Clamps & Accessories

Straight Edge Clamp

Pro Grip Straight Edge Clamps are the perfect combination of clamp and edge guide. Think of it - instant accuracy for cross-cutting and routing up to 50"! Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw.
›See more product details

×

Straight Edge Clamp

Pro Grip Straight Edge Clamps are the perfect combination of a clamp and an edge guide. Think of it - instant accuracy for cross-cutting and routing. Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw. The Pro Grip Straight Clamps feature an extruded aluminum body that is light weight and durable.

The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps on the market. Low profile jaws (that never get in the way) are perfect for sanding and routing projects. Get straight and accurate cuts, dados and grooves simply by aligning the clamp on your marks, securing the clamp and make the cut. The jaws firmly hold any piece to the full length of the clamp without any side-to-side play. The smooth cam lock is a one-hand operation and has 3 varying levels of pressure for just the right amount of Grip.

Cut Straight on Large or Small Panels

The ProGrip Straight Edge Guide Clamps are the perfect solution for cutting larger panels down to size. With the unique clamping assembly along with the rigid aluminum rails, you'll be getting your projects done in no time. The ProGrip Clamps also provide you with a better way of cutting sheet goods. Typically we may use a table saw to do so, but we all know how cumbersome the large sheets can be, especially when its only one of us doing the work.

Cut Dados All Day Long!

Cutting dado slots for shelves can be challenging. The ProGrip Straight Edge Guide Clamps are the ideal way for cutting dados accurately and cleanly with your hand held router. Simply align and set the clamp exactly where you need it to be, then rout the dado slot. It truly is that easy!

Contractor Grade Clamps Made for Accurate, Straight Cuts

Contractor Grade Materials
Each ProGrip Straight Edge Guide Clamp is made from a single piece of extruded aluminum. The extrusion has been designed to be extra rigid as well as lightweight. Perfect for the everyday rigors on the job site or around the workshop.

Cut Straight Lines
Every Time
It doesn't matter if you're using a circular saw, a router or even a trim router the results are the same. Simply make sure your ProGrip Straight Edge Guide Clamp is properly aligned and secure and you will be making straight cuts ever time you use it!

Extra Width
For More Rigidity
The ProGrip Straight Edge Guide Clamps have an extra wide rail. This gives you more surface are to work with accessories or shop made jigs and fixtures you create. Both sides of the rail have identical track profiles making the clamp even more versatile.

Attach ProGrip Clamps quicker and easier than most clamps!

Close

Features:

• Made from extruded aluminum for light weight and maximum durability.
• The unique 2-3/16" wide tube rail construction keeps the PRO-Grip™ Clamps light and easy to use, yet more rigid than other similar clamps on the market.
• Low profile jaws (that never get in the way)
• Get straight and accurate cuts, dados and grooves.
• The unbreakable jaws firmly hold any piece to the full length of the clamp without any side-to-side play.
• Clamp may be fastened together back-to-back or side-to-side using the appropriate kits (sold separately) for increased versatility.

3 Piece PRO-Grip™ Clamp Package

3 Piece Starter Package

The singles package include PRO-GRIP's™ most popular single clamps at an economical price. Use the Starter Package for combination edge guide and glue-ups

Pack Includes:

• 1- 24" straight edge clamp
• 1- 36" straight edge clamp
• 1- 50" straight edge clamp

If purchased separately $134.97

*Shipping Note: May require additional shipping charges due to being oversized.

180° Lever Straight Edge Clamp

The 180° clamp triple cam lock lever rotates conveniently out of the way when using the clamp on a table top surface. Flip the lever in the down position, then rotate the lever 180° clamp to the up position and secure your stock or jig. This prevents the handle from interfering with your work bench or stock in any position. The 180° clamp also works just like our standard PRO-GRIP™ straight edge clamp.

Twin Clamp

These PRO-Grip™ Twin Clamps are like having two PRO-Grip™ singles Clamps attached side by side. The PRO-Grip™ Twin clamps allow you to attach one side of clamp to the table or bench top and the other side to attach your project to be firmly held in place while you do your sanding, routing, carving and even allows you to do panel glue ups. These clamps can also be used as straight edges making them truly versatile.

Back to Back Clamps

Pro-Grip™ Back to Back are similar to the PRO-Grip™ back to back clamps Use the PRO-Grip™ Back to Back clamps for a variety of applications, from glue ups to sanding, these clamps will help you get the job done. This low profile clamp will become one of your favorite tools in the shop. Attach two Pro-grip™ back to back clamps to your work bench and then attach your stock to the top jaw. This turns your work surface into a large vise, which will allow you to perform, glue ups, sanding and even routing. With the low profile jaws your work surface is never obstructed.

