Abrasives / Sanding

2" Dual Bearing Bowl Sander
with 40 Assorted 2" Discs

When you need to finish sand the inside of your wood turned bowl it can be a challenge to keep the wood from showing scuff marks. Using a piece of hand held sandpaper can also be somewhat dangerous. Our bowl sander essentially fixes this issue by having a dual bearing, smooth rotating head that spins with the rotation of the bowl while the bowl is rotating on the lathe. The 9 inch long handle also helps keep your hands out of harms way. The head assembly is completely adjustable so it can be set to any angle that you need depending on the size and curve of the project.
›See more product details

×

2" Dual Bearing Bowl Sander

with 40 assorted discs

When you need to finish sand the inside of your wood turned bowl it can be a challenge to keep the wood from showing scuff marks. Using a piece of hand held sandpaper can also be somewhat dangerous. Our bowl sander essentially fixes this issue by having a dual bearing, smooth rotating head that spins with the rotation of the bowl while the bowl is rotating on the lathe. The 9 inch long handle also helps keep your hands out of harms way.

We have included the most common diameter sanding head with the bowl sander. This sander head is made from a foam material that gives just enough to provide you with wonderful looking results each time you sand your projects. This 2" head size works well on most bowl turning projects since it can work with larger or smaller work pieces. Also included 10 ea. 80 grit, 10 ea. 120 grit, 10 ea. 150 grit and 10 ea. 220 grit hook and loop sanding discs.

Dual Bearings Equal Better Performance and Smoother Rotation

Most handled bowl sanders have maybe one bearing or no bearing at all on the head assembly. Without a bearing, the rotation of the sanding mandrel can get choppy at best when trying to sand while your project is spinning on a lathe. Our bowls sander has two smooth rotating bearings that produce much less friction than sanders without bearings. This means you will achieve much better results finishing your project using our Dual Bearing Bowl Sander

Keep it moving...

One of the keys to properly using these types of sanders, is to keep the tool moving while sanding on a rotating wood lathe. This ensures that the sander doesn't over heat or mistakenly mark you wood. Included with the sander are full color instructions that help guide you with the correct techniques and proper way to use the sander to achieve the best results possible.

It's All About the Touch...

When your project is rotating on your lathe, its already creating friction without touching it. When you start sanding, your essentially doubling the amount of friction and more since the sandpaper grit creates its own friction. When using the bowl sander its all about the touch when sanding on your lathe. Lightly touch the sander to the rotating bowl using the bottom of the sanding disc. Work your way from the rim or lip of your project to the center of the bowl. Once you get the hang of it, you'll be producing wonderfully finished projects in no time!

Have a Favorite Sander with 1/4" Mandrel?

A unique feature is that you can easily swap out sanders by simply loosening the set screw on the main brass bushing. Once loose, you can remove the original sander and either use a different diameter sander or a sander with a 1/4" mandrel that you feel comfortable with. We have included the hex key wrench and an extra short bushing that is used for shorter length sander mandrels.

40 Discs Clearly Marked

Over the years we noticed many, many customers complaining about the grits in a lot of kits are almost impossible to tell apart. While it is rather difficult to mark each disc clearly on either side, we decided to package each grit in packs of 10 with the grit clearly marked for you to identify each grit in seconds!

Close

Features:

• Completely adjustable head assembly
• Two steel bearings provide super smooth mandrel rotation
• The head assembly is also capable of accepting other size sanders as long as the mandrel/shank size is 1/4 inch in diameter.
• Includes 10 ea. 80 grit, 10 ea. 120 grit, 10 ea. 150 grit and 10 ea. 220 grit hook and loop sanding discs.

Bowl Sander Replacements

Heavy duty foam pads are flexible enough to follow the contours of your turnings and durable so they resist tearing. Used by bowl turners and by anyone who needs to smooth out small details. The hook and loop discs are lubricated to resist loading. The body is made of a full resin composite material to stand up to heavy use. 3 different sizes: 1", 2", and 3"

Features:

• Heavy foam pads are flexible enough to follow contours of your turnings.
• Durable so they resist tearing.
• Hook & Loop setup for easy grit changes.
• For use with portable electric drills, MAX 1750 RPM.

