Tablesaws & Accessories

Deluxe Featherboard

Anyone who has a table saw or router table should seriously consider having at least one featherboard. Most workshops have more than one handy at any given time. Featherboards are simple devices that help keep your stock up against the fence you're running your stock on. They generally act like a third hand by helping you control your stock while you push your stock through.
›See more product details

×

Deluxe Featherboard

What is a featherboard you might ask? Is it something I need for my workshop? Well, the short answer is yes. Anyone who has a table saw or router table should seriously consider having at least one. Most workshops have more than one handy at any given time. Featherboards are simple devices that help keep your stock up against the fence you’re running your stock on. They generally act like a third hand by helping you control your stock while you push your stock through

Featherboards also help in preventing accidental kickback since they keep consistent pressure on your stock which helps you gain more control. The Fulton Deluxe Featherboard is unique since it can be mounted two different ways. You can mount it into a standard ¾" x 3/8" miter slot with the aluminum Miter Lock Bar. It can also be mounted into a t-track slot using the included t-bolts. This allows you to use it horizontally or vertically depending on your tabletop or fence setup.

Versatile, Easy to Use and It Helps Prevent Dangerous Kick Backs

The Fulton Deluxe Featherboard comes packed with features to make your routing or table saw cutting process more efficient and productive. Starting with the aluminum miter bar locks have been designed to make locking the featherboard into a miter slot much easier than with older model featherboards. We have also included two t-bolts so the featherboard can be mounted to t-track slots. Large knobs make securing the featherboard much easier than with featherboards with tiny t-knobs. Finally, the Fulton Deluxe Featherboard has rigid feathers to keep your stock up against your fence or firmly down against your tabletop surface so you can work with confidence knowing that you basically have a third hand working with you. The feathers not only keep your stock where it supposed to be, they also help prevent kick back since your stock doesn't have the chance to move or slide out of position.

Make Narrow Cuts on Your Table Saw or Router Table

As woodworkers we tend to use every last inch of material and sometimes projects simply call for narrow cuts or narrow strips to be milled. Featherboards are great tools for ripping narrow stock and milling narrow pieces on your router table. The feathers are specifically designed to help keep your stock from drifting which gives you the ability to feed the narrow stock through the cutters without it moving in or out during the cutting process.

Lock it In...

When it comes to securing the featherboard into a miter track or slot, we made very easy. With the completely re-designed expandable miter bar and large, easy to rotate knob, this featherboard can be secured in seconds! No more fussing with those, small, hard to adjust miter bars you find on most featherboards.

Keep Your Distance

When placing setting up the featherboard, make sure that the featherboard is completely behind the blade or cutter. This ensures that the pressure on the stock is toward the fence or the table top which in turn prevents the stock you are cutting from pinching into the blade or cutter.

Close

Features:

• Versatile
  Easy to Use and It Helps Prevent Dangerous Kick Backs
• Make Narrow Cuts on Your Table Saw or Router Table
  Featherboards are great tools for ripping narrow stock and milling narrow pieces on your router table.
• Lock it In...
  With the completely re-designed expandable miter bar and large, easy to rotate knob, this featherboard can be secured in seconds!

Dual Deluxe Stackable Featherboards

The Fulton Dual Deluxe Stackable Featherboards can be used as one unit or can be separated and used for vertical and horizontal applications. When the featherboards are stacked with the included 2" tall spacers, you'll have a full 3-7/8" worth of holding pressure height. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence.
›See more product details

×

Dual Deluxe Stackable Featherboards

What is a featherboard you might ask? Is it something I need for my workshop? Well, the short answer is yes. Anyone who has a table saw or router table should seriously consider having at least one. Most workshops have more than one handy at any given time. Featherboards are simple devices that help keep your stock up against the fence you’re running your stock on. They generally act like a third hand by helping you control your stock while you push your stock through.

The Fulton Dual Deluxe Stacked Featherboard can be used as one unit or can be separated and used for vertical and horizontal applications. When the featherboards are stacked with the included 2" tall spacers, you'll have a full 3-7/8" worth of holding pressure height. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence.

