|
|
A different way to turn bowls without having to drill holes in your wood is to
use cloth backed double faced tape to adhere the bowl blank to the faceplate of
your lathe. This works great if your bowl blank is balanced and true, the tape
will hold during the turning and finishing process. You can turn bowls up to 10
inches in diameter and 2 inches thick. For best results, always make sure that
your work surface areas are clean and free of dust and debris before placing
tape on the bowl blank. After you attach the blank to the faceplate you may want
to clamp it as well for an extra secure bond. Always remember to tug or push on
the bowl blank once it is installed on to the lathe to make sure you have a
secure bond before turning. Once completed with your turning project, use a wood
chisel to remove the bowl from the faceplate. Caution: make sure the bowl blank
is dry, do not use the tape on wet wood. Each tape dispenses 108 feet of double
stick tape.
Measurements: 1" x 36 Yards
|
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov.