Each Size Bowl Sander Kit includes:

• 1 ea. Mandrel
• 1 ea. Bowl Sanding Disc - 80 grit
• 1 ea. Bowl Sanding Disc - 120 grit
• 1 ea. Bowl Sanding Disc - 150 grit
• 1 ea. Bowl Sanding Disc - 220 grit

Master Bowl Sander Kit

Our 1”, 2” and 3” Sanders are perfect for getting in those tight radiuses that regular sanders cannot. Typical Disc holders are hard and rigid and won't allow you to sand or get into curved areas. Whether the curve is convex or concave the soft thick pad on our sanders allows you to easily work those areas.
›See more product details

×

Master Bowl Sander Kit

Our 1”, 2” and 3” Sanders are perfect for getting in those tight radiuses that regular sanders cannot. Typical Disc holder are hard and rigid and won't allow you to sand or get into curved areas. Whether the curve is convex or concave the soft thick pad on our sanders allow you to easily work those areas. Works great for woodworkers and even on some automotive applications.

15 Piece Sanding Disc and Soft Foam Mandrel Set Includes

• 1 ea. 1" Mandrel
• 1 ea. 2" Mandrel
• 1 ea. 3" Mandrel
• 1 ea. 1" Bowl Sander Disc - 80 Grit
• 1 ea. 1" Bowl Sander Disc - 120 Grit
• 1 ea. 1" Bowl Sander Disc - 150 Grit
• 1 ea. 1" Bowl Sander Disc - 220 Grit

• 1 ea. 2" Bowl Sander Disc - 80 Grit
• 1 ea. 2" Bowl Sander Disc - 120 Grit
• 1 ea. 2" Bowl Sander Disc - 150 Grit
• 1 ea. 2" Bowl Sander Disc - 220 Grit
• 1 ea. 3" Bowl Sander Disc - 80 Grit
• 1 ea. 3" Bowl Sander Disc - 120 Grit
• 1 ea. 3" Bowl Sander Disc - 150 Grit
• 1 ea. 3" Bowl Sander Disc - 220 Grit

Hook and Loop Sanding Discs

Each mandrel has a 1/4" shank with a soft thick pad with a hook and loop (velcro) end to easily attach and remove hook and loop discs. The heavy duty foam pads are flexible enough to follow the contours of your turnings or any surface you need to work. They are durable so they resist tearing. Hook and loop sanding disc's make for quick disc grit changes.

Follow the Contours of Your Turnings

The heavy duty foam pads are flexible enough to follow the contours of your turnings or any surface you need to work. They are durable so they resist tearing. Hook and loop sanding disc's make for quick disc grit changes.

Close

Features:

• Ideal For Wood Turners, Bowl Sanding, Contour Sanding, Convex or Concave Surfaces
• The soft sponge on the sander allows the sandpaper to conform to the shape you are sanding.
• flexible heavy duty foam pads are
• Hook and loop sanding discs make for quick disc grit changes.
• Can be used on portable electric drills, flexible shaft or on even your drill press.
• Each mandrel has a 1/4" shank with a soft thick pad with a hook and loop end.
• 15 Piece Set
• Includes 12 sanding discs

Master Platinum Bowl Sander Kit

Perfect for Sanding Wooden Bowls, Platters and More. Sanding curved surfaces like wooden bowls can be challenging and can take a long time to finish when sanding by hand. Sanding your project by hand can also cause fatigue and produce unsatisfactory results. The ¼” shank sanding mandrels have a thick padded base that conforms to concave or convex surfaces. Simply secure the mandrel into a variable speed drill or flexible shaft and you’re ready to go. 129 Piece Set
›See more product details

×

Master Platinum Bowl Sander Kit

Perfect for Sanding Wooden Bowls, Platters and More. Sanding curved surfaces like wooden bowls can be challenging and can take a long time to finish when sanding by hand. Sanding your project by hand can also cause fatigue and produce unsatisfactory results. The ¼” shank sanding mandrels have a thick padded base that conforms to concave or convex surfaces. Simply secure the mandrel into a variable speed drill or flexible shaft and you’re ready to go. 129 Piece Set

The Complete Disc Sanding System with 1", 2" and 3" Sizes with Corresponding Interface Pads

While some sanding disc sanding systems come with a ridiculous amount of cheap sandpaper discs, they are also typically only available in one diameter size. This forces you to buy all 3 common sizes separately. Our kit comes with a 1" mandrel, a 2" mandrel and a 3" mandrel. Our kit also includes a soft interface pad and a medium firmness interface made for each size mandrel. Oh yeah, our kit also includes 120 total quality hook and loop gold sanding discs.

