Power Tools

Precision Circular Saw

Strong and lightweight construction. Laser sighting for accuracy and safety. Powerful 1800W / 2-1/2hp motor makes light work of tough cutting tasks. Bevel cuts from 0°-45°. Ergonomically designed casings and handles for operator comfort.

Features:

• Laser line generator for increased accuracy, safety and maximum productivity
• Rubber-coated return lever for easy access and control of the lower guard
• Front bail handle offers greater grip and control at various operating angles
• Bevelling to 45° increases range of adjustment
• Quick access brushes enables brushes to be changed quickly and easily
• Dust extraction port for easy connection to a dust collection system
• 1800W / 2-1/2hp motor provides enough power for even the toughest timbers

Technical Specification:

• Bevel Range: 0, 15, 30 and 45°
• Blade Diameter: 185mm
• Blade Type: TCT
• Bore Diameter: 20mm
• Cut Capacity - 45° 39mm
• Cut Capacity - 90° 63mm
• Cut Capacity - Max 63mm
• Depth Adjustment: 0° - 63mm and 45° - 39mm
• Material - Primary Construction: Aluminium
• Max Cutting Depth: 63mm
• No Load Speed: 5,000rpm
• Power: 1800W
• Product Height: 290mm
• Product Length: 325mm
• Product Weight: 5.1kg
• Product Width: 260mm
• Sound Power LW: 109.1dB
• Sound Pressure LP: 98.1dB
• Teeth / Segments Per Inch: 24 TCT

Plunge Track Saw 1400W

Easily accessible shaftlock aids fast, convenient blade-change. Plunge lock for safety enhancement. Soft-grip handles. Fits to guide track system for smooth, precise straight and bevel cutting. On-board tool storage. Variable speed with soft start and constant speed. Bevel range of 0-48°.

Features:

• Mode selector for quick change between free plunge, scribe, and blade change modes
• Scribe mode eliminates splintering and tear-out
• Easy change carbon brushes to further extend the product life-span
• Precision bevel cut adjustment of bevel angle from 0 – 48º
• Dual bevel quadrants provide stability for precision cutting
• Variable speed, soft start and constant speed electronics optimised for required cutting conditions for every material
• Dual alignment cams fine tune the fit between the saw and track for exact cuts
• Anti-kickback safety feature prevents the saw from jolting when performing plunge cuts
• Guide rail track lock adds stability when performing bevel cuts
• Precise cutting depth adjustment can be set to a maximum of 54mm / 2-1/8"
• Width of cut indicators for exact positioning of blade on the work piece
• Fast blade replacement easily accessed through the blade guard
• Highly efficient dust extraction with universal vacuum system adaptor and 360° outlet
• Blade-change mode and power switch lock-out for easy blade changes
• Plunge lock secures the blade inside the guard when not in use
• Non-slip rubber over-moulded grip offers increased support, safety and control

Technical Specification:

• Bevel Range: 0 - 48°
• Blade Diameter: 165mm
• Blade Type: 60 TCT
• Bore Diameter: 20mm
• Electronic Speed Maintenance: Yes
• Material - Primary Construction: Aluminium
• No Load Speed: 2,000 - 5,300rpm
• Power: 1400W
• Product Height: 250mm
• Product Length: 335mm
• Product Weight: 5.51kg
• Product Width: 235mm
• Sound Power LW: 94.8dB
• Sound Pressure LP: 83.8dB

Includes:

• 1 ea. Triton TTS1400 Plunge-Cut Track Saw
• 1 ea. Carbon Brush Pair
• 1 ea. 6-1/2'' 60T Saw Blade
• 1 ea. Dust Outlet Adapter
• 1 ea. Instruction Manual

Track
For use with the Triton Track Saw TTS1400.

Length of 1500mm track. For use with the Triton Track Saw TTS1400.

Technical Specification:

• Product Height: 13mm
• Product Length: 1500mm
• Product Weight: 2.18kg
• Product Width: 190mm

Includes:

• 1 ea. Triton TTST1500 59" Track Saw Track

Track Pack & Connectors
For use with the Triton Track Saw TTS1400.

Pair of 700mm track lengths with a pair of track connectors. For use with the Triton Track Saw TTS1400.

