Call Toll Free 1-888-512-9069
Shopping Cart

The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible tool. Cutters are available in tungsten carbide, titanium nitride (TiN) and high speed steel (HSS) providing unsurpassed range to woodturners at every level.

An unprecedented collection of parts and cutters make it the most versatile and value added single tool concept on the market today. Among its many features TurnMaster incorporates a patented interchangeable cutter head that locks into three positions allowing for simple scraping and shear scraping options.

Benefits:

  • All cutters interchangeable with one tool
  • Indexable, patented cutting head for shear scraping
  • Interchangeable cutter head – no need to buy whole new tool
  • Flat underside for stability
  • High tensile torx screw/ key for quick cutter release

Dimensions:

  • The handled version is is 525mm (20 5/8") in length
  • The unhandled version i.e. the shank and head is 270 mm (10 5/8")
Robert Sorby TurnMaster System

For those who wish to turn their own handle the diameter and length of the tang are as follows:

  • Diameter is 13mm (1/2")
  • Length of tang is 55mm (2 1/8")

Robert Sorby
TurnMaster / RSTM-HT123
Handled with #1, 2 & 3 HSS Cutters

SORBY TURNMASTER #RSTM-HT123

High Speed Steel Cutters.

The handled version of Sorby's versatile TurnMaster Tool with all three (round, detail point, and square)

The Robert Sorby TurnMaster is the first wood turning tool in the world to combine three cutting edge technologies in one amazingly versatile tool. It's collection of available parts and cutters make it the most flexible and value added single turning tool on the market today. The TurnMaster will accept any of 3 standard cutters (square, round, or detail), as well as a wide range of other cutting tips which have been specially configured to work with it.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
11033 TurnMaster Handled HSS Cutters / #RSTM-HT123 $129.99

Robert Sorby
TurnMaster / RSTM-ST123
Un-Handled with #1, 2 & 3 HSS Cutters

Robert Sorby TurnMaster / RSTM-ST123

High Speed Steel Cutters.

The un-handled (shank only) version version of Sorby's versatile TurnMaster Tool with all three (round, detail point, and square)

The Robert Sorby TurnMaster is the first wood turning tool in the world to combine three cutting edge technologies in one amazingly versatile tool. It's collection of available parts and cutters make it the most flexible and value added single turning tool on the market today. The TurnMaster will accept any of 3 standard cutters (square, round, or detail), as well as a wide range of other cutting tips which have been specially configured to work with it.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
11032 TurnMaster Un-Handled HSS Cutters / RSTM-ST123 $119.99

Robert Sorby
TurnMaster / RSTM-HCT123
Handled with #1, 2 & 3 Carbide Cutters

SORBY TURNMASTER #RSTM-HCT123

Tungsten Carbide cutters.

The handled version of Sorby's versatile TurnMaster Tool with all three (round, detail point, and square) Tungsten Carbide cutters.

The Robert Sorby TurnMaster is the first wood turning tool in the world to combine three cutting edge technologies in one amazingly versatile tool. It's collection of available parts and cutters make it the most flexible and value added single turning tool on the market today. The TurnMaster will accept any of 3 standard cutters (square, round, or detail), as well as a wide range of other cutting tips which have been specially configured to work with it.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
11035 TurnMaster Handled Carbide Cutter / RSTM-HCT123 $144.99

Robert Sorby
TurnMaster / RSTM-SCT123
Handled with #1, 2 & 3 Carbide Cutters

SORBY TURNMASTER RSTM-SCT123

Tungsten Carbide cutters.

The un-handled (shank only) version of Sorby's versatile TurnMaster Tool with all three (round, detail point, and square) Tungsten Carbide cutters.

The Robert Sorby TurnMaster is the first wood turning tool in the world to combine three cutting edge technologies in one amazingly versatile tool. It's collection of available parts and cutters make it the most flexible and value added single turning tool on the market today. The TurnMaster will accept any of 3 standard cutters (square, round, or detail), as well as a wide range of other cutting tips which have been specially configured to work with it.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
11034 TurnMaster Un-Handled Carbide Cutter / RSTM-SCT123 $134.99

 

Robert Sorby TurnMaster Cutters & Accessories

 

Robert Sorby
TURNMASTER HEAD

TURNMASTER HEAD

A replacement cutter head for Sorby's versatile TurnMaster Tool. Makes switching from one cutter type to another much faster and easier than changing the cutter alone.