Designed for Sanding Curved Surfaces

When sanding curved surfaces like those found on lathe turned wooden bowls, it is important to have just the right touch when contacting the project. The sanders are designed to allow you to work and sand curved surfaces with the aid of an electric hand held power sander. Typically a variable speed drill works best with these sanders especially since it allows your to effortlessly control the speed of the mandrels rotation. This allows you to gain more control of the sander and gives you a much better feel than standard style drills. Each mandrel has a thick foam base with a hook and loop pad which accepts any corresponding size hook and loop sanding disc. The mandrels measure 1/4" in diameter which is perfect for most standard 3/8" drill chuck size. These sanders can also be used with flexible shaft chucks as well.

Stack em' However You Like em'!

Stack all of the included interface pads or don't use any if you like. All you need to do is get a good feel for each pad and what works best for you and your projects. The two interface pads are medium and soft in overall firmness respectively. Typically we would use both for tighter or more delicate sanding projects, while using the sanding mandrel with its firm base pad can be used a bit more aggressively. Each pad is lined with a hook and loop top and bottom for easy attachment and removal when needed.

Whats in the package?

• 1 ea. 1" Mandrel
• 10 ea. 1" Disc 80 Grit
• 10 ea. 1" Disc 120 Grit
• 10 ea. 1" Disc 150 Grit
• 10 ea. 1" Disc 220 Grit
• 1 ea. 1" Soft Pad
• 1 ea. 1" Med Pad

• 1 ea. 2" Mandrel
• 10 ea. 2" Disc 80 Grit
• 10 ea. 2" Disc 120 Grit
• 10 ea. 2" Disc 150 Grit
• 10 ea. 2" Disc 220 Grit
• 1 ea. 2" Soft Pad
• 1 ea. 2" Med Pad

• 1 ea. 3" Mandrel
• 10 ea. 3" Disc 80 Grit
• 10 ea. 3" Disc 120 Grit
• 10 ea. 3" Disc 150 Grit
• 10 ea. 3" Disc 220 Grit
• 1 ea. 3" Soft Pad
• 1 ea. 3" Med Pad

Close

Features:

• Perfect for Sanding Wooden Bowls, Platters and More
• Uni-Body Construction
• Thick Heavy Duty Flexible Foam Base
• Kit Includes 1", 2" and 3" diameter Mandrels with Corresponding Size Abrasive Discs
• Comes with Medium and Soft Interface Pads
• Extra Flexibility by changing interface pads
• One Piece Mandrel Works in Both Directions
• 129 Piece Set

Bowl Sander Mandrels

Our Bowl Sander Mandrels are perfect for getting in those tight radiuses that regular sanders cannot. The soft sponge on the Bowl Sander allows the sandpaper (sold separately) to conform to the shape you are sanding. This in combination with the spinning mandrel help produce wonderful finishes to your turned bowl or even spindles.

Features:

• Soft sponge on the Bowl Sander allows the sandpaper to conform to the shape you are sanding
• Perfect for getting in those tight radiuses

Mandrels come in three sizes:

• 1" Bowl Sander Mandrel
• 2" Bowl Sander Mandrel
• 3" Bowl Sander Mandrel

Heavy Duty Contour Sander

Sanding bowls on your lathe doesn't have to be difficult or tedious. The Savannah Adjustable Bowl Sanding System makes bowl sanding easier, quicker and will improve your end result. Perfect for use on small bowls, large bowls, platters, hardwoods, softwoods, and on the inside or outside of bowls
›See more product details

×

Heavy Duty Contour Sander

Sanding bowls on your lathe doesn't have to be difficult or tedious. The Savannah Adjustable Bowl Sanding System makes bowl sanding easier, quicker and will improve your end result. The unique rotating head is driven by the rotation of your workpiece and your fingers will never contact the workpiece, The foam hook and loop faced pad conforms to the shape of your turning so the abrasive disc always stays in contact with the bowl profile. This makes the Heavy Duty Contour Sander perfect to us on small bowls, large bowls, platters, hardwoods, softwoods, and on the inside or outside of bowls. The head can be swapped out between 2" or 3" size.

