Tablesaws & Accessories

10" Industrial Thin Stock Non-Ferrous Metal Blade

This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

• Premium TiCo™ HI-Density Carbide Non-Ferrous Blend for Maximum Performance
• Freud-Made TiCo™ Carbide specifically designed to cut nonferrous metals extends tooth life
• Positive Hook Angles produce a smoother cut with less material distortion and burr free cuts
• Silver Ice Coating resists corrosion and pitch build-up

12" Industrial Thin Stock Non-Ferrous Metal Blade

This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

• Premium TiCo™ HI-Density Carbide Non-Ferrous Blend for Maximum Performance
• Freud-Made TiCo™ Carbide specifically designed to cut nonferrous metals extends tooth life
• Positive Hook Angles produce a smoother cut with less material distortion and burr free cuts
• Silver Ice Coating resists corrosion and pitch build-up

12" Industrial Thick Non-Ferrous Metal Blade

This heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended

• Premium TiCo™ HI-Density Carbide Non-Ferrous Blend for Maximum Performance
• Freud-Made TiCo™ Carbide specifically designed to cut nonferrous metals extends tooth life
• Unique Gullet Design reduces chip build-up, which can cause shoulder damage or breakage
• Silver Ice Coating resists corrosion and pitch build-up