Technical Specification:

• Product Height: 10.5mm
• Product Length: 700mm
• Product Weight: 2.53kg
• Product Width: 186mm

Includes:

• 2 ea. Triton TTSTP 27-1/2'' Tracks2 ea.
• 2 ea. Connectors

Work Clamps TTSWC
For use with the Triton Track Saw TTS1400.

Pair of Work Clamps to secure the track on the workpiece. For use with the Triton TTS1400 1400W Plunge Track Saw. Each clamp needs 25mm (1") of track length.

Technical Specification:

• Product Height: 190mm
• Product Length: 320mm
• Product Weight: 0.763kg
• Product Width: 30mm

Includes:

• 2 ea. Triton TTSWC Work Clamps

Angle Guide
For use with the Triton Track Saw TTS1400.

Set angles up to +/- 55° for precision cutting. For use with the Triton Track Saw TTS1400. Please note mitre needs more than 140mm (5-1/2”) of track length with or without work clamp.

Track Connectors Pair
For use with the Triton Track Saw TTS1400.

Pair of Track Connectors to extend overall track length. For use with the Triton Track Saw TTS1400.

Includes:

• 2 ea. Triton TTSTC Track Connectors

Rip-Cut™

Turn an ordinary circular saw into a precision edge-guided cutting tool
Great projects start with high-quality cuts and you can make those cuts more easily than you ever imagined, using your circular saw plus the Rip-Cut™ Circular Saw Edge Guide. The Kreg Rip-Cut™ turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut™, you can cut with the confidence you want and the precision you need.
›See more product details

×

Rip-Cut™

Turn an ordinary circular saw into a precision edge-guided cutting tool
Great projects start with high-quality cuts and you can make those cuts more easily than you ever imagined, using your circular saw plus the Rip-Cut™ Circular Saw Edge Guide. The Kreg Rip-Cut™ turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut™, you can cut with the confidence you want and the precision you need.

Features:

• Make rip cuts and crosscuts up to 24" wide
• Cut multiple pieces to the same size with just one setup
• Use the oversize circular saw guide for precise control throughout the cut
• Eliminate need for marking, measuring, and layout lines
• Take your saw to the material instead of having to take your material to the saw
• Universal Sled accepts most circular saws — left or right blade
• Reversible edge guide for left- or right-handed use

Includes:

• (1) Universal Saw Sled
• (1) Aluminum Guide Rail
• (1) Precision Edge Guide
• Owner's Manual

Not intended for use with worm drive saws.

Not recommended for saws with a plastic upper blade guard, as it can affect accuracy.

Straight, Accurate, Repeatable Cuts

The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. All you have to do is lock the saw in at the measurement you want — up to 24" — using the built-in measuring scale, and then make your cut.

Built-in Measuring Scale

With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.

The Rip-Cut circular saw guide is very easy to use

Simply mount your saw to the Universal Sled — it accepts most left-blade or right-blade saws — and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.

Note: Not intended for use with worm drive saws.
Not recommended for saws with a plastic upper blade guard, as it can affect accuracy.

Close

Straight, accurate, repeatable rip cuts and crosscuts made easy

• Make rip cuts and crosscuts up to 24" wide
• Cut multiple pieces to the same size with just one setup
• Use the oversize edge guide for precise control throughout the cut
• Eliminate need for marking, measuring, and layout lines
• Take your saw to the material instead of having to take your material to the saw
• Universal Sled accepts most circular saws
• Reversible edge guide for left/right hand use

Accu-Cut™

Transform your circular saw into a high-performance, track-guided cutting system
Start projects right by making straight, accurate, splinter-free cuts with your circular saw and the Accu-Cut™ Circular Saw Track Guide. It rips, crosscuts and makes angled cuts up to 50" long in plywood, MDF, and other large panels with super-simple setup, precise accuracy, and amazing control.
›See more product details

×

Accu-Cut™

Transform your circular saw into a high-performance, track-guided cutting tool
Start projects right by making straight, accurate, splinter-free cuts with your circular saw and the Accu-Cut™ Circular Saw Track Guide. It rips, crosscuts and makes angled cuts up to 50" long in plywood, MDF, and other large panels with super-simple setup, precise accuracy, and amazing control.

