Shop Accessories

Drawer Slide Jig
with Cabinet Hardware Jig and Concealed Hinge Jig

Install Knobs and Pulls the Worry-Free Way – with Easy, Repeatable Accuracy Adjustable guides for accurate hole placement Built-in measuring scales for repeatable results Versatile for mounting single and multi-hole knobs Adjustable edge guide for easy positioning Make cabinet door installation easy! Get drill press accuracy with any hand drill Accurate hinge positioning with built-in indexing tabs Repeatable results with built-in measuring scales Reliable drilling with bit guide and stop collar Simple to use with any drill—no special tools needed Install Drawer Slides the Fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly Accurate slide positioning with built-in indexing tabs Repeatable results without measuring and marking Versatile for use in cabinets, cases, and more Reversible to mount slides to cabinet and drawer box Package includes all 3 jigs.

Specifications:

• Install Knobs and Pulls the Worry-Free Way – with Easy, Repeatable Accuracy
• Adjustable guides for accurate hole placement
• Reliable drilling with bit guide and stop collar
• Simple to use with any drill—no special tools needed
• Package includes all 3 jigs.

Includes:

• Drawer Slide Jig
• Cabinet Hardware Jig
• Concealed Hinge Jig

Drawer Slide Mounting Package

Drawer Slide Mounting Tool - #1519
Put an end to trying to mount drawer slides with one hand attempting to hold the slide in place while the other hand fiddles with the drill and screws. Attaching drawer slides - bottom mount or full -extension- perfectly parallel to the drawer opening is a snap with our Magnetic Drawer Slide Mounting Tool. The Strong, rae earth magnets hold most types of metallic drawer slides in place, freeing your hands for the rest of the job. The tool includes an easy-grip handle and provides a flat surface for easy clamping. Designed to work with both face-frame and faceless cabinets, the Mounting Tool features large openings in the side to give you clear access for driving screws.

Drawer Slide Mounting Brackets - #1520
For both face-frame and faceless cabinets, aligning the drawer box to full-extension slides is simple with our Drawer Mounting Brackets. Simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on brackets, then pull the slide to the front of the box and drive your screws. The 12" brackets work with most common drawer sizes, and the 1/8" tabs on the front of bracket are designed to fit under mounted full-extension slides for perfect placement every time. Made of rugged, impact-resistant plastic for years of service, these brackets and tool are a great addition to your workshop and toolbox.

Note: Color May Vary

Rip-Cut™

Turn an ordinary circular saw into a precision edge-guided cutting tool

Great projects start with high-quality cuts and you can make those cuts more easily than you ever imagined, using your circular saw plus the Rip-Cut™ Circular Saw Edge Guide. The Kreg Rip-Cut™ turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut™, you can cut with the confidence you want and the precision you need. The Rip-Cut™ easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut™ does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want up to 24" using the built-in measuring scale and then make your cut. With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut™ makes it easier to cut down large sheets by yourself. The Rip-Cut™ is very easy to use. Simply mount your saw to the universal sled, it accepts most left-blade or right-blade saws, and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.

Straight, accurate, repeatable rip cuts and crosscuts made easy

• Make rip cuts and crosscuts up to 24" wide
• Cut multiple pieces to the same size with just one setup
• Use the oversize edge guide for precise control throughout the cut
• Eliminate need for marking, measuring, and layout lines
• Take your saw to the material instead of having to take your material to the saw
• Universal Sled accepts most circular saws
  left or right blade
• Reversible edge guide for left or right handed use

Accu-Cut™

Transform your circular saw into a high-performance, track-guided cutting system

Straight, accurate, splinter-free cuts made easy Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels Simply align the Guide Track with your marks to make accurate cuts Hold track in place without clamps thanks to anti-slip guide strips Prevent splintering with anti-chip strips that support material during the cut Begin cuts easily with a Starting Block that the supports saw and allows normal blade guard operation Mount almost any circular saw—left or right blade—to the Universal Sled Universal Sled is compatible with the Kreg Rip-Cut™ Take your saw to the material instead of having to take your material to the saw

Straight, accurate, splinter-free cuts made easy

• Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels
• Simply align the Guide Track with your marks to make accurate cuts
• Hold track in place without clamps thanks to anti-slip guide strips
• Prevent splintering with anti-chip strips that support material during the cut
• Begin cuts easily with a Starting Block that the supports saw and allows normal blade guard operation
• Mount almost any circular saw—left or right blade—to the
• Universal Sled Universal Sled is compatible with the Kreg Rip-Cut™
• Take your saw to the material instead of having to take your material to the saw

Note: Circular Saw Not Included.

Accu-Cut™ Expansion Pack

Get more from your Accu-Cut™ with an Accu-Cut™ Expansion Pack

• Double the cutting capacity of the Accu-Cut by adding two more sections of track to make cuts up to 100" long
• Easily and quickly break down panels and plywood with a circular saw at any angle
• Same straight, accurate, splinter-free performance as the Accu-Cut
• Make the cuts you need – anywhere – by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location
• No clamps needed thanks to anti-slip guide strips that keep the track in place through the entire cut

Includes:

• 2 ea. 26.5" Aluminum Guide Tracks
• 6 ea. Steel Track Connectors
• 8 ea. Anti-Chip/Anti-Slip Guide Strips
• Owner’s Manual

Get expanded versatility from your circular saw and Accu-Cut™

Double the cutting capacity of your Accu-Cut™ with the Accu-Cut Expansion Pack. It connects easily to your Accu-Cut to deliver the same straight, accurate, splinter-free performance on cuts up to 100" long. Make the cuts you need at any length and angle on panels, plywood, and MDF.

