Layout & Measuring

24" Clear Flex Center Finding Ruler

This transparent and flexible center finder ruler makes it super quick and super easy without having to do any math to find the center. The exact center is clearly marked with a circle and an indexed center point arrow to make it easy to see. The ruler is flexible which means it can be used almost anywhere including uneven and curved surfaces.
›See more product details

×

24" Clear Flex Center Finding Ruler

This transparent and flexible center finder ruler makes it super quick and super easy without having to do any math to find the center. The exact center is clearly marked with a circle and an indexed center point arrow to make it easy to see. The ruler is flexible which means it can be used almost anywhere including uneven and curved surfaces. While you could use the old fashion "3 step rule" where you measure the width, divide that measurement in half and you would use that measurement to locate and mark the center. Why not take all that down to one simple step by using the Clear Flex Center Finder Ruler. Simply align the ruler up at the same measurement on both edges of your project and the center point on the ruler marks the spot! It really is that easy!

24" Clear Flex Center Finder

Finally a ruler that can be used for most any project! From scrap booking to woodworking and everything in between, you are sure to find this ruler super useful! You'll be able to find the center on just about any surface.

Super Easy to Use!

It doesn't get much easier to use than this. Line the ruler up so that the measurement marks are the same on both edges of the surface you are measuring, then make a mark at the center point of the ruler and your done! Its that easy!

Woodworkers Rejoice!

For years, woodworkers have been doing the math to find the center. Now we have a clear, flexible center finder ruler that allows you to see exactly where your marking which makes the centering process even easier and best of all you don't have to do the math, the center finder does it for you!

Scrap Books

If you're into scrap booking then you already know its all about the presentation. The Clear Flex Center Finding ruler helps you present your pics and designs by helping you quickly and easily center the pictures and designs to small or large paper stock.

Arts, Crafts, Wood, Quilts, Fabric, Paper or Even Plastic

This center finder is the perfect ruler for just about anyone who enjoys being creative but also accurate when needed. We all need to find the center from time to time and the Clear Flex Center Finder Ruler will help you accomplish this and more.

Close

Features:

• Clear & flexible
• Makes the centering process easier
• Super easy to use
• Simply align the ruler up at the same measurement on both edges of your project and the center point on the ruler marks the spot
• 24" length

Stainless Steel Center Finder Rule

Find the center point quickly and accurately with this handy steel center finding ruler You simply align this center finding ruler so that the same measurement appears on both sides of the zero mark. These rigid stainless steel rules make the job of finding the center of any piece of wood very easy. The zero is in the middle with scales in 1/32 “. These rules have a second scale which allows them to be used as regular rulers. They are made of stainless steel with a hard chrome finish.
›See more product details

×

Stainless Steel Center Finder Rule

Find the center point quickly and accurately with this handy steel center finding ruler You simply align this center finding ruler so that the same measurement appears on both sides of the zero mark. These rigid stainless steel rules make the job of finding the center of any piece of wood very easy. The zero is in the middle with scales in 1/32 “. These rules have a second scale which allows them to be used as regular rulers. They are made of stainless steel with a hard chrome finish.

Find the Center on Rectangular, Square or Round Objects

When trying to find the center on rectangular, square or even round objects it can sometimes be challenging at best. While you could always measure the length, divide the number in half then measure to that point and mark it, why waste that valuable time.

Super Quick and Super Easy

The handy center finder ruler makes it super quick and super easy without having to do any math to find center. The exact center is clearly marked with a circle and a fine point arrow to make it easy to see. To use the ruler, simply line the ruler up so that the increments are the same on both outside edges of the object your are measuring. Make your mark at the center point and there you have it! It literally takes seconds to find center with this super easy to use ruler.

Square Objects

Simply align the rule on the corners to find the center of a square or rectangular object with ease

Round Objects

Align the rule on the edges of the circular object to find the center

Cabinet or General Home Use

Perfect for finding center on frames, cabinets, doors and more!