Features:

• Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels
• Simply align the Guide Track with your marks to make accurate cuts
• Hold track in place without clamps thanks to anti-slip guide strips
• Prevent splintering with anti-chip strips that support material during the cut
• Begin cuts easily with a Starting Block that the supports saw and allows normal blade guard operation
• Mount almost any circular saw—left or right blade—to the
• Universal Sled Universal Sled is compatible with the Kreg Rip-Cut™
• Take your saw to the material instead of having to take your material to the saw

Includes:

• (1) Universal Saw Sled
• (2) 26.5" Aluminum Guide Tracks
• (2) Track Connectors
• (1) Starting Block
• (1) Track Indicator Clip
• Owner's Manual

Not intended for use with worm drive saws.

Not recommended for saws with a plastic upper blade guard, as it can affect accuracy.

The Accu-Cut™ Design Makes it Simple to Set Up

The Accu-Cut™ guides your circular saw along an aluminum track that keeps the saw moving in a straight line easily. The Accu-Cut™ design makes it simple to set up by just aligning the track with your cut line. No clamps are required to hold the track in place thanks to dual guide strips. They feature an anti-slip coating to prevent slipping, and an anti-chip feature to prevent splintered cuts. Plus, the track makes it easy to make straight cuts on sheets that don't have a straight, flat edge.

Portable and Effective

Circular saws don’t have effective guides that keep them moving straight along a cut line. Plus, it can be difficult to see the blade’s cutting path. Together, these things make it challenging to keep a saw on your desired cut. Circular saws also often cause splintering of face veneers. The Accu-Cut™ solves these problems. The Accu-Cut™ is portable, too, so you can take your saw to the workpiece and cut with precision, rather than having to handle heavy sheets on a table saw.

Easy and Intuitive for a Novice, but Robust Enough for Professionals

The Accu-Cut™ is easy and intuitive for a novice to use, but robust enough for professionals. Because it eliminates the need to keep the saw straight and manually guide the saw along a cut line, the Accu-Cut™ is ideal for less-experienced users. Accu-Cut™ also makes professionals faster and more productive because it makes a variety of cuts quickly and easily in the shop and on the job site.

Note: The Accu-Cut is not compatible with the Kreg Plunge Saw.
Not intended for use with worm drive saws.
Not recommended for saws with a plastic upper blade guard, as it can affect accuracy.

Close

Straight, accurate, splinter-free cuts made easy

• Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels
• Hold track in place without clamps thanks to anti-slip guide strips
• Prevent splintering with anti-chip strips that support material during the cut
• Mount almost any circular saw—left or right blade—to the Universal Sled
• Universal Sled is compatible with the Kreg Rip-Cut™
• Take your saw to the material instead of having to take your material to the saw

Accu-Cut™ Expansion Pack

Double the cutting capacity of your Accu-Cut™ with the Accu-Cut Expansion Pack. It connects easily to your Accu-Cut to deliver the same straight, accurate, splinter-free performance on cuts up to 100" long. Make the cuts you need at any length and angle on panels, plywood, and MDF.
›See more product details

×

Accu-Cut™ Expansion Pack

Double the cutting capacity of your Accu-Cut™ with the Accu-Cut Expansion Pack. It connects easily to your Accu-Cut to deliver the same straight, accurate, splinter-free performance on cuts up to 100" long. Make the cuts you need at any length and angle on panels, plywood, and MDF.

Features:

• Double the cutting capacity of the Accu-Cut by adding two more sections of track to make cuts up to 100" long
• Easily and quickly break down panels and plywood with a circular saw at any angle
• Same straight, accurate, splinter-free performance as the Accu-Cut
• Make the cuts you need – anywhere – by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location
• No clamps needed thanks to anti-slip guide strips that keep the track in place through the entire cut

Includes:

• (2) 26.5" Aluminum Guide Tracks
• (6) Steel Track Connectors
• (8) Accu-Cut™ Guide Strips
• Owner's Manual

Compatibility:

• Kreg Accu-Cut™
• Kreg AAccu-Cut™ Replacement Guide Strips
• Kreg ATrack Clamps

Get more from your Accu-Cut™ with an Accu-Cut™ Expansion Pack with extended-length track guide





-The Accu-Cut is not compatible with the Kreg Plunge Saw.