Stackable and Versatile

The Fulton Dual Deluxe Stackable Featherboards can be used as one unit or can be separated and used for vertical and horizontal applications. When the featherboards are stacked with the included 2" tall spacers, you'll have a full 3-7/8" worth of holding pressure height. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence

Tall Stock

When we need to cut taller stock, we of course need support at high points to keep the stock stable while feeding it through. The dual stack featherboard set up does just this. No more teetering when feeding your tall stock on your re-saw projects.

Got to keep em' separated

In certain cases, separating the featherboards will be necessary. When the time comes to separate the featherboards, simply loosen the large knobs all the way until they can be removed for the long bolts. Once removed, the featherboards can be separated and used individually on your router table, band saw or table saw as needed.

Keep Your Distance

When placing setting up the featherboard, make sure that the featherboard is completely behind the blade or cutter. This ensures that the pressure on the stock is toward the fence or the table top which in turn prevents the stock you are cutting from pinching into the blade or cutter.

Close

Features:

• Versatile
  Easy to Use and It Helps Prevent Dangerous Kick Backs
• Tall Stock
  When we need to cut taller stock, we of course need support at hight points to keep the stock stable while feeding it through. The dual stack featherboard set up does just this. No more teetering when feeding your tall stock on your re-saw projects.

True-Flex™ Featherboard

The True-FLEX™ Featherboard gets its name from the careful engineering that went into its design. Many featherboard's on the market today apply too much pressure or not enough pressure to the work piece, resulting in imperfect cuts and less than safe operation. We've designed each finger of the True- FLEX™ featherboard to provide a consistent and optimum pressure, and to stand up to years of use in your wood shop.
›See more product details

×

True-Flex™ Featherboard

The True-FLEX™ Featherboard gets its name from the careful engineering that went into its design. Many featherboard's on the market today apply too much pressure or not enough pressure to the work piece, resulting in imperfect cuts and less than safe operation.

Consistent and Optimum Pressure

We've designed each finger of the True- FLEX™ featherboard to provide a consistent and optimum pressure, and to stand up to years of use in your wood shop.

Durable Plastic Composite Body

The featherboard is made from an extremely durable plastic composite body and even includes an exclusive wedge-lock system which allows the featherboard to be secured to a variety of shop tools without the need for additional hardware.

Work With Confidence

Whether you're using a miter-slot or a t-slot, working on a table saw or a router table, the wedge-lock system adjusts accordingly and lets you work with confidence.

Close

Features:

• Carefully designed fingers apply optimum pressure
• Wedge-Lock™ hardware for miter slot and T-slot compatibility
• Durable plastic composite body

Small Fence Featherboard

#1136 This Small Featherboard is a great hold down for, router table fences, drill press fences and much more, plus anti-kickback. Best used with a 7/16" T-Slot for use with 1/4" hex head bolts.

#3302 Small Featherboard with hardware kit allows you to use the featherboard in T-Slot & standard tabletop miter slot (3/8" x 3/4")

Features:

• This small featherboard works on a table surface towards a fence.
• Also works on the fence down to the tabletop.
• Comes with two 1/4" hex head bolts and two knobs

Featherboard Size: 3/8" x 3-1/4" x 7-1/2"

Adjustment: approx. 2" up and down

Large Fence Featherboard

#1137 This Large Featherboard is a great hold down for, router table fences, drill press fences and much more, plus anti-kickback. Best used with a 7/16" T-Slot for use with 1/4" hex head bolts.

#3303 Large Featherboard with hardware kit allows you to use the featherboard in T-Slot & standard tabletop miter slot (3/8" x 3/4")

Features:

• Mounts in standard 1/4" X t-track
• Two 1/4" hex head bolts and two knobs included
• Great hold down power plus anti-kickback
• Fits most anything, router table fences, drill press fences and much more

Featherboard Size: 3/8" x 7-1/4" x 8"

Adjustment: approx. 5" up and down

X- Large Fence Featherboard

#1138 This X-Large Featherboard is a great hold down for, router table fences, drill press fences and much more, plus anti-kickback. Best used with a 7/16" T-Slot for use with 1/4" hex head bolts.