• Use for a variety of applications from glue ups to sanding.
• Attach two back to back clamps to your work bench
• Attach your stock to the top jaws turning your work surface into a large vise
• The back to back can also be taken apart forming two separate clamps

*Shipping Note: May require additional shipping charges due to being oversized.

5 Piece PRO-Grip™ Clamp Package

5 Piece Deluxe Package

The 5 Piece Deluxe package includes 5 of PRO-GRIP's™ most popular clamps at an economical price. The Deluxe Package to turns your work surface into a large vise, which will allow you to perform, glue ups, sanding and even routing.

Pack Includes:

• 1- 24" straight edge clamp
• 1- 36" straight edge clamp
• 1- 50" straight edge clamp
• 2- 50" back to back clamps

If purchased separately $252.95

*Shipping Note: May require additional shipping charges due to being oversized.

Adjustable Guide System

The PRO-Grip™Adjustable Guide System gives you the accuracy and convenience of a panel saw with the portability of a straight edge guide. Cut large and small stock without having to mess with C-clamps or make shift straight edges. You can make 90° cuts on large or small sheets of stock, as well as tapered or angled cuts with total precision. This System also works with routers, jigsaws and even laminate trimmers.
›See more product details

×

Adjustable Guide System

The PRO-Grip™Adjustable Guide System gives you the accuracy and convenience of a panel saw with the portability of a straight edge guide. Cut large and small stock without having to mess with C-clamps or make shift straight edges. You can make 90° cuts on large or small sheets of stock, as well as tapered or angled cuts with total precision.

Versatility

The PRO-Grip™ Adjustable Guide System also works with routers, jigsaws and even laminate trimmers.

360° Guide Clamps

The key to the PRO-Grip Angle Guide is the patent pending 360° guide clamps. Unlike C-Clamps or F-clamps the head of the 360° clamp rotates to allow the pad of the clamp to be secured firmly to your stock without interfering with the cutting process. This unique feature allows you to set the wide body straight edge at any angle.

The Perfect Fit

The Adjustable Guide attachment fits neatly into the built-in track of the PRO-Grip Wide Body Guide and secures with two knobs.

Positive Stops Built In

The Adjustable Guide has positive stops built into the unit at: 0,15, 22½, 30, 45 and 90 degrees. This makes it easy to achieve the angles you need by simply sliding the gauge to the desired angle and locking it into place.

Superior Durability

The PRO-Grip™ Wide Body Guide is 62” long and made from extruded aluminum that is 5” wide to provide superior durability and no deflection during the cutting process.

Accommodate Almost Any Size Stock

Built into the straight edge is a series of tracks that will accept any PRO-Grip accessory, some of which you may already own. The 360° guide clamps can be slid to any point along the under side of the wide body straight edge guide to accommodate almost any size stock without interfering with the cutting process.

Close

Includes:

• 1 ea. 62" Long x 5" wide Aluminum Track
• 1 ea. Adjustable Guide
• 2 ea. 360° Guide Clamps

*Shipping Note: May require additional shipping charges due to being oversized.

Adjustable Guide Combo Pack

The Adjustable Guide Combo Pack is to be used with the PRO-Grip Wide body Guide (Not Included) or any Pro-Grip Straight Edge Clamp (Not Included). Attaching these two accessories to your PRO-Grip Wide Body Guide or Pro-Grip Straight edge Clamp will allow you to perform 90° cuts as well as angle or tapers on large and small sheets of stock. The 360° clamps rotate to allow the pad of the clamp to be secured firmly to your stock without interfering with the cutting process. The Adjustable Guide attachment fits neatly into the built-in track of your PRO-Grip Clamp and secures with two knobs.

It has positive stops built into unit at:
0°, 15°, 22-1/2°, 30°, 45° and 90°.

Includes:

• 1 ea. Adjustable Guides
• 2 ea. 360° Guide Clamps

Note: If you are using a Pro-Grip Straight Edge clamp, some disassembly is required for proper function.

360° Guide Clamps - 2 Pack

The PRO-Grip™ 360° Guide Clamps can be used with any style PRO-Grip™ Clamp with some disassembly of the clamp. They heads allow for 360° rotation for creating any desired angle with your straight edge clamp.

Click the PDF link and follow step 1 thru 3 in the instructions for disassembling clamp and then add 360° Guide Clamps and your ready to go.

Note: Click the PDF link and follow steps 1 thru 3 in the instructions for disassembling the clamp and then add 360° Guide Clamps and your ready to go.