-Not intended for use with worm drive saws.

-Not recommended for saws with a plastic upper blade guard, as it can affect accuracy.

Consistent, Dependable Performance That You Expect from the Accu-Cut™

The Accu-Cut Expansion Pack brings the same consistent, dependable performance to your projects that you expect from the Accu-Cut – but allows you to guide your circular saw along an even longer aluminum track for support through the entire cut. The anti-slip, anti-chip guide strips extend through all four track pieces to bring the same tearout protection and stability to your cuts, no matter the length.

Transform Your Accu-Cut Into a High-Performance, 100" Track Guide

It’s easy to transform your Accu-Cut into a high-performance, 100" track guide with the Accu-Cut Expansion Pack. Simply connect the two guide tracks to your Accu-Cut whenever you need to make longer cuts. Take your saw and track to your workpiece to make any length cut – anywhere.

Note: -The Accu-Cut is not compatible with the Kreg Plunge Saw.

-Not intended for use with worm drive saws.

-Not recommended for saws with a plastic upper blade guard, as it can affect accuracy.

Close

Features:

• Double the cutting capacity of the Accu-Cut by adding two more sections of track to make cuts up to 100" long
• Easily and quickly break down panels and plywood with a circular saw at any angle
• Same straight, accurate, splinter-free performance as the Accu-Cut
• No clamps needed thanks to anti-slip guide strips that keep the track in place through the entire cut

Includes:

• 2 ea. 26.5" Aluminum Guide Tracks
• 6 ea. Steel Track Connectors
• 8 ea. Anti-Chip/Anti-Slip Guide Strips
• Owner’s Manual

Track Clamps

Track Clamps make perfect companions to the Accu-Cut Circular Saw Guide Track System. These easy-to-use clamps lock into place on the underside of the Accu-Cut track and Starting Block to offer additional holding power when needed such as when working with slick-surfaced sheet goods such as melamine-coated particleboard, or when cutting with a single length of track.

Track Clamps are also compatible with other Kreg products such as Clamp Trak, Universal Clamp Trak Kits, and Mini Trak. In addition, Track Clamps are handy for creating shop-built jigs and fixtures.

• Attach easily to Accu-Cut track and Starting Block when clamping is needed
• Durable molded construction
• Includes two clamps and mounting hardware
• Compatible with Kreg Clamp Trak, Universal Clamp Trak Kits, and Mini Trak
• Handy for creating shop-made jigs and fixtures
• 2 Track Clamps Included
• Conveniently packaged in Kreg Hardware Container - Small

Track Saw Combo

This Track Saw Combo includes the Rip-Cut and the Accu-Cut along with the 2 pack of track clamps. This combo will allow you to tackle large sheet of plywood , MDF or other large sheets to cut down to any desired size with precision and accuracy.

Includes:

• Kreg® Rip-Cut™
• Kreg® Accu-Cut™
• Kreg® Track Clamps (2 pack)

Square-Cut™

The Square-Cut™ allows you to quickly and accurately crosscut boards up to 12" (305mm) wide. Whether you’re using a circular saw or a jigsaw, the Square-Cut™ ensures great results. Just position the Square-Cut™ against the edge of your board and the built-in guide arm ensures that it sits perfectly square. Plus, the guide arm is adjustable, so you can set it to match the offset between the edge of the saw base and blade. Simply position the end of the guide arm on your cut line, and the Square-Cut™ will be automatically aligned to guide your saw through the cut. That eliminates the guesswork of having to align your blade by eye, and then hold the keep it on the line as you cut. With the Square-Cut™, you’ll get great crosscuts every time.

Great Crosscuts, Every Time

• Quickly and accurately crosscut boards up to 12" (305mm) wide
• Adjustable guide arm requires no trimming
• Switch back and forth between almost any circular or jig saw
• Rubber feet hold the guide securely in place for precision and control
• Low-profile design won’t interfere with saw
• Built-in roof pitch scale for cutting siding