Workbench Vice & Stands

×

Clamp Vise

Multipurpose Vise System for Wood Projects
The Clamp Vise combines a 3" Bench Clamp with an anodized-aluminum plate that mounts to the edge of a benchtop to create a simple, highly effective bench vise. It’s great for clamping pieces on edge, supported by adjustable Clamp Blocks, and for holding large pieces on top of a bench like a traditional end vise using a pair of included Bench Dogs.

Auto-Adjust Technology

Thanks to Automaxx® Auto-Adjust Technology, the Bench Clamp adjusts to match the material automatically with a simple squeeze of the handles—whether the material is thick, thin, or in between. The clamp allows easy regulation of clamping pressure with a simple thumbscrew.

Easy-to-Regulate Clamping Pressure

Easily regulate clamping pressure with a simple thumbscrew. Just set your desired pressure by turning the thumbscrew for more or less pressure. Once the pressure is set, the clamp maintains consistent clamping pressure with every thickness.

×

Magnetic Vice Jaw Pads

When we use our metal jaw vises, we typically will use it to work on flat stock pieces. If we try to grip round stock with the flat, metal vise jaws, its usually not very stable. Any type of downward or side pressure usually knocks the stock piece out of the jaws or out of place. The Reversible Magnetic Vise Pads remedy this problem with matched grooves on each pad. The grooves align perfectly so your vise can now comfortably and securely grip round stock pieces without issue.

Another issue with metal vises, is that they will dig into and mar our round and even flat work pieces. This is especially true when working with softer metals, wood and other materials. These pads eliminate this problem as well since they are made from a receptive nylon material and not metal. This means our woodworking, tooling, gunsmith, automotive, jewelry, fishing tackle, bicycle, plumbing and hobby projects can now all be secured in our vise without worrying about marking them.

Multi-Purpose - Multi-Functional

We all use our vises to hold our projects in place so we can work on them. They do a fantastic job at this with a few exceptions of course. One of those exceptions is round stock pieces tend to slip or move around when we apply pressure on them while in the vise. This can be super irritating and sometimes dangerous. These pads fix this issue with matching grooved pads the allow you to securely hold your stock in place without it slipping or moving The pads also have a flat side for standard stock pieces. Unlike the metal crosshatched or waffle patterned vise jaws, these pads are smooth and they won't streak or mar your projects The pads will accept any type of material from metal, to soft wood.

Round, Flat or Curved... These pads will hold it

Designed with versatility in mind, these pads will securely hold round, curved and flat objects. It doesn't matter if it is wood, plastic, or metal, it will hold it. The grooves on the pads are designed to hold round, tubular items while the flat side of the pads will work with curved and flat objects.

Vertical and Diagonal

Holding stock vertically and diagonally in a secure position in a standard vise can be annoying at best. Typically, when we apply any sort of pressure on the workpiece it moves and defeats the purpose of the vise in the first place. These pads make holding your pieces in the vertical and horizontal position a reality. There are two groove sizes ( a small and a large groove) for each the vertical and diagonal grooves.

Horizontal

While clamping a round piece horizontally in your vise may work better than vertically or diagonally, it still has a tendency to slip when pressure is applied. Our pads once again will eliminate this issue by providing you with a single horizontal groove running right through the center of the pads. This makes quick cutoffs a breeze when working with wooden dowels or even copper pipes.

Secure Round Stock

Each pad has two different sides. One side is flat for accepting flat or semi-curved stock pieces. This side works exceptionally well for general woodworking projects and hobbyists. The flat side keep workpieces from being marred and keeps them stable while working.

Secure Flat Stock

The other side of the pads are prismatic, v-grooved pads that will accept round tube stock pieces with ease. It makes holding and working on pipes, dowels, threaded stock, barrels, automotive pieces and more super easy.

Keep it clean

We have all experienced the disappointment of working on a piece and everything looks great. That is until we loosen the vise only to see the crosshatched or waffle pattern from the vise embedded on to our project. These pads help to prevent that since they do not have any sort of pattern on them and they are made from a more receptive and forgiving nylon material. This material makes these pads ideal for hard, solid objects like metal barrels and works just as well on softer projects like wooden dowels.