Glue & Accessories

Instant Bond Glue & Activator

Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. This adhesive is also very effective on a variety of materials and substrates.

Thin: Ideal for Wicking Hair Line Cracks
5 second handling - 3 second set Can be used with out activator

Medium: Designed to fill Knots & Voids
7 second handling - 5 second set Soak end grains to prevent splitting

Thick: Designed for Finish & Trim Carpentry
10 second handling - 8 second set Also ideal for MDF & Porous wood

Gel: Excellent for Filling Large Gaps
30second handling - 20 second set Also ideal for MDF & Porous wood

Activator: Accelerates the curing of adhesive with thin, medium, thick and gel with quick Professional results.

Instant Bond Adhesive Medium - Jet Black

Titebond Instant Bond Medium - Jet Black is an ethyl cyanoacrylate adhesive that provides professional-strength, permanent bonds to most common materials. This rubber-toughened formula is extremely impact-resistant and ideal for hiding imperfections, repairing cracks, and filling knots/voids in wood materials. With a longer working time of approximately 40 to 60 seconds (compared to other cyanoacrylates), it allows for precise application for complex projects.

Features:

• Fast set - Eliminates or reduces clamp time
• Unaffected by finishes
• 2 year shelf life
• Excellent heat and solvent-resistance
• Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
• Triple distilled for purity & consistency

Super Fast Thin CA Glue

20 month shelf life The EM-02 is a wicking type adhesive. This watery-thin adhesive infiltrates hairline fractures, pores, and narrow slots filling any empty voids. The EM-02 is well suited for porous and fragile material such as soft wood (balsa), ceramics, unpolished rocks and minerals, and fossil bones. For inlay applications, it penetrates and stabilizes the material through capillary action. The EM-02 will immediately soak into a soft, porous object until it is fully saturated with the CA. In such instances, it is advised to use an accelerator to create an instant reaction so full saturation of the object is unnecessary. It is often used as a finish by applying several coats, sanding, and then polishing to a high gloss.
›See more product details

×

Instant Bond Glue & Activator

20 month shelf life The EM-02 is a wicking type adhesive. This watery-thin adhesive infiltrates hairline fractures, pores, and narrow slots filling any empty voids. The EM-02 is well suited for porous and fragile material such as soft wood (balsa), ceramics, unpolished rocks and minerals, and fossil bones. For inlay applications, it penetrates and stabilizes the material through capillary action. The EM-02 will immediately soak into a soft, porous object until it is fully saturated with the CA. In such instances, it is advised to use an accelerator to create an instant reaction so full saturation of the object is unnecessary. It is often used as a finish by applying several coats, sanding, and then polishing to a high gloss.

Used For:

• High gloss finishes for a hard, clear, and waterproof coat
• Repairing and filling cracks, inclusions, voids, and knots in wood
• Woodturning and knife handle finishes for a hard, clear, and waterproof coat
• Wicking into and stabilizing guitar frets
• Gluing and repairing guitar inlays on the headstock, body, and fretboard
• Fossil preparation through infiltration and stabilization of the fossil before extraction
• Repairing small cracks in stone
• Metal and turquoise inlays
• Jewelry manufacturing and repair
• Furniture refinishing and antique repair
• Bonding fiberglass to balsa wood

Specifications:

• 2 mPa·s viscosity
• Very Thin adhesive
• 0.002" gap filling capability
• Instant cure

Close

• High gloss finishes for a hard, clear, and waterproof coat
• Repairing and filling cracks, inclusions, voids, and knots in wood
• Woodturning and knife handle finishes for a hard, clear, and waterproof coat
• Wicking into and stabilizing guitar frets

• 2 mPa·s viscosity
• Very Thin adhesive
• 0.002" gap filling capability
• Instant cure

Medium CA Glue

The EM-150 is a general-purpose adhesive that possesses an oil-like viscosity. It has certain properties of both the thin and thick, such as the ability to penetrate narrow slots, bond closely-fitted parts, and fill small gaps. Similar to the thinner CAs, the EM-150 is also used as a finish by applying several coats, sanding, and then polishing to a high gloss.

Used For:

• Bonding of harder wood (basswood and spruce), loosely fitted joints, hobby models
• Lapidary applications
• High gloss polish for stones and petrified wood
• Pen making
• Treating soft porous stones by creating a tough and non-porous exterior
• Bonding fiberglass to a variety of materials
• Marble, Granite and Quartz repair

• 150 mPa·s viscosity
• Medium adhesive
• 0.006" gap filling capability
• Bonding time: 10-20 seconds

Thick CA Glue

The EM-2000 is known as the "gap filler" adhesive. Its high viscosity allows filling of large voids and gaps. Each drop of EM-2000 remains stationary even when applied on downward sloping surfaces. Curing time is extended to give users longer positioning time for more precise bonding. Depending on the working material, bonding time may exceed more than two minutes. In all such instances, Starbond Accelerator is recommended to speed up bonding time.

