Table Saw Accessories

4-3/8" x 36 Tooth Finish Saw Blade - D0436X

Ideal For:

• Ripping & Crosscutting
• Smooth finish crosscuts in hardwood, softwood, or plywood

Tool Use:Trim Saw

Materials: Wood Cutting

5-3/8" x 36 Tooth Finish Saw Blade - D0536X

Ideal For:

• Ripping & Crosscutting
• Smooth finish crosscuts in hardwood, softwood, or plywood

Tool Use:Trim Saw

Materials: Wood Cutting

6" x 40 Tooth Finish Saw Blade - D0640X

Diablo's thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. Diablo's trim saw blade is proven to extend run time on Porter Cable®, Saw Boss, and similar trim saws.

Ideal For:

• Ripping & Crosscutting
• Smooth finish crosscuts in hardwood, softwood, or plywood

Tool Use:Trim Saw

Materials: Wood Cutting

6-1/2" x 40 Tooth Finishing / Plywood Trim Saw Blade - D0641X

Ideal For:

• Remodeling / Demolition , Siding / Decking
• Smooth finish crosscuts in hardwood, softwood, or plywood

Tool Use:Circular Saw

Materials: Wood Cutting

7-1/4" x 40 Tooth Finish Saw Blade - D0740X

Ideal For:

• Ripping & Crosscutting
• Smooth finish crosscuts in hardwood, softwood, or plywood
• Remodeling / Demolition , Siding / Decking
• Wet Lumber

Tool Use:Circular Saw

Materials: Wood Cutting

7-1/4" x 60 Tooth Ultra Finish Saw Blade - D0760X

Diablo's Ultra Finish Blades offer the quality that fine cabinetmakers expect with the capability to handle the extreme conditions of professional construction. Diablo's blade produces a remarkably clean, chip-free cut that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, veneer plywood and delicate molding.

Ideal For:

• Ripping & Crosscutting
• Ultra Finish crosscuts and rip cuts in wood, plywood & melamine
• Trim, Remodeling / Demolition , Siding / Decking

Tool Use:Circular Saw

Materials: Wood Cutting

8" to 8-1/4" x 40 Tooth Finish Saw Blade - D0840X

Ideal For:

• Ripping & Crosscutting
• Smooth finish crosscuts in hardwood, softwood, or plywood
• Remodeling / Demolition , Siding / Decking

Tool Use:Circular Saw

Materials: Wood Cutting

8-1/2" x 60 Tooth Fine Finish Saw Blade - D0860S

Diablo's Fine Finish blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and molding. (Blades ending in “S” are also ideal for radial arm saws). 8-1/2" diameter x 6 tooth ATB with 5/8" arbor.

Ideal For:

• Ripping & Crosscutting
• High quality crosscuts and rip cuts in wood, plywood & melamine
• Trim, Remodeling / Demolition , Siding / Decking

Tool Use:Circular Saw

Materials: Wood Cutting

10" x 60 Tooth Fine Finish Saw Blade - D1060X

Fine Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and molding. 15 Degree hook angle.

Ideal For:

• Cabinets & Furniture
• High quality crosscuts and rip cuts in wood, plywood & melamine
• Trim, Remodeling / Demolition

Tool Use:Chop / Miter , Table Saw

Materials: Wood Cutting

10" x 80 Tooth Ultra Finish Saw Blade - D1080X

Ultra Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Flawless crosscuts in wood with minimal rework. Flawless finish in melamine & veneered plywood.

Ideal For:

• Cabinets & Furniture
• Fine finish crosscuts in Hardwoods & Softwoods. Chip free cuts in Veneered Plywood, Melamine, & MDF
• Trim, Remodeling / Demolition

Tool Use:Chop / Miter , Table Saw

Materials: Wood Cutting

10" x 90 Tooth Ultimate Flawless Finish Saw Blade - D1090X

Diablo’s Ultimate Flawless Finish saw blades with Axial Shear Face Grind (ASFG) tooth geometry delivers precise, splinter-free cuts on fine molding with no rework required. These new blades include break-through innovation that allows the blade to effortlessly glide through material while providing the smoothest finish.

Ideal For:

• Fine Trim & Molding
• Flawless crosscuts in wood with minimal rework.
• Flawless finish in melamine & veneered plywood
• Trim, Remodeling / Demolition

Tool Use:Chop / Miter , Slide Miter, Table Saw

Materials: Wood Cutting

12" x 100 Tooth Ultimate Flawless Finish Saw Blade D12100X

Diablo’s Ultimate Flawless Finish saw blades with Axial Shear Face Grind (ASFG) tooth geometry delivers precise, splinter-free cuts on fine molding with no rework required. These new blades include break-through innovation that allows the blade to effortlessly glide through material while providing the smoothest finish.

Ideal For:

• Fine Trim & Molding
• Flawless crosscuts in wood with minimal rework.
• Flawless finish in melamine & veneered plywood
• Trim, Remodeling / Demolition

Tool Use:Chop / Miter , Slide Miter

Materials: Wood Cutting

10" x 80 Tooth Fine Finish Saw Blade - D1280X

Fine Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and molding. 15 Degree hook angle.

Ideal For:

• Cabinets & Furniture
• Fine finish crosscuts in Hardwoods & Softwoods.
• Chip free cuts in Veneered Plywood, Melamine, & MDF
• Trim, Remodeling / Demolition

Tool Use:Chop / Miter , Slide Miter

Materials: Wood Cutting