glue drips with warm water or you can let the glue dry and peel it right off the mat! Works with wood or polyurethane glues. The SILI® Mat is approximately 60" long and 23-1/2" wide which will fit comfortably on your work bench. The mat can be cut to be customized to any shape or size that you need. Works great for kitchen cabinets and drawers.

Keep Your Work Area Clean and Free of Build Up

We don't always think about it, but keeping our work area clean and free of build up is essential to a good working environment. Not to mention, many of us either hand made our workbench or spent a good dollar on one. Why not protect it from all of the messy shop liquids and substances? Typically we like to just start working on our workbenches and we tend to spill or drip paint, glue, finish and well, you get the point.

1/8" Thick to Protect Your Work Surface

The Sili Mat is 1/8" thick to protect your work surface in a serious manner. It is extremely durable and when glue drips on to it, simply let it dry and peel off! That trick works with wood or polyurethane glues. Either way, its really that easy.

Ideal for Woodworkers

Keeping your workbench, workstation, or any work surface, glue, scratch, marr, and even dent free with Sili-Mat is really just as simple as unrolling the mat and placing into position.

Dried Glue Peels Right Off

The Sili Mat is 1/8" thick to protect your work surface in a serious manner. It is extremely durable and when glue drips on to it, simply let it dry and peel off! That trick works with wood or polyurethane glues. Either way, its really that easy.

Ready to "un-roll" Right Out of the Box!

The Sili-Mat is approximately 60" long and 23-1/2" wide which will fit comfortably on your work bench. The mat can be cut to be customized to any shape or size that you need. Works great for kitchen cabinets and drawers too! Ready to "un-roll" right out of the box!