Wood Turning Accessories

Large 3 Piece Carbide Replacement Cutters

Turn Mid-Size to Large Projects
Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don’t have to sharpen tools when they become dull over time. Another advantage is that they are ready to go right out of the box! No more making sure your brand new tool is sharp enough to start turning.
›See more product details

×

Large 3 Piece Carbide Replacement Cutters

Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don’t have to sharpen tools when they become dull over time. Another advantage is that they are ready to go right out of the box! No more making sure your brand new tool is sharp enough to start turning. Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. When the carbide cutter finally dulls, simply loosen the screw that holds the cutter in place, rotate the cutter to a sharp, clean edge and then secure the cutter by tightening the screw.

Razor sharp, easy to install 3 pc carbide cutter set

When our turning tools need to be sharpened we all have to bit the bullet so to speak and sharpen our tools Not only is the sharpening process time consuming, its truly just downright boring. If you own carbide tipped turning tools, like the Savannah 3 piece large carbide set, then you know how convenient and easy to use this type of tool is to use in comparison. Not only is this type of tool easy to use, when the cutter dulls you simply loosen the screw and rotate the cutter to a fresh, sharp edge! Once the cutter is completely used up, simply purchase another economical 3 piece cutter set!

Fits Savannah Carbide Turning Tools and Most Every Other Major Brand!

These three cutters have been designed to replace the 3 cutters that come with the Savannah 3 piece large carbide turning tool set. However, the Savannah 3 piece cutter set may work with many other brands of carbide turning tools that you may already have in your shop. This cutter set comes with two screws that are sized for Savannah turning tools, but depending on your turning tool thread size, you may need to use the screws that came with your turning tools to properly secure these cutters on to your current brand.

Round Carbide Cutter

Round cutters are primarily designed for finishing cuts, especially on inside curves of bowls and spindles. This cutter shape also works well for shaping and hollowing bowls.

Square Carbide Cutter

Square cutters are generally used for roughing out material and for that reason they are sometimes referred to as a rougher tool or cutter. They are ideally used on flat or convex surfaces and they remove more material than the round or diamond shape cutters.

Diamond Shaped Mini Cutter

The diamond shaped carbide cutter is designed for putting the final details on your project such as small beads and coves on both spindle and bowls. Along with the lighter detail cuts, this cutter shape can also be used for roughing, finishing and cutting chuck tenons.

Razor Sharp Edges

The great thing about carbide cutters is that when an edge gets used and becomes dull, all you have to do is rotate the cutter for a fresh, clean, razor sharp edge!

These three cutters have been designed to replace the 3 cutters that come with the Savannah 3 piece large carbide turning tool set. However, the Savannah 3 piece cutter set may work with many other brands of carbide turning tools that you may already have in your shop. This cutter set comes with two screws that are sized for Savannah turning tools, but depending on your turning tool thread size, you may need to use the screws that came with your turning tools to properly secure these cutters.

We offer the cutters in a 3 pack that includes 1 each of the most commonly used profiles. This pack also includes 2 screws for securing the cutters to the tool. Please note: the screws in this pack may or may not properly fit your turning tool. This means you must use the screws that came with your original turning tool.

Close

Large Carbide Cutter Set Includes:

• 1 ea. Round Carbide Cutter
• 1 ea. Square Carbide Cutter
• 1 ea. Diamond Carbide Cutter
• 2 ea. Screws

Note: Works with most name brand carbide cutting tools

Square Carbide Cutter Ci1-SQ

The Square Cutter is your best choice for when you need a square shoulder cut such as for cutting tenons.

Features:

• Ci1-SQ cutter designed to fit full and pro size roughers; .580" square by .100" thick, 8-32 screw
• The perfect grade of carbide produces the best combination of sharpness and durability
• Optimal grinding process produces the flattest and truest cutting surfaces
• The right geometry or cutting angle is ground to the produce an edge that cuts cleanly and safely.

4" Radius Carbide Cutter Ci1-R4

The R4 (Radius 4") cutter is your best choice for heavy hogging cuts.

Features:

• Ci1-R4 cutter designed to fit Easy Wood Tools Full and Pro Easy Roughers / Savannah Large Roughers / Carter Axe Roughers
• The perfect grade of carbide produces the best combination of sharpness and durability
• Optimal grinding process produces the flattest and truest cutting surfaces
• The right geometry or cutting angle is ground to the produce an edge that cuts cleanly and safely.

2" Radius Carbide Cutter Ci1-R2

The R2 (Radius 2") cutter is your best choice for final passes on outside curves and making pens from start to finish.

Features:

• Ci1-R2 cutter designed to fit Easy Wood Tools Full and Pro Easy Roughers / Savannah Large Roughers / Carter Axe Roughers
• The perfect grade of carbide produces the best combination of sharpness and durability
• Optimal grinding process produces the flattest and truest cutting surfaces
• The right geometry or cutting angle is ground to the produce an edge that cuts cleanly and safely.

