Glue & Accessories

Instant Bond Glue & Activator

Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. This adhesive is also very effective on a variety of materials and substrates.

Thin: Ideal for Wicking Hair Line Cracks
5 second handling - 3 second set Can be used with out activator

Medium: Designed to fill Knots & Voids
7 second handling - 5 second set Soak end grains to prevent splitting

Thick: Designed for Finish & Trim Carpentry
10 second handling - 8 second set Also ideal for MDF & Porous wood

Gel: Excellent for Filling Large Gaps
30second handling - 20 second set Also ideal for MDF & Porous wood

Activator: Accelerates the curing of adhesive with thin, medium, thick and gel with quick Professional results.

Instant Bond Adhesive Medium - Jet Black

Titebond Instant Bond Medium - Jet Black is an ethyl cyanoacrylate adhesive that provides professional-strength, permanent bonds to most common materials. This rubber-toughened formula is extremely impact-resistant and ideal for hiding imperfections, repairing cracks, and filling knots/voids in wood materials. With a longer working time of approximately 40 to 60 seconds (compared to other cyanoacrylates), it allows for precise application for complex projects.

Features:

• Fast set - Eliminates or reduces clamp time
• Unaffected by finishes
• 2 year shelf life
• Excellent heat and solvent-resistance
• Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
• Triple distilled for purity & consistency

Black Medium-Thick Super Glue - 2 oz

Starbond® "Knot-filler" Black Medium-Thick is the go-to black CA glue for those with knot problems in their wood. Known for flawless knot and void fills, this rubber-toughened formula flows thick (500–600 cps), stays put, and cures to a deep jet-black finish that elevates every piece. It’s not just a filler—it bonds with impact-resistant strength across wood, rubber, metal, glass, and more. Whether you’re sealing a knot or securing a component, it delivers clean, controlled application with a flexible, crack-proof hold.

Features:

• Signature black fills for knots, voids, and high-contrast inlays
• Flexible, high-strength bonds that resist shock and vibration
• Ideal for woodworking, speaker repair, R/C tires, and thread locking
• Includes clog prevention cap, extra applicator nozzle, (8) microtips and user guide

Black Medium Super Glue - 2 oz

Starbond® Black Medium CA Glue is a rubber-toughened adhesive built for clean fills, flexible strength, and detailed bonding. With a 15–20 second set time and 150 cps viscosity, this jet-black glue wicks effortlessly into tight cracks, small voids, and inlays—sealing them with a strong, impact-resistant hold. Perfect for accenting spalted wood, repairing small flaws, or locking in detailed parts, it blends into dark surfaces and polishes to a sleek, high-gloss finish. Trusted by makers for both precision and performance.

Features:

• Flows into fine cracks and voids for seamless, jet-black repairs
• Bonds inlays and tight-fitting parts with durable, flexible strength
• Ideal for woodworking, instruments, speaker builds, and hobby repair
• Includes clog prevention cap, extra applicator nozzle, (8) microtips and user guide

Super Fast Thin CA Glue

20 month shelf life The EM-02 is a wicking type adhesive. This watery-thin adhesive infiltrates hairline fractures, pores, and narrow slots filling any empty voids. The EM-02 is well suited for porous and fragile material such as soft wood (balsa), ceramics, unpolished rocks and minerals, and fossil bones. For inlay applications, it penetrates and stabilizes the material through capillary action. The EM-02 will immediately soak into a soft, porous object until it is fully saturated with the CA. In such instances, it is advised to use an accelerator to create an instant reaction so full saturation of the object is unnecessary. It is often used as a finish by applying several coats, sanding, and then polishing to a high gloss.
›See more product details

×

Instant Bond Glue & Activator

20 month shelf life The EM-02 is a wicking type adhesive. This watery-thin adhesive infiltrates hairline fractures, pores, and narrow slots filling any empty voids. The EM-02 is well suited for porous and fragile material such as soft wood (balsa), ceramics, unpolished rocks and minerals, and fossil bones. For inlay applications, it penetrates and stabilizes the material through capillary action. The EM-02 will immediately soak into a soft, porous object until it is fully saturated with the CA. In such instances, it is advised to use an accelerator to create an instant reaction so full saturation of the object is unnecessary. It is often used as a finish by applying several coats, sanding, and then polishing to a high gloss.