Used For:

• Quick repairs for auto paint and body.
• Filling large gaps and holes.
• Plastic and metal model assembly
• Forming unique finishes by carving, sanding, and feathering.
• Used to bond together various kayak panels. (Faster set time than epoxy)
• Used to install cue tips onto pool cues. (Starbond accelerator recommended)
• Bonding fiberglass to a variety of materials •Coral fragging
• Shoe repairs •Marble, Granite and Quartz repair
• Taxidermy •Dental lab articulators

• 2000 mPa·s viscosity
• Thick adhesive
• 0.01 - 0.02" gap filling capability
• Bonding time: 60 seconds

Debonder

Removes cyandacrylate glue. Just spread on over unwanted glue and wait 5 to 10 minutes and wipe off with cloth. Repeat if neccassary. Always make sure to use in ventilated area and make sure not to contact with eyes or skin.

Spray-On Accelerator

Dries Glue Instantly!

When bonding, spray glue on one area and apply CA to the opposing area. Position Material together and hold for 20 to 30 seconds.

Whe filling cracks or voids apply glue first, then spray accelerator over glue. Glue will cure in 10 to 20 seconds.

5-Minute Epoxy Kit

Starbond 5-Minute Epoxy is a high-performance adhesive designed to make your life easier. It is an easy-to-use 2 part formula that offers reliable durability, dries clear, and holds up to the elements. Once mixed, this epoxy has an ideal viscosity that is thin enough to penetrate porous surfaces while also thick enough to bridge gaps for a strong and seamless bond.
›See more product details

5-Minute Epoxy Kit

Starbond 5-Minute Epoxy is a high-performance adhesive designed to make your life easier. It is an easy-to-use 2 part formula that offers reliable durability, dries clear, and holds up to the elements. Once mixed, this epoxy has an ideal viscosity that is thin enough to penetrate porous surfaces while also thick enough to bridge gaps for a strong and seamless bond.

Features:

• 1:1 mixing ratio means little-to-no measuring
• Dries clear, and holds up to the elements
• Thin enough to penetrate porous surfaces while also thick enough to bridge gaps
• Fast-setting
• Water and weather resistant
• Can handle heat up to 300° Fahrenheit.
• Environmentally friendly

Includes:

• Part A: 4 oz.
• Part B: 4 oz.
• 2 ea. Starbond 6-Pocket Mixing Palettes
• 1 ea. Mini Silicone Spatula

Fast-Setting & Water Resistant

Starbond 5-minute Epoxy is fast-setting, water and weather resistant, and can handle heat up to 300 degrees Fahrenheit. It is also environmentally friendly and specifically designed to be low VOC, so you can use it with confidence.

Extremely Easy to Use

This epoxy is also extremely easy to use! The 1:1 mixing ratio means that there is little-to-no measuring needed, just dispense the resin and hardener in equal parts and mix. You have around 5 minutes of working time, and it takes 24 hours to fully cure.

Experience the Starbond Difference

Whether you are a professional woodworker, hobbyist, or just looking for a reliable multi-purpose adhesive for your next creation this is the adhesive for you. Use it for repairs, maintenance, or to bond together your latest DIY crafting project. Try it today and experience the Starbond difference!

Close

Features:

• 1:1 mixing ratio means little-to-no measuring
• Dries clear, and holds up to the elements
• Thin enough to penetrate porous surfaces while also thick enough to bridge gaps
• Fast-setting
• Water and weather resistant
• Can handle heat up to 300° Fahrenheit.
• Environmentally friendly
• Includes Part A: 4 oz. and Part B: 4 oz.
• Also Includes two Starbond 6-Pocket Mixing Palettes and one Mini Silicone Spatula

2P-10 Adhesive Kit

2P-10 is a two part ten second bond adhesive. Just apply the adhesive, then spray the activator and stick it together for a strong permanent bond. The 2P-10 Kit comes with Joel, Thick, Medium and Thin Adhesives for bonding different surfaces, Activator for a fast permanent bond, and Debonder for removing glue residue.

• Complete starter kit in a hard shell case!
• Hard-shell case
• 10 second bonding
• 30 seconds to cure
• 4 different viscosities
• Fast, permanent bond
• Works on most surfaces

2P-10 Activator 12 oz. Aerosol

Fastcap 2P-10 Kit Adhesive System is an industrial grade instant glue. It is triple distilled and acidically modified to work specifically with wood. Cabinet makers and carpenters love it and refer to it as the ranch dressing of glue - they use it on everything! 2P-10 can be used on any material as long as it is clean and the surface is well prepared. With the Activator from FastCap you can easily accelerate curing of 2P-10 adhesive. 2P-10 is a two-part, 10 second bond adhesive. Just apply the adhesive, spray with activator, and press together for a strong permanent bond.

Titebond Instant Bond Accelerator 5.5 ounce Spray Can

Titebond Accelerator has been developed as a treating agent for use with Titebond's Instant Bond adhesives. If faster setting speeds are desired, Titebond's Accelerator will aid the curing process and give faster set times. It will allow for faster uniform curing. The accelerator will aid the bonding of porous materials such as wood. It is useful when bonding acidic surfaces or in low humidity conditions promoting consistent curing times. Using Accelerator will enable the adhesive to fill gaps up to 0.20".

Features:

• Designed for use with all titebond instant bond adhesives
• Accelerates the curing of titebond instant bond adhesives
• Especially effective for large gaps and very porous woods
• Useful when bonding acidic surfaces or in low humidity conditions
• Heptane-based solvent will not mar finishes or damage plastics