#3304 X-Large Featherboard with hardware kit allows you to use the featherboard in standard tabletop miter slot (3/8" x 3/4")

Features:

• Best used with a 7/16" T-Slot for use with 1/4" has head bolts.
• Convert for use on tabletops with miter slot using Miter-Slot Jig & fixture set
• Includes 2 ea. 1/4" x 20 knob and bolts

Featherboard Size: 3/8" x 8-1/2" x 8-1/2"

Adjustment: approx. 8-1/2" up and down

Deluxe Wooden Featherboard

Features

• Quick positioning feather board keeps stock tight against fence & flat to the saw table.
• Prevents chatter and dangerous kick-back.
• Fits into standard 3/4" x 3/8" miter slots with a quick twist of the knob.
• 4-1/2" adjustment slot, 9/16" thick x 1-3/4" wide x 10" long.

Safety Guard Featherboard

This featherboard is the perfect solution for router table fences limited in space. It not only keeps your stock firmly against your table top, it acts as a router bit safety guard as well. The unique outward curve design keeps your fingers away from the cutters while feeding your stock through the cut and will not interfere with the router bit while cutting. The featherboard measures a full 101/4" long x 3" high.

Features:

• Measures 10 1/4" long x 3" high
• Solution for router table fences limited in space
• keeps your stock firmly against your table top
• Acts as a router bit safety guard as well
• Keeps your fingers away from the cutters while feeding your stock through the cut
• Will not interfere with router bit while cutting

Includes:

• 1 ea. Safety Guard Featherboard

Miter T-Track Locking Kit

Use this miter slot locking kit to lock custom jigs and fixtures in any t-slot groove. We found it quite handy to lock all types of featherboards onto table saws, router tables and band saws. The t-bar will fit any 3/4" x 3/8" miter t-slot groove or our Standard MITER-T-TRACK.

The Fixture Kit includes:

• 2 ea. T-Slot Pieces
• 2 ea. 1/4"-20 Bolts
• 2 ea. Round Knobs
• 1 ea. Nylon Locking Knob

Note: Featherboard not included.

Fixture Locking Kit

The perfect accessory kit for attaching featherboard, hold-downs or virtually any type of jig you can think of to your table saw, router table, or any tool with a standard 3/4" x 3/8" miter gauge slot. The fixture kit works by applying outward pressure to the "walls" of the miter gauge slot. The "wedge" bolts push up into center counter sunk holes in the miter bar as they tighten with the star knobs, which pushes the center of the miter bar outward producing a nice tight fit.

The Fixture Kit includes:

• 2 ea. expandable 4 3/4" long miter bars
• 2 ea. star knobs
• 2 ea. wedge bolts
• 2 ea. washers
• Can be used with stock up to 1-1/4" thick

FeatherBoard™

Features

• Consistent tension holds workpieces securely against the power tool’s fence when cutting or mitering
• Unique pre-load tension design allows consistent cuts with reduced chance of kickback
• Ergonomic knobs help prevent over-tightening and are easy to loosen
• Split-rail miter-bar construction provides maximum hold
• 3/4″ and 5/8″ wide miter bars and T-slot bolts
• Mounting hardware included for nearly any operation
• Can be mounted to the left or the right of the blade

D/T FeatherBoard™

Features

• Designed to hold workpieces securely against the power tool’s fence when cutting or mitering
• Ergonomic knobs help prevent over-tightening and are easy to loosen
• Mounting hardware included for nearly any dual or tandem operation
• Unique pre-load tension design allows consistent cuts with reduced chance of kickback
• Split-rail miter bar construction provides maximum hold
• 3/4″ and 5/8″ wide miter bars and T-slot bolts included
• Can be mounted to the left or the right of the blade