1mm Thick Stainless Steel

The ruler is made 1mm thick stainless steel and flexes just the right amount for most any project while still remaining rigid enough so its not flopping all over when in use. Starting from “0” in the middle of the ruler, the scale is in 32nds.

Close

12" Center Finding Ruler #1365: (Shown in image)

• Top scale is center finding ruler
• Bottom scale is standard 12" ruler
• Ruler reads in 1/16" increments

24" Center Finding Ruler #1366:

• Top scale is center finding ruler
• Bottom scale is standard 24" ruler
• Ruler reads in 1/16" increments

12" Center Finding Rule

The INCRA Bend Rule is precisely what you need for layout and measurement along the edge of a board or other work piece. We've put micro-fine marking holes at every scale line to instantly locate your sharp pencil point or scribe exactly on target with zero uncertainty and no eye strain! The 90° shape holds it snugly in place while the two scale surfaces let you mark and measure on the top, edge and corners simultaneously! There are even two vertical end scales for drawing precision parallel lines relative to the edge of your work. Find the exact center of any work piece up to 12" wide.
›See more product details

×

12" Center Finding Rule

The INCRA Bend Rule is precisely what you need for layout and measurement along the edge of a board or other work piece. We've put micro-fine marking holes at every scale line to instantly locate your sharp pencil point or scribe exactly on target with zero uncertainty and no eye strain! The 90° shape holds it snugly in place while the two scale surfaces let you mark and measure on the top, edge and corners simultaneously! There are even two vertical end scales for drawing precision parallel lines relative to the edge of your work.

Find the exact center of any work piece up to 12" wide

Find the exact center of any work piece up to 12" wide. In addition to top and bottom micro-fine marking holes at every 1/32" it also has a built-in protractor with guide slots at every 45°, 30°, 22.5°, and 5° intervals

Features

• 12" Centering Rule with protractor feature and precision marking holes at every 1/32"
• Micro-fine marking holes and slots place your mark exactly on target
• Mark the center of your work piece quickly and accurately

Close

Features:

• 12" Centering Rule with protractor feature and precision marking holes at every 1/32"
• Micro-fine marking holes and slots place your mark exactly on target
• Mark the center of your work piece quickly and accurately

Marking Rules

At first glance you might think you are looking at an ordinary ruler. But look closer and you will see micro-fine marking holes and slots every 1/16", 1/32" and 1/64" to instantly locate a sharp pencil point or scribe EXACTLY where you want it. No more squinting as you try to line up your pencil on that blur of lines along the edge of your old steel rule. Who would have thought there was so much room for improvement in the common ruler. There WAS and INCRA RULES is it! Available in 3", 6", 12" and 18" lengths. Engraved stainless steel.

Features:

• Micro-fine marking holes and slots at every 1/16", 1/32" and 1/64" instantly locate a sharp pencil point or scribe EXACTLY where you want it.
• Instantly mark your position with zero uncertainty, zero parallax and zero eye strain
• Flexible structure for working on curved surfaces
• Ultra thin for ultra precision
• Common ruler?...NO. Common sense?...Yes!

Bend Rules

The INCRA Bend Rule is precisely what you need for layout and measurement along the edge of a board or other work piece. We've put micro-fine marking holes at every scale line to instantly locate your sharp pencil point or scribe exactly on target with zero uncertainty and no eye strain! The 90° shape holds it snugly in place while the two scale surfaces let you mark and measure on the top, edge and corners simultaneously! There are even two vertical end scales for drawing precision parallel lines relative to the edge of your work. 