System Includes

• 1 ea. Heavy Duty Handle
• 1 ea. 2" Sander with Firm Foam Head
• 1 ea. 2" Sander with Soft Foam Head
• 1 ea. 3" Sander with Firm Foam Head
• 1 ea. 3" Sander with Soft Foam Head
• 10 ea. 80 Grit 2"
• 10 ea. 150 Grit 2"
• 10 ea. 240 Grit 2"

• 10 ea. 320 Grit 2"
• 10 ea. 400 Grit 2"
• 10 ea. 80 Grit 3"
• 10 ea. 150 Grit 3"
• 10 ea. 240 Grit 3"
• 10 ea. 320 Grit 3"
• 10 ea. 400 Grit 3"
• 1 ea. Wrench

Close

System Includes:

• 1 ea. Heavy Duty Handle
• 1 ea. 2" Sander with Firm Foam Head
• 1 ea. 2" Sander with Soft Foam Head
• 1 ea. 3" Sander with Firm Foam Head
• 1 ea. 3" Sander with Soft Foam Head
• 1 ea. Wrench

Sandmaster

An extremely handy addition to any turner's armoury, the Sandmaster is used in conjunction with a lathe to put a fine finish on turned pieces. It eliminates the unsightly lines often associated with traditional hand sanding. As the disc is spinning it also reduces the clogging of the abrasive. The Sandmaster comes complete with a velcro covered 2" sponge pad which allows for the easy changing of abrasive discs.
›See more product details

×

Sandmaster

An extremely handy addition to any turner's armoury, the Sandmaster is used in conjunction with a lathe to put a fine finish on turned pieces. It eliminates the unsightly lines often associated with traditional hand sanding. As the disc is spinning it also reduces the clogging of the abrasive. The Sandmaster comes complete with a velcro covered 2" sponge pad which allows for the easy changing of abrasive discs. A variety of grits - from 60 - 400 - of aluminium oxide disc can then be quickly attached. The adjustable head which runs on a durable phospor bronze bushing lets the turner reach even the more inaccessable spots. As an optional extra, a 3" head and discs can be easily fitted for greater efficiency. The Sandmaster becomes an even more versatile tool when the head is removed and replaced by a pigtail mandrel and goblet or bowl mop. Made of fine grade cotton these mops are an ideal medium for buffing waxes and other finishes.

The Kit Includes:

• Sandmaster
• 2" Sanding Pad
• 10 - 2" Abrasive Disks
  • 2 ea. 60 Grit Disc
  • 2 ea. 120 Grit Disc
  • 2 ea. 180 Grit Disc
  • 2 ea. 240 Grit Disc
  • 2 ea. 400 Grit Disc
• Hex Wrench

Close

Sandmaster Includes:

• Sandmaster
• 2" Sanding Pad
• 10 - 2" Abrasive Disks
  • 2 ea. 60 Grit Disc
  • 2 ea. 120 Grit Disc
  • 2 ea. 180 Grit Disc
  • 2 ea. 240 Grit Disc
  • 2 ea. 400 Grit Disc
• Hex Wrench

The Ultimate Sanding System

Are you like most woodturners and tired of the velcro on your bowl sander wearing out from the continuous cycle of ripping the sandpaper on & off to add another grit until the sanding Disc will not attach any longer because the velcro hooks wore down? You now have the perfect solution to that problem with the versatile Roloc System. Save time and save money! All these items sold separately would easily cost nearly $200 elsewhere making this deal a no brainer.
›See more product details

×

The Ultimate Sanding System

Are you like most woodturners and tired of the velcro on your bowl sander wearing out from the continuous cycle of ripping the sandpaper on & off to add another grit until the sanding Disc will not attach any longer because the velcro hooks wore down?

You now have the perfect solution to that problem with the versatile Roloc System. Instead of ripping the sanding discs on & off you simply unscrew the holder from the stem/mandrel leaving that grit sanding disc on it and screw another holder on with a different grit. By replacing the holder instead of the sanding disc, not only does the holders velcro last a lot longer it also increases the sanding disc life. Just keep the same sanding disc on the same holder until it finally wears out and then replace it. Just incase you damage the holder or finally do wear out the velcro, the package includes replacement hook velcro with industrial adhesive backing to fix it.