Used For:

• High gloss finishes for a hard, clear, and waterproof coat
• Repairing and filling cracks, inclusions, voids, and knots in wood
• Woodturning and knife handle finishes for a hard, clear, and waterproof coat
• Wicking into and stabilizing guitar frets
• Gluing and repairing guitar inlays on the headstock, body, and fretboard
• Fossil preparation through infiltration and stabilization of the fossil before extraction
• Repairing small cracks in stone
• Metal and turquoise inlays
• Jewelry manufacturing and repair
• Furniture refinishing and antique repair
• Bonding fiberglass to balsa wood

Specifications:

• 2 mPa·s viscosity
• Very Thin adhesive
• 0.002" gap filling capability
• Instant cure

Close

• High gloss finishes for a hard, clear, and waterproof coat
• Repairing and filling cracks, inclusions, voids, and knots in wood
• Woodturning and knife handle finishes for a hard, clear, and waterproof coat
• Wicking into and stabilizing guitar frets

• 2 mPa·s viscosity
• Very Thin adhesive
• 0.002" gap filling capability
• Instant cure

Medium CA Glue

The EM-150 is a general-purpose adhesive that possesses an oil-like viscosity. It has certain properties of both the thin and thick, such as the ability to penetrate narrow slots, bond closely-fitted parts, and fill small gaps. Similar to the thinner CAs, the EM-150 is also used as a finish by applying several coats, sanding, and then polishing to a high gloss.

Used For:

• Bonding of harder wood (basswood and spruce), loosely fitted joints, hobby models
• Lapidary applications
• High gloss polish for stones and petrified wood
• Pen making
• Treating soft porous stones by creating a tough and non-porous exterior
• Bonding fiberglass to a variety of materials
• Marble, Granite and Quartz repair

• 150 mPa·s viscosity
• Medium adhesive
• 0.006" gap filling capability
• Bonding time: 10-20 seconds

Thick CA Glue

The EM-2000 is known as the "gap filler" adhesive. Its high viscosity allows filling of large voids and gaps. Each drop of EM-2000 remains stationary even when applied on downward sloping surfaces. Curing time is extended to give users longer positioning time for more precise bonding. Depending on the working material, bonding time may exceed more than two minutes. In all such instances, Starbond Accelerator is recommended to speed up bonding time.

Used For:

• Quick repairs for auto paint and body.
• Filling large gaps and holes.
• Plastic and metal model assembly
• Forming unique finishes by carving, sanding, and feathering.
• Used to bond together various kayak panels. (Faster set time than epoxy)
• Used to install cue tips onto pool cues. (Starbond accelerator recommended)
• Bonding fiberglass to a variety of materials •Coral fragging
• Shoe repairs •Marble, Granite and Quartz repair
• Taxidermy •Dental lab articulators

• 2000 mPa·s viscosity
• Thick adhesive
• 0.01 - 0.02" gap filling capability
• Bonding time: 60 seconds

Super Glue Remover (CA Debonder) - 2 oz

Starbond® Super Glue Remover is your safety net for slip-ups, spills, and stubborn dried glue. Formerly known as CA Glue Debonder, this upgraded formula is engineered for powerful removal without harshness—perfect for cleanup, skin-safe separation, and surface resets. With a thicker viscosity, it stays in place longer for effective removal of dried CA glue without rapid evaporation. Whether you're cleaning up spills, separating stuck fingers, or undoing a dried bond, this remover makes the process quick, easy, and worry-free.

Features:

• Skin-safe, propylene carbonate-based formula
• Removes dried glue from hands, tools, and most surfaces
• Thick consistency + long brush for controlled, waste-free application

Super Glue Pump Accelerator

Starbond® Super Glue Pump Accelerator is made for frequent users who demand speed, precision, and control. This solvent-based CA glue activator dramatically reduces curing time—perfect for thicker adhesives, black CA glue, and repairs in cold or dry environments. Use before or after glue application to prime, set, and lock in fast, reliable bonds. The pump style offers less spray pressure for cleaner application. Whether you’re filling large gaps or fine-tuning a joint, this formula cures in seconds while preventing hazing or whitening, giving you a strong, clear finish every time.