Works with any of Sorby's handled or un-handled TurnMaster shanks and will accept any of the specially configured TurnMaster cutters.

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
11036 TURNMASTER HEAD / RSTM-HEAD $27.99

Robert Sorby
TurnMaster Tip Holder

SORBY #RSTM-TH TURNMASTER TIP HOLDER

This handy little sharpening accessory allows you to hold comfortably nearly every TurnMaster tip without fear of catching the cutting tip or even more importantly, your finger in a sharpening belt or grinding wheel.

Holder is just over 5-1/2" long.

The Holder has a narrow tip with a fastening screw that will hold your cutter at any angle so you can grind safely. The tip of the holder is narrow, so as not to get in the way.

Designed for the Sorby ProEdge Sharpening System

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
11037 TurnMaster Tip Holder / RSTM-TH $9.99

Robert Sorby
TurnMaster Cutters

Tungsten Carbide Cutters:

Makes light work of tough materials and is extremely hard wearing and long lasting. Although designed as a throwaway item it can be sharpened.

  • Sharpens to 0.7 micros
  • 90 RC hardness
High Speed Steel Cutters:

The super fine grain structure will provide a razor sharp edge. The result is a superior finish to your turning projects and less need for sanding. Can be easily be sharpened on traditional sharpening machines such as bench grinders or the Robert Sorby ProEdge Sharpening System,

  • Sharpens to 0.2 - 0.4 microns
  • 62 RC hardness
  • M2 Sheffield High Speed Steel
(TiN) Titanium Nitride Plasma Bonded Coating:

TiN is bonded onto quality HSS. It provides the same advantages as HSS while enhancing the cutting life close to that of tungsten carbide. Use the same traditional sharpening equipment used for HSS.

  • Sharpens to 0.15 - 02 microns
  • 85 RC hardness
  • TiN coated HSS
California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Type Sorby# Description Price Quantity
11038 RSTM-CT1 Tungsten Carbide Round cutter $19.99
11039 RSTM-CT2 Tungsten Carbide Detail point cutter $19.99
11040 RSTM-CT3 Tungsten Carbide Square cutter $19.99
11041 RSTM-TIP1 HSS Round cutter $14.50
11042 RSTM-TIP2 HSS Detail point cutter $14.50
11043 RSTM-TIP3 HSS Square cutter $14.50
11044 RSTM-TIP4 HSS French curve / inside cutter $14.50
11045 RSTM-TIP5 HSS Box / Dovetail cutter $14.50
11046 RSTM-TIP6 HSS Teardrop / inside / outside cutter $14.50
11047 RSTM-TIP7 HSS Mushroom cutter $14.50
11048 RSTM-GT1 TiN - Excelsior Round cutter $17.50
11049 RSTM-GT2 TiN - Excelsior Detail point cutter $17.50
11050 RSTM-GT3 TiN - Excelsior Square cutter $17.50
11051 RSTM-GT4 TiN - Excelsior French curve / inside cutter $17.50
11052 RSTM-GT5 TiN - Excelsior Box / Dovetail cutter $17.50
11053 RSTM-GT6 TiN - Excelsior Teardrop / inside / outside cutter $17.50
11054 RSTM-GT7 TiN - Excelsior Mushroom cutter $17.50

Robert Sorby
TurnMaster Pack of Four High Speed Steel Cutters

Robert Sorby TurnMaster Pack of Four Cutters 
High Speed Steel / TIP4567

A pack of four high speed steel cutters. The pack contains a French Curve, perfect for shear scraping inside forms such as egg cups and goblets, a Teardrop, a popular cutter choice ideal for a range of finishing sweeping cuts inside or outside forms, a Mushroom cutter, great for undercutting and Dovetail or box scraper, an model choice for creating parallel side walls and 90 degree corners in boxes.

Sharpening:
Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt, or on a grinding wheel using a standard abrasive material. Sharpens to: 0.2 -0.4 microns Hardness: 62 RC Material: M2 HSS

California Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item# Description Price Quantity
11140 Robert Sorby TurnMaster Pack of Four Cutters High Speed Steel / TIP4567 $49.00
Follow Us...
www.ptreeusa.com is owned and operated as a marketing resource of Peachtree Woodworking Supply Inc. , Atlanta, GA