Sharpening

×

Glass Plate Sharpening Kit

When sharpening your tools, one of the biggest challenges is to find a truly flat surface. Another challenge is finding a jig or tool holder to keep your tool edge at its current existing angle. The Fulton Glass Plate Sharpening System is the perfect solution to both of these issues and better yet, the system includes 4 different grits of sticky back (PSA) sandpaper to help you create the perfect cutting edge! With the super smooth, tempered glass plate that measures 9 7/8” wide x 11 13/16” long and a full 5/16” thick, you’ll be able to sharpen the vast majority of tools in your workshop. The Fulton glass plate is the perfect size to place 4 different grit sheets of sandpaper on it (two grits per side). This allows you to begin your honing process at a coarser grit and progressively step your way up to a finer grit for that perfect edge.

Easy to Apply, Easy to use

The peel and stick, silicone carbide sandpaper goes on quickly and is ready to use. Once you have all four grits applied to the glass plate, you're ready to sharpening!

Chisels, Plane Irons, Knives, Outdoor Tools and more!

The glass plate sharpening system allows you to sharpen almost any tool. You can use the handy and included honing guide for precise angle work or you can sharpen free hand depending on the tool your sharpening.

Wet or Dry...

With the Fulton Glass Plate Sharpening System you can hone your tools wet or dry! The sandpaper holds in place regardless and allows you to sharpen your tools efficiently.

Whats in the Box?

• 1 ea. Glass plate
• 1 ea. Honing guide
• 1 ea. black grip mat
• 2 ea. of 220 grit 4-1/2” x 11” sandpaper
  or 2 ea. of 800 grit - 4-1/2” x 11” sandpaper (depending on what system you purchase)
• 2 ea. of 320 grit 4-1/2” x 11” sandpaper
  or 2 ea. of 1200 grit - 4-1/2” x 11” sandpaper (depending on what system you purchase)
• 2 ea. of 400 grit 4-1/2” x 11” sandpaper
  or 2 ea. of 1500 grit - 4-1/2” x 11” sandpaper (depending on what system you purchase)
• 2 ea. of 600 grit 4-1/2” x 11” sandpaper
  or 2 ea. of 2000 grit - 4-1/2” x 11” sandpaper (depending on what system you purchase)

Included along with the glass plate is the super handy aluminum honing guide. The guide can hold blades, chisels or plane irons up to 3 1/16” in width and approximately 1/8” thick. The aluminum honing guide features an easy to adjust knob for tool width and an extra wide roller to make rolling the guide across the glass plate super smooth. This style of honing guide is one of the most popular style of honing guides available due to its ease of use and overall simplicity.

To properly hone your tools, you need an abrasive material. While you could always use an expensive wet stone or an even more expensive diamond stone, the Fulton Glass Plate Sharpening System utilizes traditional sandpaper to achieve the same result at a fraction of the cost. Apply the included silicone carbide, wet/dry 4 1/2” x 11” sticky back sheets to the plate glass in grit order make quick work of honing your workshop tools. Includes 2 ea. of the following grits: 800, 1200, 1500 and 2000.

This sharpening system also includes a black rubber mat that is designed to help keep the glass plate from sliding while you sharpen your tools and accessories. The mat is cut to be slightly larger than the glass plate. It can be used over and over again and when it gets too much build up of dirt and debris, simply clean it with warm soapy water