• Speeds up bonding for thick and black CA glues
• Precision-friendly pump format for controlled application
• Slower-drying formula prevents hazing for a clean, polished finish

5-Minute Epoxy Kit

Starbond 5-Minute Epoxy is a high-performance adhesive designed to make your life easier. It is an easy-to-use 2 part formula that offers reliable durability, dries clear, and holds up to the elements. Once mixed, this epoxy has an ideal viscosity that is thin enough to penetrate porous surfaces while also thick enough to bridge gaps for a strong and seamless bond.
›See more product details

5-Minute Epoxy Kit

Starbond 5-Minute Epoxy is a high-performance adhesive designed to make your life easier. It is an easy-to-use 2 part formula that offers reliable durability, dries clear, and holds up to the elements. Once mixed, this epoxy has an ideal viscosity that is thin enough to penetrate porous surfaces while also thick enough to bridge gaps for a strong and seamless bond.

Features:

• 1:1 mixing ratio means little-to-no measuring
• Dries clear, and holds up to the elements
• Thin enough to penetrate porous surfaces while also thick enough to bridge gaps
• Fast-setting
• Water and weather resistant
• Can handle heat up to 300° Fahrenheit.
• Environmentally friendly

Includes:

• Part A: 4 oz.
• Part B: 4 oz.
• 2 ea. Starbond 6-Pocket Mixing Palettes
• 1 ea. Mini Silicone Spatula

Fast-Setting & Water Resistant

Starbond 5-minute Epoxy is fast-setting, water and weather resistant, and can handle heat up to 300 degrees Fahrenheit. It is also environmentally friendly and specifically designed to be low VOC, so you can use it with confidence.

Extremely Easy to Use

This epoxy is also extremely easy to use! The 1:1 mixing ratio means that there is little-to-no measuring needed, just dispense the resin and hardener in equal parts and mix. You have around 5 minutes of working time, and it takes 24 hours to fully cure.

Experience the Starbond Difference

Whether you are a professional woodworker, hobbyist, or just looking for a reliable multi-purpose adhesive for your next creation this is the adhesive for you. Use it for repairs, maintenance, or to bond together your latest DIY crafting project. Try it today and experience the Starbond difference!

Close

Features:

• 1:1 mixing ratio means little-to-no measuring
• Dries clear, and holds up to the elements
• Thin enough to penetrate porous surfaces while also thick enough to bridge gaps
• Fast-setting
• Water and weather resistant
• Can handle heat up to 300° Fahrenheit.
• Environmentally friendly
• Includes Part A: 4 oz. and Part B: 4 oz.
• Also Includes two Starbond 6-Pocket Mixing Palettes and one Mini Silicone Spatula

2P-10 Activator 12 oz. Aerosol

Fastcap 2P-10 Kit Adhesive System is an industrial grade instant glue. It is triple distilled and acidically modified to work specifically with wood. Cabinet makers and carpenters love it and refer to it as the ranch dressing of glue - they use it on everything! 2P-10 can be used on any material as long as it is clean and the surface is well prepared. With the Activator from FastCap you can easily accelerate curing of 2P-10 adhesive. 2P-10 is a two-part, 10 second bond adhesive. Just apply the adhesive, spray with activator, and press together for a strong permanent bond.

Titebond Instant Bond Accelerator 5.5 ounce Spray Can

Titebond Accelerator has been developed as a treating agent for use with Titebond's Instant Bond adhesives. If faster setting speeds are desired, Titebond's Accelerator will aid the curing process and give faster set times. It will allow for faster uniform curing. The accelerator will aid the bonding of porous materials such as wood. It is useful when bonding acidic surfaces or in low humidity conditions promoting consistent curing times. Using Accelerator will enable the adhesive to fill gaps up to 0.20".

Features:

• Designed for use with all titebond instant bond adhesives
• Accelerates the curing of titebond instant bond adhesives
• Especially effective for large gaps and very porous woods
• Useful when bonding acidic surfaces or in low humidity conditions
• Heptane-based solvent will not mar finishes or damage plastics