The package also includes a 10mm thick intermittent pad for extra softness for tight curves on smaller projects. You can also use a 3" holder on a 2" stem/mandrel for extra flex. Lastly, if you need to do some hand sanding, these holders are easy to grab and will get into the tight spaces.

Save time and save money! All these items sold separately would easily cost nearly $200 elsewhere making this deal a no brainer.

Package Includes:

• 1 ea. 3" Roloc Stem sanding pad stem/mandrel - connect to a drill and holds the 3" sanding pad
• 1 ea. 2" Roloc Stem sanding pad stem/mandrel - connect to a drill and holds the 2" sanding pad
• 5 ea. 3" Sanding pad holders - These are thick foam pads for holding 3" sanding disc
• 5 ea. 2" Sanding pad holders - These are thick foam pads for holding 2" sanding disc
• 5 ea. 3" dia. Intermittent 10mm thick soft sanding pad holders - add for tight curves
• 5 ea. 2" dia. Intermittent 10mm thick soft sanding pad holders - add for tight curves
• 5 ea. 3" Velcro repair discs. - for if you damage your sanding pad or finally wear it out
• 5 ea. 2" Velcro repair discs. - for if you damage your sanding pad or finally wear it out

Close

Package Includes:

• 1 ea. 3" Roloc Stem sanding pad stem/mandrel
• 1 ea. 2" Roloc Stem sanding pad stem/mandrel
• 5 ea. 3" Sanding pad holders
• 5 ea. 2" Sanding pad holders
• 5 ea. 3" dia. Intermittent 10mm thick soft sanding pad holders
• 5 ea. 2" dia. Intermittent 10mm thick soft sanding pad holders
• 5 ea. 3" Velcro repair discs.
• 5 ea. 2" Velcro repair discs.

Flex Edge Wavy Sanding Disc

Select a Size:

Bowl Sander Backing Pads

These backing pads protect your disc holder by mounting between the holder and sanding disc. In the event a disc spins off the holder, the backing pad will prevent damage to the disc holder. These backing pads work with exactly the degree of stiffness and resilience that best suits the job at hand. Designed for Hook & Loop disc and pads.

The Soft Backing Pad is designed to use in areas where you need tighter angle sanding and/or for smaller projects. The soft pad can also be used for detail work.

The Medium Backing Pad is used on softer angles/curves and can get into the lighter detail work. The medium backing pad gives you a little more stiffness than the soft backing pad, but is softer than the bowl sander mandrel.

Wavy Sanding Disc

Designed as a non-aggressive finishing system, the wavy edge design of the Wave sanding discs eliminates the ridges frequently caused by traditional round discs while producing an excellent finish. "Fingers" around the disc gently blend surfaces in trouble areas where stationary sanding is required. Wave backing pads support the entire surface of the disc by matching the profile of the disc. Hook & Loop.

Features:

• Flexible backing
• Conforms smoothly to curves
• Made of J Grade sandpaper
• May be used on standard foam disks

New Wave Abranet Disc

Abranet is a revolutionary product for vacuum-assisted sanding operations. The new, patented disc will fundamentally change your work environment. Sold in packs of 10.

Features:

• Hook and loop design.
• Aluminum Oxide - durable and long lasting.
• Resin over resin bonding.
• Thousands of small holes for dust free sanding with vacuum assist.
• Better work environment.
• Mesh Grip Disc (Grip = Hook & Loop)

Available Grits:

Micro-Mesh™
Cushioned Abrasives
Bowl Sanding Disc

These 1”, 2” and 3” bowl sanding discs are a incredibly fine abrasive that are perfect for virtually any type of contour sanding. Wood Turners use them for a polish sheen and a beautiful lustrous finish coatings. Use for bowl turning or any small project. Hook & Loop Disc.

9 Packs of Micro-Mesh bowl sanding discs:

1 ea. 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12000 grit disc.

18 Packs of Micro-Mesh bowl sanding discs:

2 ea. 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, and 12000 grit disc.

Scuff & Buff Ball Replacement Pads

The Scuff & Buff Ball Replacement Pads come 10 each to a pack. Just unscrew the shank, remove old pads, add all 10 new replacement pads to shank and tighten back down.

Available Grits:

• 60 Grit (Tan)
• 180 Grit (Green)
• 320 Grit (Maroon)
• 600 Grit (Gray)
• Non-Abrasive for Polishing (White)