Negative Rake Carbide Cutter

Easy Wood Tools is the only turning company that makes its own carbide. Their proprietary formula is the sharpest, hardest and longest-lasting in the industry. The standard carbide provides a neutral rake, which is the angle of a cutter relative to its cutting surface. These cutters start sharp and stay sharper longer to reduce catches and blowouts. Negative Rake for Resins & Hardwoods.

Features:

• Greatly reduces chipping and catches when turning resins and acrylic materials
• Fantastic results when turning very hard woods - very smooth finishing cuts
• Very effective for hollowing, allows for smooth, controlled catch-free passes
• Made to fit Easy Wood Tools

Round Carbide Cutter Ci0

The round cutters on the easy finishers are primarily designed for light finishing cuts, exspecially on inside curves of bowls and spindles. This cutter shape also works well for shaping and hollowing bowls.

Features:

• Ci0 cutter designed to fit full and pro size finishers; .625" diameter by .110" thick, 8-32 screw
• The perfect grade of carbide produces the best combination of sharpness and durability
• Optimal grinding process produces the flattest and truest cutting surfaces
• The right geometry or cutting angle is ground to the produce an edge that cuts cleanly and safely.

Negative Rake Carbide Cutter

Easy Wood Tools is the only turning company that makes its own carbide. Their proprietary formula is the sharpest, hardest and longest-lasting in the industry. The standard carbide provides a neutral rake, which is the angle of a cutter relative to its cutting surface. These cutters start sharp and stay sharper longer to reduce catches and blowouts. Negative Rake for Resins & Hardwoods.

Features:

• Ci0-NR cutter designed to fit Easy Wood Tools Easy Finishers & Full Size and Pro Tools / Savannah Large Finisher Tools / Carter Axe Finishing Tools
• Greatly reduces chipping and catches when turning resins and acrylic materials
• Fantastic results when turning very hard woods - very smooth finishing cuts
• Very effective for hollowing, allows for smooth, controlled catch-free passes
• Made to fit Easy Wood Tools

Diamond Shape Cutter Ci4

The diamond shaped carbide cutter are designed for putting the final details on your project such as small beads and coves on both spindle and bowls. Along with the lighter detail cuts, this cutter shape can also be used for roughing, finishing and cutting chuck tenons.

Features:

• Ci4 cutter designed to fit All Easy Wood Tools Easy Detailer Tools / Savannah Large & Mini Detailers, Carter Axe & Axe Hybrid Detailers
• The perfect grade of carbide produces the best combination of sharpness and durability
• Optimal grinding process produces the flattest and truest cutting surfaces
• The right geometry or cutting angle is ground to the produce an edge that cuts cleanly and safely.

Negative Rake Carbide Cutter

Easy Wood Tools is the only turning company that makes its own carbide. Their proprietary formula is the sharpest, hardest and longest-lasting in the industry. The standard carbide provides a neutral rake, which is the angle of a cutter relative to its cutting surface. These cutters start sharp and stay sharper longer to reduce catches and blowouts. Negative Rake for Resins & Hardwoods.

Features:

• Greatly reduces chipping and catches when turning resins and acrylic materials
• Fantastic results when turning very hard woods - very smooth finishing cuts
• Very effective for hollowing, allows for smooth, controlled catch-free passes
• Made to fit Easy Wood Tools

The AXE™
Diamond Shape Carbide Cutter

Designed for putting the final details on your project such as small beads, coves, detail cuts, roughing, finishing and cutting chuck tenons.

The Diamond Shape Carbide Cutter Fits:

• The AXE™ Full Size Diamond Carbide Tipped Tool
• All Easy Wood Tools Easy Detailer Tools
• Savannah Large & Mini Detailers

The AXE™
Round Carbide Cutter

The Round Cutter is your best choice for light finishing and inside curves. Fits The AXE™ Full Size Round Carbide Tipped Tool / Easy Wood Tools Full and Pro Easy Finishers / Savannah Large Finishing Tool.

The Round Carbide Cutter Fits:

• The AXE™ Full Size Diamond Carbide Tipped Tool
• All Easy Wood Tools Easy Detailer Tools
• Savannah Large & Mini Detailers

The AXE™
Square Carbide Cutter

The Square Cutter is your best choice for when you need a square shoulder cut such as for cutting tenons.

The Square Shape Carbide Cutter Fits:

• The AXE™ Full Size Square Carbide Tipped Tool
• Easy Wood Tools Full and Pro Easy Roughers
• Savannah Large Roughers

The AXE™
Radius Square Carbide Cutter

The Radius Square Cutter is your best choice for final passes on outside curves and making pens from start to finish.

The Square Shape Carbide Cutter Fits:

• The AXE™ Full Size Square Carbide Tipped Tool
• Easy Wood Tools Full and Pro Easy Roughers
• Savannah Large Roughers