The Accu-Cut Expansion Pack brings the same consistent, dependable performance to your projects that you expect from the Accu-Cut – but allows you to guide your circular saw along an even longer aluminum track for support through the entire cut. The anti-slip, anti-chip guide strips extend through all four track pieces to bring the same tearout protection and stability to your cuts, no matter the length.

It’s easy to transform your Accu-Cut into a high-performance, 100" track guide with the Accu-Cut Expansion Pack. Simply connect the two guide tracks to your Accu-Cut whenever you need to make longer cuts. Take your saw and track to your workpiece to make any length cut – anywhere.

Accu-Cut™ XL

Straight, accurate, splinter-free cuts made easy

• Get perfectly straight, accurate cuts every time with track-guided cutting
• Break down panels and plywood easily and quickly with cutting capacity up to 100"
• Splinter-free cuts with tearout protection from anti-chip guide strips
• Make the cuts you need anywhere by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location
• Easily attaches to your left-blade or right-blade circular saw, and removes easily
• No clamps needed thanks to anti-slip guide strips that keep the track in place through the entire cut

Includes:

• 1 ea. Universal Saw Sled
• 4 ea. 26.5" Aluminum Guide Tracks
• 6 ea. Steel Track Connectors
• 1 ea. Starting Block
• 8 ea. Anti-Chip/Anti-Slip Guide Strips
• 1 ea. Track Indicator Clip
• Detailed Setup and Usage Instructions

Transform your circular saw into a high-performance track-guided cutting tool for breaking down full sheets of plywood

Set your projects up for success by making straight, accurate, splinter-free cuts with the Accu-Cut™ XL Circular Saw Track Guide. It rips, crosscuts, and makes angled cuts up to 100" long in plywood, MDF, and other large panels with accuracy and control.

The Accu-Cut XL guides your circular saw along an extended-length aluminum track that holds the saw steady and keeps your cuts straight. The track guide is designed for simplicity: just mount your saw to the Universal Sled, align the Accu-Cut XL track to the cut line, and make the high-quality cuts you need. The anti-chip guide strips prevent splintering and tearout through the entire length of your cut. The same strips also feature an anti-slip surface that holds the track in place without clamps.

Track Clamps

Track Clamps make perfect companions to the Accu-Cut Circular Saw Guide Track System. These easy-to-use clamps lock into place on the underside of the Accu-Cut track and Starting Block to offer additional holding power when needed such as when working with slick-surfaced sheet goods such as melamine-coated particleboard, or when cutting with a single length of track.

Track Clamps are also compatible with other Kreg products such as Clamp Trak, Universal Clamp Trak Kits, and Mini Trak. In addition, Track Clamps are handy for creating shop-built jigs and fixtures.

• Attach easily to Accu-Cut track and Starting Block when clamping is needed
• Durable molded construction
• Includes two clamps and mounting hardware
• Compatible with Kreg Clamp Trak, Universal Clamp Trak Kits, and Mini Trak
• Handy for creating shop-made jigs and fixtures
• 2 Track Clamps Included
• Conveniently packaged in Kreg Hardware Container - Small

Square-Cut™

The Square-Cut™ allows you to quickly and accurately crosscut boards up to 12" (305mm) wide. Whether you’re using a circular saw or a jigsaw, the Square-Cut™ ensures great results. Just position the Square-Cut™ against the edge of your board and the built-in guide arm ensures that it sits perfectly square. Plus, the guide arm is adjustable, so you can set it to match the offset between the edge of the saw base and blade. Simply position the end of the guide arm on your cut line, and the Square-Cut™ will be automatically aligned to guide your saw through the cut. That eliminates the guesswork of having to align your blade by eye, and then hold the keep it on the line as you cut. With the Square-Cut™, you’ll get great crosscuts every time.

Great Crosscuts, Every Time

• Quickly and accurately crosscut boards up to 12" (305mm) wide
• Adjustable guide arm requires no trimming
• Switch back and forth between almost any circular or jig saw
• Rubber feet hold the guide securely in place for precision and control
• Low-profile design won’t interfere with saw
• Built-in roof pitch scale for cutting siding

Aluminum Straight Edge

Sometimes you need to have your work surface just right for your projects. Whether you’re a woodworker, metal worker or hobbyist, when you need a flat work surface you simply just need it. Finding an economical tool to check for flatness used to be quite the challenge. Not anymore! Introducing the lightweight and easy to use Fulton Aluminum straight edge. Use the straight edge to properly check for flatness, so you can see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working. The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even. The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even. The bars measure 3/8" thick by 1-3/4" tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. The Fulton Aluminum Straight edge is the perfect for any workshop where accuracy is a must!

Aluminum Straight Edge

Ideal for checking flatness of machinery, wet stones, and more!

• Perfect for checking flatness on anything around the shop
• Great for marking a perfect straight line
• Constructed of a single piece of aluminum
• Aluminum straight edge will not rush
• Approximately 1-7/8" tall by 7/16" thick
• Machined tolerance for flatness is.003" through the length of the bar
• Comes in 24" and 38" length
• Reads in inches and mm

Plastic Jig Handle

Make your own custom clamping , holding device and push blocks you'll save money and work more efficiently.

Features:

• Comfortable grip design
• Molded plastic