Features:

• Measure on the top, edge and corners simultaneously
• Micro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-inch
• 90 degree shape holds it snugly in place, ultra thin for ultra precision

Precision Marking T-Rule

Precise, versatile, and easy-to-use are the words which best describe the Incra Precision Marking T-Rule. Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy. There are micro-fine marking holes and slots at every 1/16-, 1/32-, and 1/64-inch scale position to instantly locate your sharp pencil or scribe exactly on target with zero uncertainty. The Incra T-Rule makes it very easy to draw exact lines in either direction, and with zero uncertainty and no eye strain. Other features include 0- to 3-inch height markings on the end in 32nds, and the option of marking holes every 1/100-inch.

Features:

• Precise, versatile, easy-to-use
• Micro-fine marking holes and slots
• Scribe exactly on target with zero uncertainty
• Set to every scale position

Rule Set

Each set includes the Precision Marking Rule, Precision T-Rule, and Precision Bend Rule, along with a fine (0.5mm) marking pencil.

Micro-fine guide holes and slots at every 1/16", 1/32" and 1/64" scale position instantly locate your sharp pencil or scribe at the exact measurement with zero uncertainty and no eye strain! Our Professional T-Rules even offer marking holes every 1/100". This is unmatched in the industry.

Each 6", 12", or 18" Set Includes:

• 1 ea. Marking Rule
• 1 ea. Bend Rules
• 1 ea. Precision Marking T-Rule
• 1 ea. FREE Pencil

Hook Rule

Perfect measurements every time! This stainless steel hook rule simply catches on the end of a board to give you exact and precise measurements. Perfect for measuring of the end or the edge of a board.

Features:

• Stainless steel
• Perfect for measuring of the end or the edge of a board

Hook Rules

These high quality 6" & 12" hook rules are made from hardened and tempered Stainless Steel and is precision etched for long life and readability. Calibrations are on both sides with 1/8 Inch and 1/16" increments on one side and 1/32" and 1/64" on the other side. Packaged in a protective vinyl sleeve.

Features:

• Made from hardened and tempered Stainless Steel
• Precision etched for long life and readability
• 1/8 Inch and 1/16" increments on one side and 1/32" and 1/64" on the other side
• Packaged in a protective vinyl sleeve
• Available in 6" & 12"

Digital Angle Rule 200mm

Two x 7 inch (400mm) rule digital angle rule that calculates angles quickly and accurately and is ideal for woodworking, construction and machining.

Features:

• Digital display for angles.
• Stainless steel rule with metric/imperial scale, scale length 200mm and 7 inch.
• Measuring range from 000.0 deg to 360.0 deg, with accuracy of 0.3 deg.
• Rule locking function.
• Easy operation with two press buttons.
• Auto-shut off in 6 minutes.

Includes:

• 1 ea. Trend® Digital Angle Rule 200mm DAR/200

Note:
Also comes in 18-1/2", See Below item# 10396

Digital Angle Rule 500mm

Two x 18-1/2 inch (960mm) rule digital angle rule that calculates angles quickly and accurately and is ideal for woodworking, construction, and machining.

Features:

• Digital display for angles.
• Stainless steel rule with metric/imperial scale, scale length 500mm and 18-1/2 inch.
• Measuring range from 000.0 deg to 360.0 deg, with accuracy of 0.3 deg.
• Rule locking function.
• Easy operation with two press buttons.
• Auto-shut off in 6 minutes.

Ruler Marking Gauge

Note: Ruler Not Included

Made from aluminum, this handy device allows you to convert most shop rulers into a convenient marking gauge. The single adjustment knob allows you to make quick adjustments for depth, parallelism and squareness. The smooth fence like face runs across the edge of your piece you are marking for accurate markings every time. Simply place your ruler in between the two guide sides and secure with the locking knob and your ready to go. The ruler marking guide can be used on rulers from 7/8" wide to 1-1/8" wide.

Features:

• Made of aluminum - converts most shop rulers into a convenient marking gauge
• Single adjustment knob
• Ruler marking guide can be used on rulers from 7/8" wide to 1 1/8" wide
• Make adjustments for depth, parallelism and square ness
• Smooth face runs across the edge of your piece for accurate markings